From: Alex Villacís Lasso Date: Tue, 28 Aug 2007 22:57:50 +0000 (-0700) Subject: [IrDA]: Kingsun Dazzle IrDA USB driver X-Git-Tag: v2.6.24-rc1~1454^2~748 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=4a1d7c25cb438f96b700ac26dc5aa0a38a6d86ea;p=linux-2.6 [IrDA]: Kingsun Dazzle IrDA USB driver This dongle does not follow the usb-irda specification, so it needs its own special driver. Just like the Kingsun/Donshine dongle, it exposes two interrupt endpoints. Reception is performed through direct reads from the input endpoint. Transmission requires splitting the IrDA frames into 8-byte segments, in which the first byte encodes how many of the remaining 7 bytes are used as data. Speed change is made with a control URB just like the one in cypress_m8, and it seems to support up to 115200 bps. On plugin, this dongle reports vendor and device IDs: 0x07d0:0x4100 Signed-off-by: Alex Villacís Lasso Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 2098d0af8f..cfa7b8835d 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -162,7 +162,19 @@ config EP7211_DONGLE Say Y here if you want to build support for the Cirrus logic EP7211 chipset's infrared module. +config KSDAZZLE_DONGLE + tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)" + depends on IRDA && USB && EXPERIMENTAL + help + Say Y or M here if you want to build support for the KingSun Dazzle + IrDA-USB bridge device driver. + + This USB bridge does not conform to the IrDA-USB device class + specification, and therefore needs its own specific driver. This + dongle supports SIR speeds only (9600 through 115200 bps). + To compile it as a module, choose M here: the module will be called + ksdazzle-sir. comment "Old SIR device drivers" diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index 2808ef5c7b..e19da3b919 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o obj-$(CONFIG_EP7211_DONGLE) += ep7211-sir.o obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o +obj-$(CONFIG_KSDAZZLE_DONGLE) += ksdazzle-sir.o # The SIR helper module sir-dev-objs := sir_dev.o sir_dongle.o diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c new file mode 100644 index 0000000000..12b0e7a15b --- /dev/null +++ b/drivers/net/irda/ksdazzle-sir.c @@ -0,0 +1,823 @@ +/***************************************************************************** +* +* Filename: ksdazzle.c +* Version: 0.1.1 +* Description: Irda KingSun Dazzle USB Dongle +* Status: Experimental +* Author: Alex Villacís Lasso +* +* Based on stir4200, mcs7780, kingsun-sir drivers. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +* +*****************************************************************************/ + +/* + * Following is my most current (2007-07-26) understanding of how the Kingsun + * 07D0:4100 dongle (sometimes known as the MA-660) is supposed to work. This + * information was deduced by examining the USB traffic captured with USBSnoopy + * from the WinXP driver. Feel free to update here as more of the dongle is + * known. + * + * General: This dongle exposes one interface with two interrupt endpoints, one + * IN and one OUT. In this regard, it is similar to what the Kingsun/Donshine + * dongle (07c0:4200) exposes. Traffic is raw and needs to be wrapped and + * unwrapped manually as in stir4200, kingsun-sir, and ks959-sir. + * + * Transmission: To transmit an IrDA frame, it is necessary to wrap it, then + * split it into multiple segments of up to 7 bytes each, and transmit each in + * sequence. It seems that sending a single big block (like kingsun-sir