From: Ben Dooks Date: Tue, 5 Feb 2008 00:02:13 +0000 (+0000) Subject: DM9000: Remove EEPROM initialisation code. X-Git-Tag: v2.6.25-rc2~2^2~31^2~21 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3927f1c88efc25b2972c8cbd7ed10d5f1b88b52a;p=linux-2.6 DM9000: Remove EEPROM initialisation code. Remove the old hack to program an initial EEPROM setting into the DM9000 as we now have ethtool support for reading and writing the EEPROM. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2acab02a64..3bef3b25ff 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -191,10 +191,6 @@ static void dm9000_write_eeprom(board_info_t *, int addr, u8 *dp); static void dm9000_rx(struct net_device *); static void dm9000_hash_table(struct net_device *); -//#define DM9000_PROGRAM_EEPROM -#ifdef DM9000_PROGRAM_EEPROM -static void program_eeprom(board_info_t * db); -#endif /* DM9000 network board routine ---------------------------- */ static void @@ -699,9 +695,6 @@ dm9000_probe(struct platform_device *pdev) ndev->poll_controller = &dm9000_poll_controller; #endif -#ifdef DM9000_PROGRAM_EEPROM - program_eeprom(db); -#endif db->msg_enable = NETIF_MSG_LINK; db->mii.phy_id_mask = 0x1f; db->mii.reg_num_mask = 0x1f; @@ -1112,28 +1105,6 @@ dm9000_write_eeprom(board_info_t *db, int offset, u8 *data) mutex_unlock(&db->addr_lock); } -#ifdef DM9000_PROGRAM_EEPROM -/* - * Only for development: - * Here we write static data to the eeprom in case - * we don't have valid content on a new board - */ -static void -program_eeprom(board_info_t * db) -{ - u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */ - 0x0000, /* Autoload: accept nothing */ - 0x0a46, 0x9000, /* Vendor / Product ID */ - 0x0000, /* pin control */ - 0x0000, - }; /* Wake-up mode control */ - int i; - for (i = 0; i < 8; i++) - write_srom_word(db, i, eeprom[i]); -} -#endif - - /* * Calculate the CRC valude of the Rx packet * flag = 1 : return the reverse CRC (for the received packet CRC)