From: Michael Krufky Date: Wed, 9 Jul 2008 03:23:08 +0000 (-0300) Subject: V4L/DVB (8530): au0828: add support for new revision of HVR950Q X-Git-Tag: v2.6.27-rc1~31^2~18 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=59d27521c0f50fadf3382e2b325a7e8a04d9a770;p=linux-2.6 V4L/DVB (8530): au0828: add support for new revision of HVR950Q Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index 86d1c8e7b1..eedc399e8d 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -2,3 +2,4 @@ 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008] 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] + 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index 52b2491581..ed9a50f189 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -6,6 +6,7 @@ config VIDEO_AU0828 select VIDEO_TVEEPROM select DVB_AU8522 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Auvitek's USB device. diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 898e12395e..443e590097 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -32,6 +32,9 @@ struct au0828_board au0828_boards[] = { [AU0828_BOARD_HAUPPAUGE_HVR950Q] = { .name = "Hauppauge HVR950Q", }, + [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = { + .name = "Hauppauge HVR950Q rev xxF8", + }, [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", }, @@ -49,6 +52,7 @@ int au0828_tuner_callback(void *priv, int command, int arg) switch (dev->board) { case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: + case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: case AU0828_BOARD_DVICO_FUSIONHDTV7: if (command == 0) { /* Tuner Reset Command from xc5000 */ @@ -110,6 +114,7 @@ void au0828_card_setup(struct au0828_dev *dev) switch (dev->board) { case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: + case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: if (dev->i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xa0); break; @@ -128,6 +133,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) switch (dev->board) { case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: + case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: /* GPIO's * 4 - CS5340 * 5 - AU8522 Demodulator @@ -193,6 +199,12 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x0fd9, 0x0008), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7201), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, + { USB_DEVICE(0x2040, 0x7211), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, + { USB_DEVICE(0x2040, 0x7281), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { }, }; diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h index e26f54a961..c37f5fd0fa 100644 --- a/drivers/media/video/au0828/au0828-cards.h +++ b/drivers/media/video/au0828/au0828-cards.h @@ -23,3 +23,4 @@ #define AU0828_BOARD_HAUPPAUGE_HVR950Q 1 #define AU0828_BOARD_HAUPPAUGE_HVR850 2 #define AU0828_BOARD_DVICO_FUSIONHDTV7 3 +#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4 diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index c6d4705903..584a83a94a 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -28,6 +28,7 @@ #include "au0828.h" #include "au8522.h" #include "xc5000.h" +#include "mxl5007t.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -45,6 +46,11 @@ static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .tuner_callback = au0828_tuner_callback }; +static struct mxl5007t_config mxl5007t_hvr950q_config = { + .xtal_freq_hz = MxL_XTAL_24_MHZ, + .if_freq_hz = MxL_IF_6_MHZ, +}; + /*-------------------------------------------------------------------*/ static void urb_completion(struct urb *purb) { @@ -342,6 +348,15 @@ int au0828_dvb_register(struct au0828_dev *dev) &dev->i2c_adap, &hauppauge_hvr950q_tunerconfig, dev); break; + case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + dvb->frontend = dvb_attach(au8522_attach, + &hauppauge_hvr950q_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(mxl5007t_attach, dvb->frontend, + &dev->i2c_adap, 0x60, + &mxl5007t_hvr950q_config); + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n");