From: Bryan O'Sullivan <bos@pathscale.com>
Date: Thu, 15 Mar 2007 21:45:10 +0000 (-0700)
Subject: IB/ipath: Prevent random program use of diags interface
X-Git-Tag: v2.6.22-rc1~1126^2~20
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=490462c2686df6e35c21d1efe935e0b4a3bddb39;p=linux-2.6

IB/ipath: Prevent random program use of diags interface

To prevent random utility reads and writes of the diag interface to the
chip, we first require a handshake of reading from offset 0 and writing
to offset 0 before any other reads or writes can be done through the
diags device.   Otherwise chip errors can be triggered.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---

diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index 0f13a2182c..63e8368b0e 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -296,7 +296,7 @@ static int ipath_diag_open(struct inode *in, struct file *fp)
 	}
 
 	fp->private_data = dd;
-	ipath_diag_inuse = 1;
+	ipath_diag_inuse = -2;
 	diag_set_link = 0;
 	ret = 0;
 
@@ -461,6 +461,8 @@ static ssize_t ipath_diag_read(struct file *fp, char __user *data,
 	else if ((count % 4) || (*off % 4))
 		/* address or length is not 32-bit aligned, hence invalid */
 		ret = -EINVAL;
+	else if (ipath_diag_inuse < 1 && (*off || count != 8))
+		ret = -EINVAL;  /* prevent cat /dev/ipath_diag* */
 	else if ((count % 8) || (*off % 8))
 		/* address or length not 64-bit aligned; do 32-bit reads */
 		ret = ipath_read_umem32(dd, data, kreg_base + *off, count);
@@ -470,6 +472,8 @@ static ssize_t ipath_diag_read(struct file *fp, char __user *data,
 	if (ret >= 0) {
 		*off += count;
 		ret = count;
+		if (ipath_diag_inuse == -2)
+			ipath_diag_inuse++;
 	}
 
 	return ret;
@@ -489,6 +493,9 @@ static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
 	else if ((count % 4) || (*off % 4))
 		/* address or length is not 32-bit aligned, hence invalid */
 		ret = -EINVAL;
+	else if ((ipath_diag_inuse == -1 && (*off || count != 8)) ||
+		 ipath_diag_inuse == -2)  /* read qw off 0, write qw off 0 */
+		ret = -EINVAL;  /* before any other write allowed */
 	else if ((count % 8) || (*off % 8))
 		/* address or length not 64-bit aligned; do 32-bit writes */
 		ret = ipath_write_umem32(dd, kreg_base + *off, data, count);
@@ -498,6 +505,8 @@ static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
 	if (ret >= 0) {
 		*off += count;
 		ret = count;
+		if (ipath_diag_inuse == -1)
+			ipath_diag_inuse = 1; /* all read/write OK now */
 	}
 
 	return ret;