From: Hans-Jürgen Koch Date: Tue, 17 Apr 2007 17:42:56 +0000 (-0400) Subject: [MTD] Driver for AT26Fxxx dataflash devices X-Git-Tag: v2.6.22-rc1~1116^2~31 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=340ea370c2ce89d1c15fbf785460f2f74314ce58;p=linux-2.6 [MTD] Driver for AT26Fxxx dataflash devices Add support for AT26Fxxx dataflash devices. These devices have a quite different commandset than the AT45xxx chips, which are handled by at91_dataflash.c, so a combined driver turned out to be more ugly than useful. Tested only on AT26F004. Signed-off-by: Hans-Jürgen Koch Signed-off-by: Thomas Gleixner Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 440f6851da..bef0f0d2c2 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -60,6 +60,14 @@ config MTD_DATAFLASH Sometimes DataFlash chips are packaged inside MMC-format cards; at this writing, the MMC stack won't handle those. +config MTD_DATAFLASH26 + tristate "AT91RM9200 DataFlash AT26xxx" + depends on MTD && ARCH_AT91RM9200 && AT91_SPI + help + This enables access to the DataFlash chip (AT26xxx) on an + AT91RM9200-based board. + If you have such a board and such a DataFlash, say 'Y'. + config MTD_M25P80 tristate "Support for M25 SPI Flash" depends on MTD && SPI_MASTER && EXPERIMENTAL diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 0f788d5c4b..8ab568b3f5 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -16,4 +16,5 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o +obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o obj-$(CONFIG_MTD_M25P80) += m25p80.o diff --git a/drivers/mtd/devices/at91_dataflash26.c b/drivers/mtd/devices/at91_dataflash26.c new file mode 100644 index 0000000000..64ce37f986 --- /dev/null +++ b/drivers/mtd/devices/at91_dataflash26.c @@ -0,0 +1,485 @@ +/* + * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder) + * This is a largely modified version of at91_dataflash.c that + * supports AT26xxx dataflash chips. The original driver supports + * AT45xxx chips. + * + * Note: This driver was only tested with an AT26F004. It should be + * easy to make it work with other AT26xxx dataflash devices, though. + * + * Copyright (C) 2007 Hans J. Koch + * original Copyright (C) SAN People (Pty) Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */ + +#define MANUFACTURER_ID_ATMEL 0x1F + +/* command codes */ + +#define AT26_OP_READ_STATUS 0x05 +#define AT26_OP_READ_DEV_ID 0x9F +#define AT26_OP_ERASE_PAGE_4K 0x20 +#define AT26_OP_READ_ARRAY_FAST 0x0B +#define AT26_OP_SEQUENTIAL_WRITE 0xAF +#define AT26_OP_WRITE_ENABLE 0x06 +#define AT26_OP_WRITE_DISABLE 0x04 +#define AT26_OP_SECTOR_PROTECT 0x36 +#define AT26_OP_SECTOR_UNPROTECT 0x39 + +/* status register bits */ + +#define AT26_STATUS_BUSY 0x01 +#define AT26_STATUS_WRITE_ENABLE 0x02 + +struct dataflash_local +{ + int spi; /* SPI chip-select number */ + unsigned int page_size; /* number of bytes per page */ +}; + + +/* Detected DataFlash devices */ +static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES]; +static int nr_devices = 0; + +/* Allocate a single SPI transfer descriptor. We're assuming that if multiple + SPI transfers occur at the same time, spi_access_bus() will serialize them. + If this is not valid, then either (i) each dataflash 'priv' structure + needs it's own transfer descriptor, (ii) we lock this one, or (iii) use + another mechanism. */ +static struct