From: Matt LaPlante Date: Thu, 30 Nov 2006 04:22:59 +0000 (+0100) Subject: Fix misc Kconfig typos X-Git-Tag: v2.6.20-rc1~34^2~40^2~476^2~6 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3cb2fccc5f48a4d6269dfd00b4db570fca2a04d5;p=linux-2.6 Fix misc Kconfig typos Fix various Kconfig typos. Signed-off-by: Matt LaPlante Acked-by: Randy Dunlap Signed-off-by: Adrian Bunk --- diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 57f23b4653..e316bd9331 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI into the kernel and we can use the standard read[bwl]/write[bwl] macros. This is the preferred method due to speed but it limits the system to just 64MB of PCI memory. This can be - problamatic if using video cards and other memory-heavy devices. + problematic if using video cards and other memory-heavy devices. 2) If > 64MB of memory space is required, the IXP4xx can be configured to use indirect registers to access PCI This allows diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig index 147b01928a..6f4c6a1798 100644 --- a/arch/arm/mach-lh7a40x/Kconfig +++ b/arch/arm/mach-lh7a40x/Kconfig @@ -8,7 +8,7 @@ config MACH_KEV7A400 help Say Y here if you are using the Sharp KEV7A400 development board. This hardware is discontinued, so I'd be very - suprised if you wanted this option. + surprised if you wanted this option. config MACH_LPD7A400 bool "LPD7A400 Card Engine" diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 63965c78de..9aa26b9904 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -91,7 +91,7 @@ config SMDK2440_CPU2442 config MACH_S3C2413 bool help - Internal node for S3C2413 verison of SMDK2413, so that + Internal node for S3C2413 version of SMDK2413, so that machine_is_s3c2413() will work when MACH_SMDK2413 is selected diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c0bfb8212b..b09a19f87d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -197,7 +197,7 @@ config CPU_ARM940T select CPU_CP15_MPU help ARM940T is a member of the ARM9TDMI family of general- - purpose microprocessors with MPU and seperate 4KB + purpose microprocessors with MPU and separate 4KB instruction and 4KB data cases, each with a 4-word line length. diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 44eb1b9acc..c7ea9efd01 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES depends on ETRAX_ARCH_V10 default "95a6" help - Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a + Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a good choice for most Axis products... config ETRAX_DEF_R_BUS_CONFIG diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 734d5f3a53..e7e724bc0b 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE default "0" help This controls the initial value of the trickle charge register. - 0 = disabled (use this if you are unsure or have a non rechargable battery) + 0 = disabled (use this if you are unsure or have a non rechargeable battery) Otherwise the following values can be OR:ed together to control the charge current: 1 = 2kohm, 2 = 4kohm, 3 = 4kohm diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index a33097f953..f64624fc45 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN help Enables the DMA7 input channel for ser0 (ttyS0). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN help Enables the DMA5 input channel for ser1 (ttyS1). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want this on, unless you use the DMA channel for something else. @@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN help Enables the DMA3 input channel for ser2 (ttyS2). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN help Enables the DMA9 input channel for ser3 (ttyS3). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 6d920d4bdc..c1bc22c6d0 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -565,7 +565,7 @@ config ROMVEC depends on ROM help This is almost always the same as the base of the ROM. Since on all - 68000 type varients the vectors are at the base of the boot device + 68000 type variants the vectors are at the base of the boot device on system startup. config ROMVECSIZE @@ -574,7 +574,7 @@ config ROMVECSIZE depends on ROM help Define the size of the vector region in ROM. For most 68000 - varients this would be 0x400 bytes in size. Set to 0 if you do + variants this would be 0x400 bytes in size. Set to 0 if you do not want a vector region at the start of the ROM. config ROMSTART diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1443024b1c..22bb540b5c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -865,7 +865,7 @@ config MIPS_DISABLE_OBSOLETE_IDE bool # -# Endianess selection. Suffiently obscure so many users don't know what to +# Endianess selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a # choice statement should be more obvious to the user. # @@ -874,7 +874,7 @@ choice help Some MIPS machines can be configured for either little or big endian byte order. These modes require different kernels and a different - Linux distribution. In general there is one prefered byteorder for a + Linux distribution. In general there is one preferred byteorder for a particular system but some systems are just as commonly used in the one or the other endianess. diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0673dbedb2..116d7d3683 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -425,7 +425,7 @@ config PPC_MAPLE default n help This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to + For more information, refer to config PPC_PASEMI depends on PPC_MULTIPLATFORM && PPC64 diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 7edb6b4613..edcd5b875b 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -21,7 +21,7 @@ config MPC834x_SYS Be aware that PCI buses can only function when SYS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. + responsibility. config MPC834x_ITX bool "Freescale MPC834x ITX" @@ -30,7 +30,7 @@ config MPC834x_ITX This option enables support for the MPC 834x ITX evaluation board. Be aware that PCI initialization is the bootloader's - responsiblilty. + responsibility. config MPC8360E_PB bool "Freescale MPC8360E PB" diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 077711e631..ef018e25fb 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -724,7 +724,7 @@ config MPC834x_SYS Be aware that PCI buses can only function when SYS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. + responsibility. config