does) + * won't work with this dongle. Each segment needs to be prefixed with a value + * equal to (unsigned char)0xF8 + , inside a payload + * of exactly 8 bytes. For example, a segment of 1 byte gets prefixed by 0xF9, + * and one of 7 bytes gets prefixed by 0xFF. The bytes at the end of the + * payload, not considered by the prefix, are ignored (set to 0 by this + * implementation). + * + * Reception: To receive data, the driver must poll the dongle regularly (like + * kingsun-sir.c) with interrupt URBs. If data is available, it will be returned + * in payloads from 0 to 8 bytes long. When concatenated, these payloads form + * a raw IrDA stream that needs to be unwrapped as in stir4200 and kingsun-sir + * + * Speed change: To change the speed of the dongle, the driver prepares a + * control URB with the following as a setup packet: + * bRequestType USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE + * bRequest 0x09 + * wValue 0x0200 + * wIndex 0x0001 + * wLength 0x0008 (length of the payload) + * The payload is a 8-byte record, apparently identical to the one used in + * drivers/usb/serial/cypress_m8.c to change speed: + * __u32 baudSpeed; + * unsigned int dataBits : 2; // 0 - 5 bits 3 - 8 bits + * unsigned int : 1; + * unsigned int stopBits : 1; + * unsigned int parityEnable : 1; + * unsigned int parityType : 1; + * unsigned int : 1; + * unsigned int reset : 1; + * unsigned char reserved[3]; // set to 0 + * + * For now only SIR speeds have been observed with this dongle. Therefore, + * nothing is known on what changes (if any) must be done to frame wrapping / + * unwrapping for higher than SIR speeds. This driver assumes no change is + * necessary and announces support for all the way to 115200 bps. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#define KSDAZZLE_VENDOR_ID 0x07d0 +#define KSDAZZLE_PRODUCT_ID 0x4100 + +/* These are the currently known USB ids */ +static struct usb_device_id dongles[] = { + /* KingSun Co,Ltd IrDA/USB Bridge */ + {USB_DEVICE(KSDAZZLE_VENDOR_ID, KSDAZZLE_PRODUCT_ID)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, dongles); + +#define KINGSUN_MTT 0x07 +#define KINGSUN_REQ_RECV 0x01 +#define KINGSUN_REQ_SEND 0x09 + +#define KINGSUN_SND_FIFO_SIZE 2048 /* Max packet we can send */ + +struct ksdazzle_speedparams { + __le32 baudrate; /* baud rate, little endian */ + __u8 flags; + __u8 reserved[3]; +} __attribute__ ((packed)); + +#define KS_DATA_5_BITS 0x00 +#define KS_DATA_6_BITS 0x01 +#define KS_DATA_7_BITS 0x02 +#define KS_DATA_8_BITS 0x03 + +#define KS_STOP_BITS_1 0x00 +#define KS_STOP_BITS_2 0x08 + +#define KS_PAR_DISABLE 0x00 +#define KS_PAR_EVEN 0x10 +#define KS_PAR_ODD 0x30 +#define KS_RESET 0x80 + +#define KINGSUN_EP_IN 0 +#define KINGSUN_EP_OUT 1 + +struct ksdazzle_cb { + struct usb_device *usbdev; /* init: probe_irda */ + struct net_device *netdev; /* network layer */ + struct irlap_cb *irlap; /* The link layer we are binded to */ + struct net_device_stats stats; /* network statistics */ + struct qos_info qos; + + struct urb *tx_urb; + __u8 *tx_buf_clear; + unsigned int tx_buf_clear_used; + unsigned int tx_buf_clear_sent; + __u8 tx_payload[8]; + + struct urb *rx_urb; + __u8 rx_payload[8]; + iobuff_t rx_unwrap_buff; + + struct usb_ctrlrequest *speed_setuprequest; + struct urb *speed_urb; + struct ksdazzle_speedparams speedparams; + unsigned int new_speed; + + __u8 ep_in; + __u8 ep_out; + + spinlock_t lock; + int receiving; +}; + +/* Callback transmission routine */ +static void ksdazzle_speed_irq(struct urb *urb) +{ + /* unlink, shutdown, unplug, other nasties */ + if (urb->status != 0) { + err("ksdazzle_speed_irq: urb asynchronously failed - %d", + urb->status); + } +} + +/* Send a control request to change speed of the dongle */ +static int ksdazzle_change_speed(struct ksdazzle_cb *kingsun, unsigned speed) +{ + static unsigned int supported_speeds[] = { 2400, 9600, 19200, 38400, + 57600, 115200, 576000, 1152000, 4000000, 0 + }; + int err; + unsigned int i; + + if (kingsun->speed_setuprequest == NULL || kingsun->speed_urb == NULL) + return -ENOMEM; + + /* Check that requested speed is among the supported ones */ + for (i = 0; supported_speeds[i] && supported_speeds[i] != speed; i++) ; + if (supported_speeds[i] == 0) + return -EOPNOTSUPP; + + memset(&(kingsun->speedparams), 0, sizeof(struct ksdazzle_speedparams)); + kingsun->speedparams.baudrate = cpu_to_le32(speed); + kingsun->speedparams.flags = KS_DATA_8_BITS; + + /* speed_setuprequest pre-filled in ksdazzle_probe */ + usb_fill_control_urb(kingsun->speed_urb, kingsun->usbdev, + usb_sndctrlpipe(kingsun->usbdev, 0), + (unsigned char *)kingsun->speed_setuprequest, + &(kingsun->speedparams), + sizeof(struct ksdazzle_speedparams), + ksdazzle_speed_irq, kingsun); + kingsun->speed_urb->status = 0; + err = usb_submit_urb(kingsun->speed_urb, GFP_ATOMIC); + + return err; +} + +/* Submit one fragment of an IrDA frame to the dongle */ +static void ksdazzle_send_irq(struct urb *urb); +static int ksdazzle_submit_tx_fragment(struct ksdazzle_cb *kingsun) +{ + unsigned int wraplen; + int ret; + + /* We can send at most 7 bytes of payload at a time */ + wraplen = 7; + if (wraplen > kingsun->tx_buf_clear_used) + wraplen = kingsun->tx_buf_clear_used; + + /* Prepare payload prefix with used length */ + memset(kingsun->tx_payload, 0, 8); + kingsun->tx_payload[0] = (unsigned char)0xf8 + wraplen; + memcpy(kingsun->tx_payload + 1, kingsun->tx_buf_clear, wraplen); + + usb_fill_int_urb(kingsun->tx_urb, kingsun->usbdev, + usb_sndintpipe(kingsun->usbdev, kingsun->ep_out), + kingsun->tx_payload, 8, ksdazzle_send_irq, kingsun, 1); + kingsun->tx_urb->status = 0; + ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC); + + /* Remember how much data was sent, in order to update at callback */ + kingsun->tx_buf_clear_sent = (ret == 0) ? wraplen : 0; + return ret; +} + +/* Callback transmission routine */ +static void ksdazzle_send_irq(struct urb *urb) +{ + struct ksdazzle_cb *kingsun = urb->context; + struct net_device *netdev = kingsun->netdev; + int ret = 0; + + /* in process of stopping, just drop data */ + if (!netif_running(kingsun->netdev)) { + err("ksdazzle_send_irq: Network not running!"); + return; + } + + /* unlink, shutdown, unplug, other nasties */ + if (urb->status != 0) { + err("ksdazzle_send_irq: urb asynchronously failed - %d", + urb->status); + return; + } + + if (kingsun->tx_buf_clear_used > 0) { + /* Update data remaining to be sent */ + if (kingsun->tx_buf_clear_sent < kingsun->tx_buf_clear_used) { + memmove(kingsun->tx_buf_clear, + kingsun->tx_buf_clear + + kingsun->tx_buf_clear_sent, + kingsun->tx_buf_clear_used - + kingsun->tx_buf_clear_sent); + } + kingsun->tx_buf_clear_used -= kingsun->tx_buf_clear_sent; + kingsun->tx_buf_clear_sent = 0; + + if (kingsun->tx_buf_clear_used > 0) { + /* There is more data to be sent */ + if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) { + err("ksdazzle_send_irq: failed tx_urb submit: %d", ret); + switch (ret) { + case -ENODEV: + case -EPIPE: + break; + default: + kingsun->stats.tx_errors++; + netif_start_queue(netdev); + } + } + } else { + /* All data sent, send next speed && wake network queue */ + if (kingsun->new_speed != -1 && + cpu_to_le32(kingsun->new_speed) != + kingsun->speedparams.baudrate) + ksdazzle_change_speed(kingsun, + kingsun->new_speed); + + netif_wake_queue(netdev); + } + } +} + +/* + * Called from net/core when new frame is available. + */ +static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct ksdazzle_cb *kingsun; + unsigned int wraplen; + int ret = 0; + + if (skb == NULL || netdev == NULL) + return -EINVAL; + + netif_stop_queue(netdev); + + /* the IRDA wrapping routines don't deal with non linear skb */ + SKB_LINEAR_ASSERT(skb); + + kingsun = netdev_priv(netdev); + + spin_lock(&kingsun->lock); + kingsun->new_speed = irda_get_next_speed(skb); + + /* Append data to the end of whatever data remains to be transmitted */ + wraplen = + async_wrap_skb(skb, kingsun->tx_buf_clear, KINGSUN_SND_FIFO_SIZE); + kingsun->tx_buf_clear_used = wraplen; + + if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) { + err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret); + switch (ret) { + case -ENODEV: + case -EPIPE: + break; + default: + kingsun->stats.tx_errors++; + netif_start_queue(netdev); + } + } else { + kingsun->stats.tx_packets++; + kingsun->stats.tx_bytes += skb->len; + + } + + dev_kfree_skb(skb); + spin_unlock(&kingsun->lock); + + return ret; +} + +/* Receive callback function */ +static void ksdazzle_rcv_irq(struct urb *urb) +{ + struct ksdazzle_cb *kingsun = urb->context; + + /* in process of stopping, just drop data */ + if (!netif_running(kingsun->netdev)) { + kingsun->receiving = 0; + return; + } + + /* unlink, shutdown, unplug, other nasties */ + if (urb->status != 0) { + err("ksdazzle_rcv_irq: urb asynchronously failed - %d", + urb->status); + kingsun->receiving = 0; + return; + } + + if (urb->actual_length > 0) { + __u8 *bytes = urb->transfer_buffer; + unsigned int i; + + for (i = 0; i < urb->actual_length; i++) { + async_unwrap_char(kingsun->netdev, &kingsun->stats, + &kingsun->rx_unwrap_buff, bytes[i]); + } + kingsun->netdev->last_rx = jiffies; + kingsun->receiving = + (kingsun->rx_unwrap_buff.state != OUTSIDE_FRAME) ? 1 : 0; + } + + /* This urb has already been filled in ksdazzle_net_open. It is assumed that + urb keeps the pointer to the payload buffer. + */ + urb->status = 0; + usb_submit_urb(urb, GFP_ATOMIC); +} + +/* + * Function ksdazzle_net_open (dev) + * + * Network device is taken up. Usually this is done by "ifconfig irda0 up" + */ +static int ksdazzle_net_open(struct net_device *netdev) +{ + struct ksdazzle_cb *kingsun = netdev_priv(netdev); + int err = -ENOMEM; + char hwname[16]; + + /* At this point, urbs are NULL, and skb is NULL (see ksdazzle_probe) */ + kingsun->receiving = 0; + + /* Initialize for SIR to copy data directly into skb. */ + kingsun->rx_unwrap_buff.in_frame = FALSE; + kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME; + kingsun->rx_unwrap_buff.truesize = IRDA_SKB_MAX_MTU; + kingsun->rx_unwrap_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU); + if (!kingsun->rx_unwrap_buff.skb) + goto free_mem; + + skb_reserve(kingsun->rx_unwrap_buff.skb, 1); + kingsun->rx_unwrap_buff.head = kingsun->rx_unwrap_buff.skb->data; + + kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!kingsun->rx_urb) + goto free_mem; + + kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!kingsun->tx_urb) + goto free_mem; + + kingsun->speed_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!kingsun->speed_urb) + goto free_mem; + + /* Initialize