From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 21:17:13 +0000 (+0100) Subject: ide-cd: fix register loading order in cdrom_start_packet_command() X-Git-Tag: v2.6.25-rc1~1236^2~30 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3a6a3549afe7dfe212b6384106bec957bb393f3a;p=linux-2.6 ide-cd: fix register loading order in cdrom_start_packet_command() Load IDE_CONTROL_REG before other registers in cdrom_start_packet_command(). It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). While at it move misplaced FIXME comment in the right place. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index c7d77f0ad8..855a23c1c8 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -917,19 +917,19 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) return startstop; + /* FIXME: for Virtual DMA we must check harder */ if (info->dma) info->dma = !hwif->dma_setup(drive); /* Set up the controller registers. */ - /* FIXME: for Virtual DMA we must check harder */ + if (IDE_CONTROL_REG) + HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG); HWIF(drive)->OUTB(0, IDE_IREASON_REG); HWIF(drive)->OUTB(0, IDE_SECTOR_REG); HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG); HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG); - if (IDE_CONTROL_REG) - HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) { /* waiting for CDB interrupt, not DMA yet. */