From: Jeremy McNicoll Date: Fri, 7 Mar 2008 20:14:09 +0000 (-0500) Subject: [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map X-Git-Tag: v2.6.25-rc6~30^2~15 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3e0d65bf6d5b464949b749a8da7977f6b197d301;p=linux-2.6 [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map The following patch allows interrupts to occur on the sbc8548. Currently PCI and PCI-X devices get assigned an IRQ but the interrupt count never increases. This solves the problem and adds PCI support as well. Signed-off-by: Jeremy McNicoll Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 14be38ad5d..b86e65d926 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -184,11 +184,17 @@ cell-index = <0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) */ - 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>; + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; interrupts = <0x18 0x2>;