From: Byron Bradley <byron.bbradley@gmail.com>
Date: Fri, 8 Feb 2008 18:20:01 +0000 (+0000)
Subject: [ARM] Orion: Use the sata_mv driver for the Kurobox SATA
X-Git-Tag: v2.6.25-rc1~1^2^3~1
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3b277c2965b0c707b76f89368ebe6e6da6605c23;p=linux-2.6

[ARM] Orion: Use the sata_mv driver for the Kurobox SATA

The Kurobox has a two port integrated SATA controller.
Use the sata_mv driver for this.

Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---

diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c
index 9bdd987edb..6817aca4aa 100644
--- a/arch/arm/mach-orion/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion/kurobox_pro-setup.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
+#include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -166,6 +167,13 @@ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
        .addr           = 0x32,
 };
 
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data kurobox_pro_sata_data = {
+	.n_ports        = 2,
+};
+
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
@@ -220,6 +228,7 @@ static void __init kurobox_pro_init(void)
 	platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
 	orion_eth_init(&kurobox_pro_eth_data);
+	orion_sata_init(&kurobox_pro_sata_data);
 }
 
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")