From: Alexander van Heukelum Date: Tue, 1 Apr 2008 15:47:57 +0000 (+0200) Subject: x86, UML: remove x86-specific implementations of find_first_bit X-Git-Tag: v2.6.26-rc1~1037^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5245698f665c4b7a533dcc47a5afdf33095d436a;p=linux-2.6 x86, UML: remove x86-specific implementations of find_first_bit x86 has been switched to the generic versions of find_first_bit and find_first_zero_bit, but the original versions were retained. This patch just removes the now unused x86-specific versions. also update UML. Signed-off-by: Alexander van Heukelum Signed-off-by: Ingo Molnar --- diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index be75560282..49990ea422 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -39,6 +39,10 @@ config ARCH_REUSE_HOST_VSYSCALL_AREA bool default y +config GENERIC_FIND_FIRST_BIT + bool + default y + config GENERIC_FIND_NEXT_BIT bool default y diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64 index 4ab5aa62ff..cc42e59585 100644 --- a/arch/um/Kconfig.x86_64 +++ b/arch/um/Kconfig.x86_64 @@ -34,6 +34,10 @@ config SMP_BROKEN bool default y +config GENERIC_FIND_FIRST_BIT + bool + default y + config GENERIC_FIND_NEXT_BIT bool default y diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 964dc1a04c..598b5c1903 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -6,7 +6,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \ ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \ sys_call_table.o tls.o -subarch-obj-y = lib/bitops_32.o lib/semaphore_32.o lib/string_32.o +subarch-obj-y = lib/semaphore_32.o lib/string_32.o subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o subarch-obj-$(CONFIG_MODULES) += kernel/module_32.o diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 3c22de5320..c8b4cce9cf 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -10,7 +10,7 @@ obj-y = bug.o bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \ obj-$(CONFIG_MODULES) += um_module.o -subarch-obj-y = lib/bitops_64.o lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o +subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o subarch-obj-$(CONFIG_MODULES) += kernel/module_64.o ldt-y = ../sys-i386/ldt.o diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 436093299b..76f60f52a8 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -21,7 +21,6 @@ else lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o lib-y += thunk_64.o clear_page_64.o copy_page_64.o - lib-y += bitops_64.o lib-y += memmove_64.o memset_64.o lib-y += copy_user_64.o rwlock_64.o copy_user_nocache_64.o endif diff --git a/arch/x86/lib/bitops_64.c b/arch/x86/lib/bitops_64.c deleted file mode 100644 index 568467d390..0000000000 --- a/arch/x86/lib/bitops_64.c +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef CONFIG_GENERIC_FIND_FIRST_BIT -#include - -#undef find_first_zero_bit -#undef find_first_bit - -static inline long -__find_first_zero_bit(const unsigned long * addr, unsigned long size) -{ - long d0, d1, d2; - long res; - - /* - * We must test the size in words, not in bits, because - * otherwise incoming sizes in the range -63..-1 will not run - * any scasq instructions, and then the flags used by the je - * instruction will have whatever random value was in place - * before. Nobody should call us like that, but - * find_next_zero_bit() does when offset and size are at the - * same word and it fails to find a zero itself. - */ - size += 63; - size >>= 6; - if (!size) - return 0; - asm volatile( - " repe; scasq\n" - " je 1f\n" - " xorq -8(%%rdi),%%rax\n" - " subq $8,%%rdi\n" - " bsfq %%rax,%%rdx\n" - "1: subq %[addr],%%rdi\n" - " shlq $3,%%rdi\n" - " addq %%rdi,%%rdx" - :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) - :"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL), - [addr] "S" (addr) : "memory"); - /* - * Any register would do for [addr] above, but GCC tends to - * prefer rbx over rsi, even though rsi is readily available - * and doesn't have to be saved. - */ - return res; -} - -/** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first zero bit, not the number of the byte - * containing a bit. - */ -long find_first_zero_bit(const unsigned long * addr, unsigned long size) -{ - return __find_first_zero_bit (addr, size); -} - -static inline long -__find_first_bit(const unsigned long * addr, unsigned long size) -{ - long d0, d1; - long res; - - /* - * We must test the size in words, not in bits, because - * otherwise incoming sizes in the range -63..