From: Egry Gábor Date: Fri, 12 May 2006 16:35:02 +0000 (+0100) Subject: Trivial typo fixes in Kconfig files (MTD). X-Git-Tag: v2.6.18-rc1~1105^2~120 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=4992a9e88886b0c5ebc3d27eb74d0344c873eeea;p=linux-2.6 Trivial typo fixes in Kconfig files (MTD). Signed-off-by: Egry Gábor Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index f6b775e63a..5ac265dde4 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -78,7 +78,7 @@ config MTD_REDBOOT_DIRECTORY_BLOCK option. The option specifies which Flash sectors holds the RedBoot - partition table. A zero or positive value gives an absolete + partition table. A zero or positive value gives an absolute erase block number. A negative value specifies a number of sectors before the end of the device. @@ -103,7 +103,7 @@ config MTD_CMDLINE_PARTS bool "Command line partition table parsing" depends on MTD_PARTITIONS = "y" ---help--- - Allow generic configuration of the MTD paritition tables via the kernel + Allow generic configuration of the MTD partition tables via the kernel command line. Multiple flash resources are supported for hardware where different kinds of flash memory are available. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index b06ef2bdd4..4e2bd37b3d 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -109,7 +109,7 @@ config MTD_TS5500 mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL. Note that jumper 3 ("Write Enable Drive A") must be set - otherwise detection won't succeeed. + otherwise detection won't succeed. config MTD_SBC_GXX tristate "CFI Flash device mapped on Arcom SBC-GXx boards" diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 4a1db31aef..b4a7086b21 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -93,7 +93,7 @@ config MTD_NAND_S3C2410 This enables the NAND flash controller on the S3C2410 and S3C2440 SoCs - No board specfic support is done by this driver, each board + No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_S3C2410_DEBUG