From: Mauro Carvalho Chehab Date: Fri, 19 Oct 2007 09:59:33 +0000 (-0300) Subject: V4L/DVB (6386): Add support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTER X-Git-Tag: v2.6.25-rc1~1235^2~506 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=55c88610fe974c95a62e495305a7386aaac3df39;p=linux-2.6 V4L/DVB (6386): Add support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTER This board has some special tea5767 configuration. Basically, radio XTAL uses a different frequency than the other supported radios. It uses a 13 MHz XTAL. This patch adds the proper radio gpio and tea5767 configurations for the board. Also, with PAL/BG, the board requires some special init for tda9887: port1=0 port2=0 qss=1 Thanks to Serge Kolotylo and MIDImaster for their help on identifying the proper needs for this driver. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index a4eb6a87a7..f8a786ae47 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -26,6 +26,7 @@ #include #include "cx88.h" +#include "tea5767.h" static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; @@ -245,6 +246,10 @@ static const struct cx88_board cx88_boards[] = { }}, .radio = { .type = CX88_RADIO, + .vmux = 3, + .gpio0 = 0x000040bf, + .gpio1 = 0x000080c0, + .gpio2 = 0x0000ff20, }, }, [CX88_BOARD_WINFAST_DV2000] = { @@ -1979,6 +1984,23 @@ static void cx88_card_setup(struct cx88_core *core) core->name, i); } break; + case CX88_BOARD_MSI_TVANYWHERE_MASTER: + { + struct v4l2_priv_tun_config tea5767_cfg; + struct tea5767_ctrl ctl; + + memset(&ctl, 0, sizeof(ctl)); + + ctl.high_cut = 1; + ctl.st_noise = 1; + ctl.deemph_75 = 1; + ctl.xtal_freq = TEA5767_HIGH_LO_13MHz; + + tea5767_cfg.tuner = TUNER_TEA5767; + tea5767_cfg.priv = &ctl; + + cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg); + } } }