From: shemminger@osdl.org Date: Mon, 28 Aug 2006 17:00:46 +0000 (-0700) Subject: [PATCH] sky2: use netdev_alloc_skb X-Git-Tag: v2.6.19-rc1~1263^2~78 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=497d7c8681dec5084b2e79193c2aaeddc789477f;p=linux-2.6 [PATCH] sky2: use netdev_alloc_skb Use netdev_alloc_skb for buffer allocation to allow for headroom. This prevents bugs in code paths that assume extra space at the front and makes sky2 behave like other drivers. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 67ebc05d9d..8d541bbc5e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -954,14 +954,16 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) /* * It appears the hardware has a bug in the FIFO logic that * cause it to hang if the FIFO gets overrun and the receive buffer - * is not aligned. ALso alloc_skb() won't align properly if slab - * debugging is enabled. + * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is + * aligned except if slab debugging is enabled. */ -static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask) +static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev, + unsigned int length, + gfp_t gfp_mask) { struct sk_buff *skb; - skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask); + skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask); if (likely(skb)) { unsigned long p = (unsigned long) skb->data; skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); @@ -997,7 +999,8 @@ static int sky2_rx_start(struct sky2_port *sky2) for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; - re->skb = sky2_alloc_skb(sky2->rx_bufsize, GFP_KERNEL); + re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize, + GFP_KERNEL); if (!re->skb) goto nomem; @@ -1829,15 +1832,16 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) * For small packets or errors, just reuse existing skb. * For larger packets, get new buffer. */ -static struct sk_buff *sky2_receive(struct sky2_port *sky2, +static struct sk_buff *sky2_receive(struct net_device *dev, u16 length, u32 status) { + struct sky2_port *sky2 = netdev_priv(dev); struct ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", - sky2->netdev->name, sky2->rx_next, status, length); + dev->name, sky2->rx_next, status, length); sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); @@ -1848,11 +1852,11 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if (length > sky2->netdev->mtu + ETH_HLEN) + if (length > dev->mtu + ETH_HLEN) goto oversize; if (length < copybreak) { - skb = alloc_skb(length + 2, GFP_ATOMIC); + skb = netdev_alloc_skb(dev, length + 2); if (!skb) goto resubmit; @@ -1867,7 +1871,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, } else { struct sk_buff *nskb; - nskb = sky2_alloc_skb(sky2->rx_bufsize, GFP_ATOMIC); + nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC); if (!nskb) goto resubmit; @@ -1897,7 +1901,7 @@ error: if (netif_msg_rx_err(sky2) && net_ratelimit()) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", - sky2->netdev->name, status, length); + dev->name, status, length); if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) sky2->net_stats.rx_length_errors++; @@ -1951,11 +1955,10 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: - skb = sky2_receive(sky2, length, status); + skb = sky2_receive(dev, length, status); if (!skb) break; - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies;