From: Scott Wood Date: Mon, 20 Aug 2007 16:36:19 +0000 (+1000) Subject: [POWERPC] Whitespace cleanup in arch/powerpc X-Git-Tag: v2.6.24-rc1~1450^2~321 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=4b218e9bb2fbbc57b5a05de41d77c056a134528c;p=linux-2.6 [POWERPC] Whitespace cleanup in arch/powerpc Signed-off-by: Scott Wood Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 1934b80027..4d09dcad25 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -10,207 +10,209 @@ */ / { - model = "MPC8272ADS"; - compatible = "MPC8260ADS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8272@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - 32-bit; - }; - }; - - pci_pic: interrupt-controller@f8200000 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = ; - built-in; - device_type = "pci-pic"; - }; - memory { - device_type = "memory"; - reg = <00000000 4000000 f4500000 00000020>; - }; - - chosen { - name = "chosen"; - linux,platform = <0>; + model = "MPC8272ADS"; + compatible = "MPC8260ADS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + }; + }; + + pci_pic: interrupt-controller@f8200000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = ; + built-in; + device_type = "pci-pic"; + }; + + memory { + device_type = "memory"; + reg = <00000000 4000000 f4500000 00000020>; + }; + + chosen { + name = "chosen"; + linux,platform = <0>; interrupt-controller = <&Cpm_pic>; - }; - - soc8272@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <00000000 f0000000 00053000>; - reg = ; - - mdio@0 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <0 0>; - #address-cells = <1>; - #size-cells = <0>; + }; + + soc8272@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <00000000 f0000000 00053000>; + reg = ; + + mdio@0 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = <0 0>; + #address-cells = <1>; + #size-cells = <0>; + phy0:ethernet-phy@0 { interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - reg = <0>; - bitbang = [ 12 12 13 02 02 01 ]; - device_type = "ethernet-phy"; - }; + interrupts = <17 4>; + reg = <0>; + bitbang = [ 12 12 13 02 02 01 ]; + device_type = "ethernet-phy"; + }; + phy1:ethernet-phy@1 { interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - bitbang = [ 12 12 13 02 02 01 ]; - reg = <3>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - device-id = <1>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11300 20 8400 100 11380 30>; - mac-address = [ 00 11 2F 99 43 54 ]; - interrupts = <20 2>; + interrupts = <17 4>; + bitbang = [ 12 12 13 02 02 01 ]; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + device-id = <1>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11300 20 8400 100 11380 30>; + mac-address = [ 00 11 2F 99 43 54 ]; + interrupts = <20 2>; interrupt-parent = <&Cpm_pic>; phy-handle = <&Phy0>; - rx-clock = <13>; - tx-clock = <12>; - }; - - ethernet@25000 { - device_type = "network"; - device-id = <2>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11320 20 8500 100 113b0 30>; - mac-address = [ 00 11 2F 99 44 54 ]; - interrupts = <21 2>; + rx-clock = <13>; + tx-clock = <12>; + }; + + ethernet@25000 { + device_type = "network"; + device-id = <2>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11320 20 8500 100 113b0 30>; + mac-address = [ 00 11 2F 99 44 54 ]; + interrupts = <21 2>; interrupt-parent = <&Cpm_pic>; phy-handle = <&Phy1>; - rx-clock = <17>; - tx-clock = <18>; - }; - - cpm@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <00000000 00000000 20000>; - reg = <0 20000>; - command-proc = <119c0>; - brg-frequency = <17D7840>; - cpm_clk = ; - - scc@11a00 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; - reg = <11a00 20 8000 100>; - current-speed = <1c200>; - interrupts = <28 2>; + rx-clock = <17>; + tx-clock = <18>; + }; + + cpm@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <00000000 00000000 20000>; + reg = <0 20000>; + command-proc = <119c0>; + brg-frequency = <17D7840>; + cpm_clk = ; + + scc@11a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <1>; + reg = <11a00 20 8000 100>; + current-speed = <1c200>; + interrupts = <28 2>; interrupt-parent = <&Cpm_pic>; - clock-setup = <0 00ffffff>; - rx-clock = <1>; - tx-clock = <1>; - }; - - scc@11a60 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <4>; - reg = <11a60 20 8300 100>; - current-speed = <1c200>; - interrupts = <2b 2>; + clock-setup = <0 00ffffff>; + rx-clock = <1>; + tx-clock = <1>; + }; + + scc@11a60 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <4>; + reg = <11a60 20 8300 100>; + current-speed = <1c200>; + interrupts = <2b 2>; interrupt-parent = <&Cpm_pic>; - clock-setup = <1b ffffff00>; - rx-clock = <4>; - tx-clock = <4>; - }; - - }; - cpm_pic:interrupt-controller@10c00 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM2"; - }; - pci@0500 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "8272"; - device_type = "pci"; - reg = <10430 4dc>; - clock-frequency = <3f940aa>; - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 8 - b000 0 0 2 f8200000 41 8 - b000 0 0 3 f8200000 42 8 - b000 0 0 4 f8200000 43 8 - - /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 8 - b800 0 0 2 f8200000 40 8 - b800 0 0 3 f8200000 41 8 - b800 0 0 4 f8200000 42 8 - - /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 8 - c000 0 0 2 f8200000 43 8 - c000 0 0 3 f8200000 40 8 - c000 0 0 4 f8200000 41 8>; + clock-setup = <1b ffffff00>; + rx-clock = <4>; + tx-clock = <4>; + }; + }; + + cpm_pic:interrupt-controller@10c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM2"; + }; + + pci@0500 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "8272"; + device_type = "pci"; + reg = <10430 4dc>; + clock-frequency = <3f940aa>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 f8200000 40 8 + b000 0 0 2 f8200000 41 8 + b000 0 0 3 f8200000 42 8 + b000 0 0 4 f8200000 43 8 + + /* IDSEL 0x17 */ + b800 0 0 1 f8200000 43 8 + b800 0 0 2 f8200000 40 8 + b800 0 0 3 f8200000 41 8 + b800 0 0 4 f8200000 42 8 + + /* IDSEL 0x18 */ + c000 0 0 1 f8200000 42 8 + c000 0 0 2 f8200000 43 8 + c000 0 0 3 f8200000 40 8 + c000 0 0 4 f8200000 41 8>; interrupt-parent = <&Cpm_pic>; - interrupts = <14 8>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 40000000 - 01000000 0 00000000 f6000000 0 02000000>; - }; + interrupts = <14 8>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 40000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = ; + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; interrupt-parent = <&Cpm_pic>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; - }; - - }; + descriptor-types-mask = <01010ebf>; + }; + }; }; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 24bea97c73..dfad0e469e 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -272,7 +272,7 @@ void do_IRQ(struct pt_regs *regs) struct thread_info *curtp, *irqtp; #endif - irq_enter(); + irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 2KB free? */ @@ -321,7 +321,7 @@ void do_IRQ(struct pt_regs *regs) /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; - irq_exit(); + irq_exit(); set_irq_regs(old_regs); #ifdef CONFIG_PPC_ISERIES diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index f1693550c7..601b389b57 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -89,24 +89,24 @@ init_internal_rtc(void) static int __init get_freq(char *name, unsigned long *val) { - struct device_node *cpu; - const unsigned int *fp; - int found = 0; + struct device_node *cpu; + const unsigned int *fp; + int found = 0; - /* The cpu node should have timebase and clock frequency properties */ - cpu = of_find_node_by_type(NULL, "cpu"); + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu) { - fp = of_get_property(cpu, name, NULL); - if (fp) { - found = 1; - *val = *fp; - } + if (cpu) { + fp = of_get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp; + } - of_node_put(cpu); - } + of_node_put(cpu); + } - return found; + return found; } /* The decrementer counts at the system (internal) clock frequency divided by @@ -122,7 +122,7 @@ void __init mpc8xx_calibrate_decr(void) sit8xx_t *sys_tmr2; int irq, virq; - clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); + clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); /* Unlock the SCCR. */ out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); @@ -130,24 +130,24 @@ void __init mpc8xx_calibrate_decr(void) immr_unmap(clk_r1); /* Force