EV64360 bool "Marvell-EV64360BP" diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6a461d4cae..bffc7e1769 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -217,7 +217,7 @@ config SH_SHMIN bool "SHMIN" select CPU_SUBTYPE_SH7706 help - Select SHMIN if configureing for the SHMIN board + Select SHMIN if configuring for the SHMIN board. config SH_UNKNOWN bool "BareCPU" diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 2f96610a83..92a7c8a636 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -212,8 +212,8 @@ config SPARC_LED tristate "Sun4m LED driver" help This driver toggles the front-panel LED on sun4m systems - in a user-specifyable manner. It's state can be probed - by reading /proc/led and it's blinking mode can be changed + in a user-specifiable manner. Its state can be probed + by reading /proc/led and its blinking mode can be changed via writes to /proc/led source "fs/Kconfig.binfmt" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2af12fc451..ad8b537ad4 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -994,7 +994,7 @@ config HPET help If you say Y here, you will have a miscdevice named "/dev/hpet/". Each open selects one of the timers supported by the HPET. The timers are - non-periodioc and/or periodic. + non-periodic and/or periodic. config HPET_RTC_IRQ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bf26755294..b8fde5cf47 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO decode audio/video standards. This option will autoselect all pertinent modules to each selected video module. - Unselect this only if you know exaclty what you are doing, since + Unselect this only if you know exactly what you are doing, since it may break support on some boards. In doubt, say Y. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 24747bdc3e..d132ed571f 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE default "4" config MTD_SHARP_SL - bool "ROM maped on Sharp SL Series" + bool "ROM mapped on Sharp SL Series" depends on MTD && ARCH_PXA help This enables access to the flash chip on the Sharp SL Series of PDAs. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6e863aa989..b6c70c58ae 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -32,7 +32,7 @@ config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT ---help--- - This is an intermidiate driver that allows sharing of + This is an intermediate driver that allows sharing of resources. To compile this driver as a module, choose M here: the module will be called ifb. If you want to use more than one ifb @@ -2136,7 +2136,7 @@ config SK98LIN This driver supports the original Yukon chipset. A cleaner driver is also available (skge) which seems to work better than this one. - This driver does not support the newer Yukon2 chipset. A seperate + This driver does not support the newer Yukon2 chipset. A separate driver, sky2, is provided to support Yukon2-based adapters. The following adapters are supported by this driver: diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index b79ec0d748..ecb61f876f 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -61,8 +61,8 @@ config FIXED_PHY depends on PHYLIB ---help--- Adds the driver to PHY layer to cover the boards that do not have any PHY bound, - but with the ability to manipulate with speed/link in software. The relavant MII - speed/duplex parameters could be effectively handled in user-specified fuction. + but with the ability to manipulate the speed/link in software. The relevant MII + speed/duplex parameters could be effectively handled in a user-specified function. Currently tested with mpc866ads. config FIXED_MII_10_FDX diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 5f1b9f5807..d0ba112355 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -27,7 +27,7 @@ config PCI_MULTITHREAD_PROBE smaller speedup on single processor machines. But it can also cause lots of bad things to happen. A number - of PCI drivers can not properly handle running in this way, + of PCI drivers cannot properly handle running in this way, some will just not work properly at all, while others might decide to blow up power supplies with a huge load all at once, so use this option at your own risk. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 23334c8bc4..d895a1adb4 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -16,7 +16,7 @@ config SPI controller and a chipselect. Most SPI slaves don't support dynamic device discovery; some are even write-only or read-only. - SPI is widely used by microcontollers to talk with sensors, + SPI is widely used by microcontrollers to talk with sensors, eeprom and flash memory, codecs and various other controller chips, analog to digital (and d-to-a) converters, and more. MMC and SD cards can be accessed using SPI protocol; and for diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index cf10cbc98f..cc60759083 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -153,7 +153,7 @@ config USB_U132_HCD adapter will *NOT* work with PC cards that do not contain an OHCI controller. - For those PC cards that contain multiple OHCI controllers only ther + For those PC cards that contain multiple OHCI controllers only the first one is used. The driver consists of two modules, the "ftdi-elan" module is a diff --git a/fs/Kconfig b/fs/Kconfig index 7b1511d50b..8bec76bbc0 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1145,7 +1145,7 @@ config BEFS_FS help The BeOS File System (BeFS) is the native file system of Be, Inc's BeOS. Notable features include support for arbitrary attributes - on files and directories, and database-like indeces on selected + on files and directories, and database-like indices on selected attributes. (Also note that this driver doesn't make those features available at this time). It is a 64 bit filesystem, so it supports extremely large volumes and files. diff --git a/sound/Kconfig b/sound/Kconfig index e0d791a984..95949b6806 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -64,11 +64,11 @@ source "sound/arm/Kconfig" source "sound/mips/Kconfig" -# the following will depenend on the order of config. +# the following will depend on the order of config. # here assuming USB is defined before ALSA source "sound/usb/Kconfig" -# the following will depenend on the order of config. +# the following will depend on the order of config. # here assuming PCMCIA is defined before ALSA source "sound/pcmcia/Kconfig"