speed for dongle */ + kingsun->new_speed = 9600; + err = ksdazzle_change_speed(kingsun, 9600); + if (err < 0) + goto free_mem; + + /* + * Now that everything should be initialized properly, + * Open new IrLAP layer instance to take care of us... + */ + sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); + kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); + if (!kingsun->irlap) { + err("ksdazzle-sir: irlap_open failed"); + goto free_mem; + } + + /* Start reception. */ + usb_fill_int_urb(kingsun->rx_urb, kingsun->usbdev, + usb_rcvintpipe(kingsun->usbdev, kingsun->ep_in), + kingsun->rx_payload, 8, ksdazzle_rcv_irq, kingsun, 1); + kingsun->rx_urb->status = 0; + err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); + if (err) { + err("ksdazzle-sir: first urb-submit failed: %d", err); + goto close_irlap; + } + + netif_start_queue(netdev); + + /* Situation at this point: + - all work buffers allocated + - urbs allocated and ready to fill + - max rx packet known (in max_rx) + - unwrap state machine initialized, in state outside of any frame + - receive request in progress + - IrLAP layer started, about to hand over packets to send + */ + + return 0; + + close_irlap: + irlap_close(kingsun->irlap); + free_mem: + usb_free_urb(kingsun->speed_urb); + kingsun->speed_urb = NULL; + usb_free_urb(kingsun->tx_urb); + kingsun->tx_urb = NULL; + usb_free_urb(kingsun->rx_urb); + kingsun->rx_urb = NULL; + if (kingsun->rx_unwrap_buff.skb) { + kfree_skb(kingsun->rx_unwrap_buff.skb); + kingsun->rx_unwrap_buff.skb = NULL; + kingsun->rx_unwrap_buff.head = NULL; + } + return err; +} + +/* + * Function ksdazzle_net_close (dev) + * + * Network device is taken down. Usually this is done by + * "ifconfig irda0 down" + */ +static int ksdazzle_net_close(struct net_device *netdev) +{ + struct ksdazzle_cb *kingsun = netdev_priv(netdev); + + /* Stop transmit processing */ + netif_stop_queue(netdev); + + /* Mop up receive && transmit urb's */ + usb_kill_urb(kingsun->tx_urb); + usb_free_urb(kingsun->tx_urb); + kingsun->tx_urb = NULL; + + usb_kill_urb(kingsun->speed_urb); + usb_free_urb(kingsun->speed_urb); + kingsun->speed_urb = NULL; + + usb_kill_urb(kingsun->rx_urb); + usb_free_urb(kingsun->rx_urb); + kingsun->rx_urb = NULL; + + kfree_skb(kingsun->rx_unwrap_buff.skb); + kingsun->rx_unwrap_buff.skb = NULL; + kingsun->rx_unwrap_buff.head = NULL; + kingsun->rx_unwrap_buff.in_frame = FALSE; + kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME; + kingsun->receiving = 0; + + /* Stop and remove instance of IrLAP */ + irlap_close(kingsun->irlap); + + kingsun->irlap = NULL; + + return 0; +} + +/* + * IOCTLs : Extra out-of-band network commands... + */ +static int ksdazzle_net_ioctl(struct net_device *netdev, struct ifreq *rq, + int cmd) +{ + struct if_irda_req *irq = (struct if_irda_req *)rq; + struct ksdazzle_cb *kingsun = netdev_priv(netdev); + int ret = 0; + + switch (cmd) { + case SIOCSBANDWIDTH: /* Set bandwidth */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + /* Check if the device is still there */ + if (netif_device_present(kingsun->netdev)) + return ksdazzle_change_speed(kingsun, + irq->ifr_baudrate); + break; + + case SIOCSMEDIABUSY: /* Set media busy */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + /* Check if the IrDA stack is still there */ + if (netif_running(kingsun->netdev)) + irda_device_set_media_busy(kingsun->netdev, TRUE); + break; + + case SIOCGRECEIVING: + /* Only approximately true */ + irq->ifr_receiving = kingsun->receiving; + break; + + default: + ret = -EOPNOTSUPP; + } + + return ret; +} + +/* + * Get device stats (for /proc/net/dev and ifconfig) + */ +static struct net_device_stats *ksdazzle_net_get_stats(struct net_device + *netdev) +{ + struct ksdazzle_cb *kingsun = netdev_priv(netdev); + return &kingsun->stats; +} + +/* + * This routine is called by the USB subsystem for each new device + * in the system. We need to check if the device is ours, and in + * this case start handling it. + */ +static int ksdazzle_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + + struct usb_device *dev = interface_to_usbdev(intf); + struct ksdazzle_cb *kingsun = NULL; + struct net_device *net = NULL; + int ret = -ENOMEM; + int pipe, maxp_in, maxp_out; + __u8 ep_in; + __u8 ep_out; + + /* Check that there really are two interrupt endpoints. Check based on the + one in drivers/usb/input/usbmouse.c + */ + interface = intf->cur_altsetting; + if (interface->desc.bNumEndpoints != 2) { + err("ksdazzle: expected 2 endpoints, found %d", + interface->desc.bNumEndpoints); + return -ENODEV; + } + endpoint = &interface->endpoint[KINGSUN_EP_IN].desc; + if (!usb_endpoint_is_int_in(endpoint)) { + err("ksdazzle: endpoint 0 is not interrupt IN"); + return -ENODEV; + } + + ep_in = endpoint->bEndpointAddress; + pipe = usb_rcvintpipe(dev, ep_in); + maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + if (maxp_in > 255 || maxp_in <= 1) { + err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in); + return -ENODEV; + } + + endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc; + if (!usb_endpoint_is_int_out(endpoint)) { + err("ksdazzle: endpoint 1 is not interrupt OUT"); + return -ENODEV; + } + + ep_out = endpoint->bEndpointAddress; + pipe = usb_sndintpipe(dev, ep_out); + maxp_out = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + /* Allocate network device container. */ + net = alloc_irdadev(sizeof(*kingsun)); + if (!net) + goto err_out1; + + SET_MODULE_OWNER(net); + SET_NETDEV_DEV(net, &intf->dev); + kingsun = netdev_priv(net); + kingsun->netdev = net; + kingsun->usbdev = dev; + kingsun->ep_in = ep_in; + kingsun->ep_out = ep_out; + kingsun->irlap = NULL; + kingsun->tx_urb = NULL; + kingsun->tx_buf_clear = NULL; + kingsun->tx_buf_clear_used = 0; + kingsun->tx_buf_clear_sent = 0; + + kingsun->rx_urb = NULL; + kingsun->rx_unwrap_buff.in_frame = FALSE; + kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME; + kingsun->rx_unwrap_buff.skb = NULL; + kingsun->receiving = 0; + spin_lock_init(&kingsun->lock); + + kingsun->speed_setuprequest = NULL; + kingsun->speed_urb = NULL; + kingsun->speedparams.baudrate = 0; + + /* Allocate output buffer */ + kingsun->tx_buf_clear = kmalloc(KINGSUN_SND_FIFO_SIZE, GFP_KERNEL); + if (!kingsun->tx_buf_clear) + goto free_mem; + + /* Allocate and initialize speed setup packet */ + kingsun->speed_setuprequest = + kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!kingsun->speed_setuprequest) + goto free_mem; + kingsun->speed_setuprequest->bRequestType = + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + kingsun->speed_setuprequest->bRequest = KINGSUN_REQ_SEND; + kingsun->speed_setuprequest->wValue = cpu_to_le16(0x0200); + kingsun->speed_setuprequest->wIndex = cpu_to_le16(0x0001); + kingsun->speed_setuprequest->wLength = + cpu_to_le16(sizeof(struct ksdazzle_speedparams)); + + printk(KERN_INFO "KingSun/Dazzle IRDA/USB found at address %d, " + "Vendor: %x, Product: %x\n", + dev->devnum, le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + /* Initialize QoS for this device */ + irda_init_max_qos_capabilies(&kingsun->qos); + + /* Baud rates known to be supported. Please uncomment if devices (other + than a SonyEriccson K300 phone) can be shown to support higher speeds + with this dongle. + */ + kingsun->qos.baud_rate.bits = + IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200; + kingsun->qos.min_turn_time.bits &= KINGSUN_MTT; + irda_qos_bits_to_value(&kingsun->qos); + + /* Override the network functions we need to use */ + net->hard_start_xmit = ksdazzle_hard_xmit; + net->open = ksdazzle_net_open; + net->stop = ksdazzle_net_close; + net->get_stats = ksdazzle_net_get_stats; + net->do_ioctl = ksdazzle_net_ioctl; + + ret = register_netdev(net); + if (ret != 0) + goto free_mem; + + info("IrDA: Registered KingSun/Dazzle device %s", net->name); + + usb_set_intfdata(intf, kingsun); + + /* Situation at this point: + - all work buffers allocated + - setup requests pre-filled + - urbs not allocated, set to NULL + - max rx packet known (is KINGSUN_FIFO_SIZE) + - unwrap state machine (partially) initialized, but skb == NULL + */ + + return 0; + + free_mem: + kfree(kingsun->speed_setuprequest); + kfree(kingsun->tx_buf_clear); + free_netdev(net); + err_out1: + return ret; +} + +/* + * The current device is removed, the USB layer tell us to shut it down... + */ +static void ksdazzle_disconnect(struct usb_interface *intf) +{ + struct ksdazzle_cb *kingsun = usb_get_intfdata(intf); + + if (!kingsun) + return; + + unregister_netdev(kingsun->netdev); + + /* Mop up receive && transmit urb's */ + usb_kill_urb(kingsun->speed_urb); + usb_free_urb(kingsun->speed_urb); + kingsun->speed_urb = NULL; + + usb_kill_urb(kingsun->tx_urb); + usb_free_urb(kingsun->tx_urb); + kingsun->tx_urb = NULL; + + usb_kill_urb(kingsun->rx_urb); + usb_free_urb(kingsun->rx_urb); + kingsun->rx_urb = NULL; + + kfree(kingsun->speed_setuprequest); + kfree(kingsun->tx_buf_clear); + free_netdev(kingsun->netdev); + + usb_set_intfdata(intf, NULL); +} + +#ifdef CONFIG_PM +/* USB suspend, so power off the transmitter/receiver */ +static int ksdazzle_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct ksdazzle_cb *kingsun = usb_get_intfdata(intf); + + netif_device_detach(kingsun->netdev); + if (kingsun->speed_urb != NULL) + usb_kill_urb(kingsun->speed_urb); + if (kingsun->tx_urb != NULL) + usb_kill_urb(kingsun->tx_urb); + if (kingsun->rx_urb != NULL) + usb_kill_urb(kingsun->rx_urb); + return 0; +} + +/* Coming out of suspend, so reset hardware */ +static int ksdazzle_resume(struct usb_interface *intf) +{ + struct ksdazzle_cb *kingsun = usb_get_intfdata(intf); + + if (kingsun->rx_urb != NULL) { + /* Setup request already filled in ksdazzle_probe */ + usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); + } + netif_device_attach(kingsun->netdev); + + return 0; +} +#endif + +/* + * USB device callbacks + */ +static struct usb_driver irda_driver = { + .name = "ksdazzle-sir", + .probe = ksdazzle_probe, + .disconnect = ksdazzle_disconnect, + .id_table = dongles, +#ifdef CONFIG_PM + .suspend = ksdazzle_suspend, + .resume = ksdazzle_resume, +#endif +}; + +/* + * Module insertion + */ +static int __init ksdazzle_init(void) +{ + return usb_register(&irda_driver); +} + +module_init(ksdazzle_init); + +/* + * Module removal + */ +static void __exit ksdazzle_cleanup(void) +{ + /* Deregister the driver and remove all pending instances */ + usb_deregister(&irda_driver); +} + +module_exit(ksdazzle_cleanup); + +MODULE_AUTHOR("Alex Villacís Lasso "); +MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun Dazzle"); +MODULE_LICENSE("GPL");