spi_transfer_list* spi_transfer_desc; + +/* + * Perform a SPI transfer to access the DataFlash device. + */ +static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len, + char* txnext, int txnext_len, char* rxnext, int rxnext_len) +{ + struct spi_transfer_list* list = spi_transfer_desc; + + list->tx[0] = tx; list->txlen[0] = tx_len; + list->rx[0] = rx; list->rxlen[0] = rx_len; + + list->tx[1] = txnext; list->txlen[1] = txnext_len; + list->rx[1] = rxnext; list->rxlen[1] = rxnext_len; + + list->nr_transfers = nr; + /* Note: spi_transfer() always returns 0, there are no error checks */ + return spi_transfer(list); +} + +/* + * Return the status of the DataFlash device. + */ +static unsigned char at91_dataflash26_status(void) +{ + unsigned char command[2]; + + command[0] = AT26_OP_READ_STATUS; + command[1] = 0; + + do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); + + return command[1]; +} + +/* + * Poll the DataFlash device until it is READY. + */ +static unsigned char at91_dataflash26_waitready(void) +{ + unsigned char status; + + while (1) { + status = at91_dataflash26_status(); + if (!(status & AT26_STATUS_BUSY)) + return status; + } +} + +/* + * Enable/disable write access + */ + static void at91_dataflash26_write_enable(int enable) +{ + unsigned char cmd[2]; + + DEBUG(MTD_DEBUG_LEVEL3, "write_enable: enable=%i\n", enable); + + if (enable) + cmd[0] = AT26_OP_WRITE_ENABLE; + else + cmd[0] = AT26_OP_WRITE_DISABLE; + cmd[1] = 0; + + do_spi_transfer(1, cmd, 2, cmd, 2, NULL, 0, NULL, 0); +} + +/* + * Protect/unprotect sector + */ + static void at91_dataflash26_sector_protect(loff_t addr, int protect) +{ + unsigned char cmd[4]; + + DEBUG(MTD_DEBUG_LEVEL3, "sector_protect: addr=0x%06x prot=%d\n", + addr, protect); + + if (protect) + cmd[0] = AT26_OP_SECTOR_PROTECT; + else + cmd[0] = AT26_OP_SECTOR_UNPROTECT; + cmd[1] = (addr & 0x00FF0000) >> 16; + cmd[2] = (addr & 0x0000FF00) >> 8; + cmd[3] = (addr & 0x000000FF); + + do_spi_transfer(1, cmd, 4, cmd, 4, NULL, 0, NULL, 0); +} + +/* + * Erase blocks of flash. + */ +static int at91_dataflash26_erase(struct mtd_info *mtd, + struct erase_info *instr) +{ + struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; + unsigned char cmd[4]; + + DEBUG(MTD_DEBUG_LEVEL1, "dataflash_erase: addr=0x%06x len=%i\n", + instr->addr, instr->len); + + /* Sanity checks */ + if (priv->page_size != 4096) + return -EINVAL; /* Can't handle other sizes at the moment */ + + if ( ((instr->len % mtd->erasesize) != 0) + || ((instr->len % priv->page_size) != 0) + || ((instr->addr % priv->page_size) != 0) + || ((instr->addr + instr->len) > mtd->size)) + return -EINVAL; + + spi_access_bus(priv->spi); + + while (instr->len > 0) { + at91_dataflash26_write_enable(1); + at91_dataflash26_sector_protect(instr->addr, 0); + at91_dataflash26_write_enable(1); + cmd[0] = AT26_OP_ERASE_PAGE_4K; + cmd[1] = (instr->addr & 0x00FF0000) >> 16; + cmd[2] = (instr->addr & 0x0000FF00) >> 8; + cmd[3] = (instr->addr & 0x000000FF); + + DEBUG(MTD_DEBUG_LEVEL3, "ERASE: (0x%02x) 0x%02x 0x%02x" + "0x%02x\n", + cmd[0], cmd[1], cmd[2], cmd[3]); + + do_spi_transfer(1, cmd, 4, cmd, 4, NULL, 0, NULL, 0); + at91_dataflash26_waitready(); + + instr->addr += priv->page_size; /* next page */ + instr->len -= priv->page_size; + } + + at91_dataflash26_write_enable(0); + spi_release_bus(priv->spi); + + /* Inform MTD subsystem that erase is complete */ + instr->state = MTD_ERASE_DONE; + if (instr->callback) + instr->callback(instr); + + return 0; +} + +/* + * Read from the DataFlash device. + * from : Start offset in flash device + * len : Number of bytes to read + * retlen : Number of bytes actually read + * buf : Buffer that will receive data + */ +static int at91_dataflash26_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; + unsigned char cmd[5]; + + DEBUG(MTD_DEBUG_LEVEL1, "dataflash_read: %lli .. %lli\n", + from, from+len); + + *retlen = 0; + + /* Sanity checks */ + if (!len) + return 0; + if (from + len > mtd->size) + return -EINVAL; + + cmd[0] = AT26_OP_READ_ARRAY_FAST; + cmd[1] = (from & 0x00FF0000) >> 16; + cmd[2] = (from & 0x0000FF00) >> 8; + cmd[3] = (from & 0x000000FF); + /* cmd[4] is a "Don't care" byte */ + + DEBUG(MTD_DEBUG_LEVEL3, "READ: (0x%02x) 0x%02x 0x%02x 0x%02x\n", + cmd[0], cmd[1], cmd[2], cmd[3]); + + spi_access_bus(priv->spi); + do_spi_transfer(2, cmd, 5, cmd, 5, buf, len, buf, len); + spi_release_bus(priv->spi); + + *retlen = len; + return 0; +} + +/* + * Write to the DataFlash device. + * to : Start offset in flash device + * len : Number of bytes to write + * retlen : Number of bytes actually written + * buf : Buffer containing the data + */ +static int at91_dataflash26_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; + unsigned int addr, buf_index = 0; + int ret = -EIO, sector, last_sector; + unsigned char status, cmd[5]; + + DEBUG(MTD_DEBUG_LEVEL1, "dataflash_write: %lli .. %lli\n", to, to+len); + + *retlen = 0; + + /* Sanity checks */ + if (!len) + return 0; + if (to + len > mtd->size) + return -EINVAL; + + spi_access_bus(priv->spi); + + addr = to; + last_sector = -1; + + while (buf_index < len) { + sector = addr / priv->page_size; + /* Write first byte if a new sector begins */ + if (sector != last_sector) { + at91_dataflash26_write_enable(1); + at91_dataflash26_sector_protect(addr, 0); + at91_dataflash26_write_enable(1); + + /* Program first byte of a new sector */ + cmd[0] = AT26_OP_SEQUENTIAL_WRITE; + cmd[1] = (addr & 0x00FF0000) >> 16; + cmd[2] = (addr & 0x0000FF00) >> 8; + cmd[3] = (addr & 0x000000FF); + cmd[4] = buf[buf_index++]; + do_spi_transfer(1, cmd, 5, cmd, 5, NULL, 0, NULL, 0); + status = at91_dataflash26_waitready(); + addr++; + /* On write errors, the chip resets the write enable + flag. This also happens after the last byte of a + sector is successfully programmed. */ + if ( ( !(status & AT26_STATUS_WRITE_ENABLE)) + && ((addr % priv->page_size) != 0) ) { + DEBUG(MTD_DEBUG_LEVEL1, + "write error1: addr=0x%06x, " + "status=0x%02x\n", addr, status); + goto write_err; + } + (*retlen)++; + last_sector = sector; + } + + /* Write subsequent bytes in the same sector */ + cmd[0] = AT26_OP_SEQUENTIAL_WRITE; + cmd[1] = buf[buf_index++]; + do_spi_transfer(1, cmd, 2, cmd, 2, NULL, 0, NULL, 0); + status = at91_dataflash26_waitready(); + addr++; + + if ( ( !