From: Karsten Wiese Date: Fri, 20 Oct 2006 21:45:36 +0000 (-0700) Subject: PCI: Remove quirk_via_abnormal_poweroff X-Git-Tag: v2.6.19-rc4~71^2 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3560cc5ec3488b20d927f7160a21a0df1d1fda20;p=linux-2.6 PCI: Remove quirk_via_abnormal_poweroff My K8T800 mobo resumes fine from suspend to ram with and without patch applied against 2.6.18. quirk_via_abnormal_poweroff makes some boards not boot 2.6.18, so IMO patch should go to head, 2.6.18.2 and everywhere "ACPI: ACPICA 20060623" has been applied. Remove quirk_via_abnormal_poweroff Obsoleted by "ACPI: ACPICA 20060623": Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Signed-off-by: Karsten Wiese Cc: Bob Moore Cc: "Brown, Len" Acked-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 687ab4a0c6..204b1c8e97 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); -#ifdef CONFIG_ACPI_SLEEP - -/* - * Some VIA systems boot with the abnormal status flag set. This can cause - * the BIOS to re-POST the system on resume rather than passing control - * back to the OS. Clear the flag on boot - */ -static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev) -{ - u32 reg; - - acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, - ®); - - if (reg & 0x800) { - printk("Clearing abnormal poweroff flag\n"); - acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_STATUS, - (u16)0x800); - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff); - -#endif - /* * CardBus controllers have a legacy base address that enables them * to respond as i82365 pcmcia controllers. We don't want them to