From: Ben Dooks Date: Sun, 22 Jul 2007 15:59:44 +0000 (+0100) Subject: [ARM] 4521/2: S3C: Reorganise VA mapping headers X-Git-Tag: v2.6.23-rc1~8^2^9~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=530ef3c2a92b3c6a9901ac7e04d1e6c0077a9f2d;p=linux-2.6 [ARM] 4521/2: S3C: Reorganise VA mapping headers Reorganise the definition of the virtual addresses used into a common header and update the users to rename S3C2410 items into a more common S3C defined macros. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 95b9aee547..b33ed3b05e 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -13,32 +13,19 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H -/* we have a bit of a tight squeeze to fit all our registers from - * 0xF00000000 upwards, since we use all of the nGCS space in some - * capacity, and also need to fit the S3C2410 registers in as well... - * - * we try to ensure stuff like the IRQ registers are available for - * an single MOVS instruction (ie, only 8 bits of set data) - * - * Note, we are trying to remove some of these from the implementation - * as they are only useful to certain drivers... - */ +#include -#ifndef __ASSEMBLY__ -#define S3C2410_ADDR(x) ((void __iomem __force *)0xF0000000 + (x)) -#else -#define S3C2410_ADDR(x) (0xF0000000 + (x)) -#endif +#define S3C2410_ADDR(x) S3C_ADDR(x) /* interrupt controller is the first thing we put in, to make * the assembly code for the irq detection easier */ -#define S3C24XX_VA_IRQ S3C2410_ADDR(0x00000000) +#define S3C24XX_VA_IRQ S3C_VA_IRQ #define S3C2410_PA_IRQ (0x4A000000) #define S3C24XX_SZ_IRQ SZ_1M /* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000) +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M @@ -51,7 +38,7 @@ #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000) +#define S3C24XX_VA_CLKPWR S3C_VA_SYS #define S3C2410_PA_CLKPWR (0x4C000000) #define S3C24XX_SZ_CLKPWR SZ_1M @@ -64,12 +51,12 @@ #define S3C24XX_SZ_NAND SZ_1M /* UARTs */ -#define S3C24XX_VA_UART S3C2410_ADDR(0x00400000) +#define S3C24XX_VA_UART S3C_VA_UART #define S3C2410_PA_UART (0x50000000) #define S3C24XX_SZ_UART SZ_1M /* Timers */ -#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000) +#define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M @@ -78,7 +65,7 @@ #define S3C24XX_SZ_USBDEV SZ_1M /* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000) +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2410_PA_WATCHDOG (0x53000000) #define S3C24XX_SZ_WATCHDOG SZ_1M @@ -96,7 +83,7 @@ * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO * is done as a 1:1 maping. This puts it (currently) at - * 0xF6800000, which is not in the way of any current mapping + * 0xFA800000, which is not in the way of any current mapping * by the base system. */ @@ -153,7 +140,6 @@ #define S3C2410_SDRAM_PA (S3C2410_CS6) - /* Use a single interface for common resources between S3C24XX cpus */ #define S3C24XX_PA_IRQ S3C2410_PA_IRQ diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h new file mode 100644 index 0000000000..95a82b0e84 --- /dev/null +++ b/include/asm-arm/plat-s3c/map.h @@ -0,0 +1,40 @@ +/* linux/include/asm-arm/plat-s3c/map.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - Memory map definitions (virtual addresses) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_H +#define __ASM_PLAT_MAP_H __FILE__ + +/* Fit all our registers in at 0xF4000000 upwards, trying to use as + * little of the VA space as possible so vmalloc and friends have a + * better chance of getting memory. + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + */ + +#define S3C_ADDR_BASE (0xF4000000) + +#ifndef __ASSEMBLY__ +#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) +#else +#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) +#endif + +#define S3C_VA_IRQ S3C_ADDR(0x000000000) /* irq controller(s) */ +#define S3C_VA_SYS S3C_ADDR(0x001000000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x002000000) /* system control */ +#define S3C_VA_TIMER S3C_ADDR(0x003000000) /* timer block */ +#define S3C_VA_WATCHDOG S3C_ADDR(0x004000000) /* watchdog */ +#define S3C_VA_UART S3C_ADDR(0x010000000) /* UART */ + +#endif /* __ASM_PLAT_MAP_H */ diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h index 8946702a87..923e114db6 100644 --- a/include/asm-arm/plat-s3c/regs-serial.h +++ b/include/asm-arm/plat-s3c/regs-serial.h @@ -32,10 +32,10 @@ #ifndef __ASM_ARM_REGS_SERIAL_H #define __ASM_ARM_REGS_SERIAL_H -#define S3C24XX_VA_UART0 (S3C24XX_VA_UART) -#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C24XX_VA_UART + 0xC000 ) +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) #define S3C2410_PA_UART0 (S3C24XX_PA_UART) #define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index 6f8fe432fe..8b0d594397 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -14,12 +14,12 @@ #ifndef __ASM_ARCH_REGS_TIMER_H #define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $" -#define S3C2410_TIMERREG(x) (S3C24XX_VA_TIMER + (x)) -#define S3C2410_TIMERREG2(tmr,reg) S3C2410_TIMERREG((reg)+0x0c+((tmr)*0x0c)) +#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) +#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) -#define S3C2410_TCFG0 S3C2410_TIMERREG(0x00) -#define S3C2410_TCFG1 S3C2410_TIMERREG(0x04) -#define S3C2410_TCON S3C2410_TIMERREG(0x08) +#define S3C2410_TCFG0 S3C_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C_TIMERREG(0x04) +#define S3C2410_TCON S3C_TIMERREG(0x08) #define S3C2410_TCFG_PRESCALER0_MASK (255<<0) #define S3C2410_TCFG_PRESCALER1_MASK (255<<8) @@ -71,9 +71,9 @@ /* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ -#define S3C2410_TCNTB(tmr) S3C2410_TIMERREG2(tmr, 0x00) -#define S3C2410_TCMPB(tmr) S3C2410_TIMERREG2(tmr, 0x04) -#define S3C2410_TCNTO(tmr) S3C2410_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) +#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) #define S3C2410_TCON_T4RELOAD (1<<22) #define S3C2410_TCON_T4MANUALUPD (1<<21) diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h index a9c5d491bd..56c4193b7a 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/include/asm-arm/plat-s3c/regs-watchdog.h @@ -14,11 +14,11 @@ #ifndef __ASM_ARCH_REGS_WATCHDOG_H #define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $" -#define S3C2410_WDOGREG(x) ((x) + S3C24XX_VA_WATCHDOG) +#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) -#define S3C2410_WTCON S3C2410_WDOGREG(0x00) -#define S3C2410_WTDAT S3C2410_WDOGREG(0x04) -#define S3C2410_WTCNT S3C2410_WDOGREG(0x08) +#define S3C2410_WTCON S3C_WDOGREG(0x00) +#define S3C2410_WTDAT S3C_WDOGREG(0x04) +#define S3C2410_WTCNT S3C_WDOGREG(0x08) /* the watchdog can either generate a reset pulse, or an * interrupt.