(status & AT26_STATUS_WRITE_ENABLE)) + && ((addr % priv->page_size) != 0) ) { + DEBUG(MTD_DEBUG_LEVEL1, "write error2: addr=0x%06x, " + "status=0x%02x\n", addr, status); + goto write_err; + } + + (*retlen)++; + } + + ret = 0; + at91_dataflash26_write_enable(0); +write_err: + spi_release_bus(priv->spi); + return ret; +} + +/* + * Initialize and register DataFlash device with MTD subsystem. + */ +static int __init add_dataflash(int channel, char *name, int nr_pages, + int pagesize) +{ + struct mtd_info *device; + struct dataflash_local *priv; + + if (nr_devices >= DATAFLASH_MAX_DEVICES) { + printk(KERN_ERR "at91_dataflash26: Too many devices " + "detected\n"); + return 0; + } + + device = kzalloc(sizeof(struct mtd_info) + strlen(name) + 8, + GFP_KERNEL); + if (!device) + return -ENOMEM; + + device->name = (char *)&device[1]; + sprintf(device->name, "%s.spi%d", name, channel); + device->size = nr_pages * pagesize; + device->erasesize = pagesize; + device->owner = THIS_MODULE; + device->type = MTD_DATAFLASH; + device->flags = MTD_CAP_NORFLASH; + device->erase = at91_dataflash26_erase; + device->read = at91_dataflash26_read; + device->write = at91_dataflash26_write; + + priv = (struct dataflash_local *)kzalloc(sizeof(struct dataflash_local), + GFP_KERNEL); + if (!priv) { + kfree(device); + return -ENOMEM; + } + + priv->spi = channel; + priv->page_size = pagesize; + device->priv = priv; + + mtd_devices[nr_devices] = device; + nr_devices++; + printk(KERN_INFO "at91_dataflash26: %s detected [spi%i] (%i bytes)\n", + name, channel, device->size); + + return add_mtd_device(device); +} + +/* + * Detect and initialize DataFlash device connected to specified SPI channel. + * + */ + +struct dataflash26_types { + unsigned char id0; + unsigned char id1; + char *name; + int pagesize; + int nr_pages; +}; + +struct dataflash26_types df26_types[] = { + { + .id0 = 0x04, + .id1 = 0x00, + .name = "AT26F004", + .pagesize = 4096, + .nr_pages = 128, + }, + { + .id0 = 0x45, + .id1 = 0x01, + .name = "AT26DF081A", /* Not tested ! */ + .pagesize = 4096, + .nr_pages = 256, + }, +}; + +static int __init at91_dataflash26_detect(int channel) +{ + unsigned char status, cmd[5]; + int i; + + spi_access_bus(channel); + status = at91_dataflash26_status(); + + if (status == 0 || status == 0xff) { + printk(KERN_ERR "at91_dataflash26_detect: status error %d\n", + status); + spi_release_bus(channel); + return -ENODEV; + } + + cmd[0] = AT26_OP_READ_DEV_ID; + do_spi_transfer(1, cmd, 5, cmd, 5, NULL, 0, NULL, 0); + spi_release_bus(channel); + + if (cmd[1] != MANUFACTURER_ID_ATMEL) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(df26_types); i++) { + if ( cmd[2] == df26_types[i].id0 + && cmd[3] == df26_types[i].id1) + return add_dataflash(channel, + df26_types[i].name, + df26_types[i].nr_pages, + df26_types[i].pagesize); + } + + printk(KERN_ERR "at91_dataflash26_detect: Unsupported device " + "(0x%02x/0x%02x)\n", cmd[2], cmd[3]); + return -ENODEV; +} + +static int __init at91_dataflash26_init(void) +{ + spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), + GFP_KERNEL); + if (!spi_transfer_desc) + return -ENOMEM; + + /* DataFlash (SPI chip select 0) */ + at91_dataflash26_detect(0); + +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card (SPI chip select 3) */ + at91_dataflash26_detect(3); +#endif + return 0; +} + +static void __exit at91_dataflash26_exit(void) +{ + int i; + + for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) { + if (mtd_devices[i]) { + del_mtd_device(mtd_devices[i]); + kfree(mtd_devices[i]->priv); + kfree(mtd_devices[i]); + } + } + nr_devices = 0; + kfree(spi_transfer_desc); +} + +module_init(at91_dataflash26_init); +module_exit(at91_dataflash26_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Hans J. Koch"); +MODULE_DESCRIPTION("DataFlash AT26xxx driver for Atmel AT91RM9200");