all 8xx processors to use divide by 16 processor clock. */ - clk_r2 = (car8xx_t *) immr_map(im_clkrst); + clk_r2 = (car8xx_t *) immr_map(im_clkrst); setbits32(&clk_r2->car_sccr, 0x02000000); immr_unmap(clk_r2); /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; - ppc_proc_freq = 50000000; - if (!get_freq("clock-frequency", &ppc_proc_freq)) - printk(KERN_ERR "WARNING: Estimating processor frequency" - "(not found)\n"); - - printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + ppc_tb_freq = 50000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 16; + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); + + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used * to be done elsewhere, but other changes caused it to get @@ -164,7 +164,7 @@ void __init mpc8xx_calibrate_decr(void) * we guarantee the registers are locked, then we unlock them * for our use. */ - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); @@ -180,8 +180,8 @@ void __init mpc8xx_calibrate_decr(void) * we have to enable the timebase). The decrementer interrupt * is wired into the vector table, nothing to do here for that. */ - cpu = of_find_node_by_type(NULL, "cpu"); - virq= irq_of_parse_and_map(cpu, 0); + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); irq = irq_map[virq].hwirq; sys_tmr2 = (sit8xx_t *) immr_map(im_sit); @@ -211,10 +211,10 @@ int mpc8xx_set_rtc_time(struct rtc_time *tm) sit8xx_t *sys_tmr2; int time; - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); sys_tmr2 = (sit8xx_t *) immr_map(im_sit); time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); + tm->tm_hour, tm->tm_min, tm->tm_sec); out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); out_be32(&sys_tmr2->sit_rtc, time); @@ -233,8 +233,8 @@ void mpc8xx_get_rtc_time(struct rtc_time *tm) /* Get time from the RTC. */ data = in_be32(&sys_tmr->sit_rtc); to_tm(data, tm); - tm->tm_year -= 1900; - tm->tm_mon -= 1; + tm->tm_year -= 1900; + tm->tm_mon -= 1; immr_unmap(sys_tmr); return; } @@ -298,7 +298,7 @@ void __init m8xx_pic_init(void) int irq; if (mpc8xx_pic_init()) { - printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); return; } diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index 4f67b89ba1..e8e79f83d1 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -45,10 +45,10 @@ #define CPM_MAP_SIZE (0x4000) static void m8xx_cpm_dpinit(void); -static uint host_buffer; /* One page of host buffer */ -static uint host_end; /* end + 1 */ -cpm8xx_t *cpmp; /* Pointer to comm processor space */ -cpic8xx_t *cpic_reg; +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t *cpmp; /* Pointer to comm processor space */ +cpic8xx_t *cpic_reg; static struct device_node *cpm_pic_node; static struct irq_host *cpm_pic_host; @@ -115,7 +115,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, * and return. This is a no-op function so we don't need any special * tests in the interrupt handler. */ -static irqreturn_t cpm_error_interrupt(int irq, void *dev) +static irqreturn_t cpm_error_interrupt(int irq, void *dev) { return IRQ_HANDLED; } @@ -181,7 +181,7 @@ unsigned int cpm_pic_init(void) printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); goto end; } - eirq= irq_of_parse_and_map(np, 0); + eirq = irq_of_parse_and_map(np, 0); if (eirq == NO_IRQ) goto end; @@ -197,15 +197,15 @@ end: void cpm_reset(void) { - cpm8xx_t *commproc; - sysconf8xx_t *siu_conf; + cpm8xx_t *commproc; + sysconf8xx_t *siu_conf; commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); #ifdef CONFIG_UCODE_PATCH /* Perform a reset. */ - out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); /* Wait for it. */ @@ -307,7 +307,7 @@ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; #define CPM_DPMEM_ALIGNMENT 8 -static u8* dpram_vbase; +static u8 *dpram_vbase; static uint dpram_pbase; void m8xx_cpm_dpinit(void) diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index 9244129747..dbe8d18021 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -201,7 +201,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) } if (mode == CPM_CLK_RX) - shift +=3; + shift += 3; for (i=0; i<24; i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) {