From: Johannes Berg Date: Tue, 29 Jan 2008 16:07:43 +0000 (+0100) Subject: mac80211: dissolve pre-rx handlers X-Git-Tag: v2.6.26-rc1~1138^2~530^2~130 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=38f3714d66b5679aee2a4fe23b1235c3829fcce4;p=linux-2.6 mac80211: dissolve pre-rx handlers These handlers do not really return a status and the compiler can do a much better job when they're simply static functions that it can inline if appropriate. Also makes the code shorter. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index f8e734f0da..3961d4c432 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -1407,7 +1407,6 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.queues = 1; /* default */ local->mdev = mdev; - local->rx_pre_handlers = ieee80211_rx_pre_handlers; local->rx_handlers = ieee80211_rx_handlers; local->tx_handlers = ieee80211_tx_handlers; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index cfd0717c00..9d09ba8cc0 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -480,7 +480,6 @@ struct ieee80211_local { * deliver multicast frames both back to wireless * media and to the local net stack */ - ieee80211_rx_handler *rx_pre_handlers; ieee80211_rx_handler *rx_handlers; ieee80211_tx_handler *tx_handlers; @@ -816,7 +815,6 @@ void ieee80211_regdomain_init(void); void ieee80211_set_default_regdomain(struct ieee80211_hw_mode *mode); /* rx handling */ -extern ieee80211_rx_handler ieee80211_rx_pre_handlers[]; extern ieee80211_rx_handler ieee80211_rx_handlers[]; /* tx handling */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 535407d07f..3aae8e9e4e 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -249,15 +249,7 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, } -/* pre-rx handlers - * - * these don't have dev/sdata fields in the rx data - * The sta value should also not be used because it may - * be NULL even though a STA (in IBSS mode) will be added. - */ - -static ieee80211_txrx_result -ieee80211_rx_h_parse_qos(struct ieee80211_txrx_data *rx) +static void ieee80211_parse_qos(struct ieee80211_txrx_data *rx) { u8 *data = rx->skb->data; int tid; @@ -290,8 +282,40 @@ ieee80211_rx_h_parse_qos(struct ieee80211_txrx_data *rx) /* Set skb->priority to 1d tag if highest order bit of TID is not set. * For now, set skb->priority to 0 for other cases. */ rx->skb->priority = (tid > 7) ? 0 : tid; +} - return TXRX_CONTINUE; +static void ieee80211_verify_ip_alignment(struct ieee80211_txrx_data *rx) +{ +#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT + int hdrlen; + + if (!WLAN_FC_DATA_PRESENT(rx->fc)) + return; + + /* + * Drivers are required to align the payload data in a way that + * guarantees that the contained IP header is aligned to a four- + * byte boundary. In the case of regular frames, this simply means + * aligning the payload to a four-byte boundary (because either + * the IP header is directly contained, or IV/RFC1042 headers that + * have a length divisible by four are in front of it. + * + * With A-MSDU frames, however, the payload data address must + * yield two modulo four because there are 14-byte 802.3 headers + * within the A-MSDU frames that push the IP header further back + * to a multiple of four again. Thankfully, the specs were sane + * enough this time around to require padding each A-MSDU subframe + * to a length that is a multiple of four. + * + * Padding like atheros hardware adds which is inbetween the 802.11 + * header and the payload is not supported, the driver is required + * to move the 802.11 header further back in that case. + */ + hdrlen = ieee80211_get_hdrlen(rx->fc); + if (rx->flags & IEEE80211_TXRXD_RX_AMSDU) + hdrlen += ETH_HLEN; + WARN_ON_ONCE(((unsigned long)(rx->skb->data + hdrlen)) & 3); +#endif } @@ -340,52 +364,6 @@ static u32 ieee80211_rx_load_stats(struct ieee80211_local *local, return load; } -#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT -static ieee80211_txrx_result -ieee80211_rx_h_verify_ip_alignment(struct ieee80211_txrx_data *rx) -{ - int hdrlen; - - if (!WLAN_FC_DATA_PRESENT(rx->fc)) - return TXRX_CONTINUE; - - /* - * Drivers are required to align the payload data in a way that - * guarantees that the contained IP header is aligned to a four- - * byte boundary. In the case of regular frames, this simply means - * aligning the payload to a four-byte boundary (because either - * the IP header is directly contained, or IV/RFC1042 headers that - * have a length divisible by four are in front of it. - * - * With A-MSDU frames, however, the payload data address must - * yield two modulo four because there are 14-byte 802.3 headers - * within the A-MSDU frames that push the IP header further back - * to a multiple of four again. Thankfully, the specs were sane - * enough this time around to require padding each A-MSDU subframe - * to a length that is a multiple of four. - * - * Padding like atheros hardware adds which is inbetween the 802.11 - * header and the payload is not supported, the driver is required - * to move the 802.11 header further back in that case. - */ - hdrlen = ieee80211_get_hdrlen(rx->fc); - if (rx->flags & IEEE80211_TXRXD_RX_AMSDU) - hdrlen += ETH_HLEN; - WARN_ON_ONCE(((unsigned long)(rx->skb->data + hdrlen)) & 3); - - return TXRX_CONTINUE; -} -#endif - -ieee80211_rx_handler ieee80211_rx_pre_handlers[] = -{ - ieee80211_rx_h_parse_qos, -#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT - ieee80211_rx_h_verify_ip_alignment, -#endif - NULL -}; - /* rx handlers */ static ieee80211_txrx_result @@ -1747,9 +1725,9 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, if (unlikely(local->sta_sw_scanning || local->sta_hw_scanning)) rx.flags |= IEEE80211_TXRXD_RXIN_SCAN; - if (__ieee80211_invoke_rx_handlers(local, local->rx_pre_handlers, &rx, - sta) != TXRX_CONTINUE) - goto end; + ieee80211_parse_qos(&rx); + ieee80211_verify_ip_alignment(&rx); + skb = rx.skb; if (sta && !(sta->flags & (WLAN_STA_WDS | WLAN_STA_ASSOC_AP)) &&