-1 will not run - * any scasq instructions, and then the flags used by the jz - * instruction will have whatever random value was in place - * before. Nobody should call us like that, but - * find_next_bit() does when offset and size are at the same - * word and it fails to find a one itself. - */ - size += 63; - size >>= 6; - if (!size) - return 0; - asm volatile( - " repe; scasq\n" - " jz 1f\n" - " subq $8,%%rdi\n" - " bsfq (%%rdi),%%rax\n" - "1: subq %[addr],%%rdi\n" - " shlq $3,%%rdi\n" - " addq %%rdi,%%rax" - :"=a" (res), "=&c" (d0), "=&D" (d1) - :"0" (0ULL), "1" (size), "2" (addr), - [addr] "r" (addr) : "memory"); - return res; -} - -/** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first set bit, not the number of the byte - * containing a bit. - */ -long find_first_bit(const unsigned long * addr, unsigned long size) -{ - return __find_first_bit(addr,size); -} - -#include - -EXPORT_SYMBOL(find_first_bit); -EXPORT_SYMBOL(find_first_zero_bit); -#endif diff --git a/include/asm-x86/bitops_32.h b/include/asm-x86/bitops_32.h index ba2c0defaf..2e863021bf 100644 --- a/include/asm-x86/bitops_32.h +++ b/include/asm-x86/bitops_32.h @@ -4,64 +4,6 @@ /* * Copyright 1992, Linus Torvalds. */ - -#ifndef CONFIG_GENERIC_FIND_FIRST_BIT -/** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit number of the first zero bit, not the number of the byte - * containing a bit. - */ -static inline int find_first_zero_bit(const unsigned long *addr, unsigned size) -{ - int d0, d1, d2; - int res; - - if (!size) - return 0; - /* This looks at memory. - * Mark it volatile to tell gcc not to move it around - */ - asm volatile("movl $-1,%%eax\n\t" - "xorl %%edx,%%edx\n\t" - "repe; scasl\n\t" - "je 1f\n\t" - "xorl -4(%%edi),%%eax\n\t" - "subl $4,%%edi\n\t" - "bsfl %%eax,%%edx\n" - "1:\tsubl %%ebx,%%edi\n\t" - "shll $3,%%edi\n\t" - "addl %%edi,%%edx" - : "=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) - : "1" ((size + 31) >> 5), "2" (addr), - "b" (addr) : "memory"); - return res; -} - -/** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit number of the first set bit, not the number of the byte - * containing a bit. - */ -static inline unsigned find_first_bit(const unsigned long *addr, unsigned size) -{ - unsigned x = 0; - - while (x < size) { - unsigned long val = *addr++; - if (val) - return __ffs(val) + x; - x += sizeof(*addr) << 3; - } - return x; -} -#endif - #ifdef __KERNEL__ #include diff --git a/include/asm-x86/bitops_64.h b/include/asm-x86/bitops_64.h index 4081d7ecc2..cb23122d23 100644 --- a/include/asm-x86/bitops_64.h +++ b/include/asm-x86/bitops_64.h @@ -4,29 +4,6 @@ /* * Copyright 1992, Linus Torvalds. */ - -#ifndef CONFIG_GENERIC_FIND_FIRST_BIT -extern long find_first_zero_bit(const unsigned long *addr, unsigned long size); -extern long find_first_bit(const unsigned long *addr, unsigned long size); - -/* return index of first bet set in val or max when no bit is set */ -static inline long __scanbit(unsigned long val, unsigned long max) -{ - asm("bsfq %1,%0 ; cmovz %2,%0" : "=&r" (val) : "r" (val), "r" (max)); - return val; -} - -#define find_first_bit(addr, size) \ - ((__builtin_constant_p((size)) && (size) <= BITS_PER_LONG \ - ? (__scanbit(*(unsigned long *)(addr), (size))) \ - : find_first_bit((addr), (size)))) - -#define find_first_zero_bit(addr, size) \ - ((__builtin_constant_p((size)) && (size) <= BITS_PER_LONG \ - ? (__scanbit(~*(unsigned long *)(addr), (size))) \ - : find_first_zero_bit((addr), (size)))) -#endif - static inline void set_bit_string(unsigned long *bitmap, unsigned long i, int len) {