From: Divy Le Ray <divy@chelsio.com>
Date: Wed, 7 May 2008 02:25:56 +0000 (-0700)
Subject: cxgb3 - fix port up/down error path
X-Git-Tag: v2.6.26-rc3~65^2~9^2~19
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=48c4b6dbb7e246957e13302668acf7c77e4f8b3a;p=linux-2.6

cxgb3 - fix port up/down error path

Fix faiures path when ports are stopped and restarted
in EEH recovery.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---

diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 4fdb13f844..acebe431d0 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -71,6 +71,7 @@ enum {				/* adapter flags */
 	USING_MSIX = (1 << 2),
 	QUEUES_BOUND = (1 << 3),
 	TP_PARITY_INIT = (1 << 4),
+	NAPI_INIT = (1 << 5),
 };
 
 struct fl_pg_chunk {
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index ce949d5fae..d67fc10a6b 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -421,6 +421,13 @@ static void init_napi(struct adapter *adap)
 			netif_napi_add(qs->netdev, &qs->napi, qs->napi.poll,
 				       64);
 	}
+
+	/*
+	 * netif_napi_add() can be called only once per napi_struct because it
+	 * adds each new napi_struct to a list.  Be careful not to call it a
+	 * second time, e.g., during EEH recovery, by making a note of it.
+	 */
+	adap->flags |= NAPI_INIT;
 }
 
 /*
@@ -896,7 +903,8 @@ static int cxgb_up(struct adapter *adap)
 			goto out;
 
 		setup_rss(adap);
-		init_napi(adap);
+		if (!(adap->flags & NAPI_INIT))
+			init_napi(adap);
 		adap->flags |= FULL_INIT_DONE;
 	}
 
@@ -999,7 +1007,7 @@ static int offload_open(struct net_device *dev)
 		return 0;
 
 	if (!adap_up && (err = cxgb_up(adapter)) < 0)
-		return err;
+		goto out;
 
 	t3_tp_set_offload_mode(adapter, 1);
 	tdev->lldev = adapter->port[0];
@@ -1061,10 +1069,8 @@ static int cxgb_open(struct net_device *dev)
 	int other_ports = adapter->open_device_map & PORT_MASK;
 	int err;
 
-	if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) {
-		quiesce_rx(adapter);
+	if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
 		return err;
-	}
 
 	set_bit(pi->port_id, &adapter->open_device_map);
 	if (is_offload(adapter) && !ofld_disable) {
@@ -2431,7 +2437,7 @@ static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev,
 
 	pci_disable_device(pdev);
 
-	/* Request a slot slot reset. */
+	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
 }
 
@@ -2448,13 +2454,16 @@ static pci_ers_result_t t3_io_slot_reset(struct pci_dev *pdev)
 	if (pci_enable_device(pdev)) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
-		return PCI_ERS_RESULT_DISCONNECT;
+		goto err;
 	}
 	pci_set_master(pdev);
 
-	t3_prep_adapter(adapter, adapter->params.info, 1);
+	if (t3_prep_adapter(adapter, adapter->params.info, 1))
+		goto err;
 
 	return PCI_ERS_RESULT_RECOVERED;
+err:
+	return PCI_ERS_RESULT_DISCONNECT;
 }
 
 /**
@@ -2483,13 +2492,6 @@ static void t3_io_resume(struct pci_dev *pdev)
 			netif_device_attach(netdev);
 		}
 	}
-
-	if (is_offload(adapter)) {
-		__set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map);
-		if (offload_open(adapter->port[0]))
-			printk(KERN_WARNING
-			       "Could not bring back offload capabilities\n");
-	}
 }
 
 static struct pci_error_handlers t3_err_handler = {