From: Bartlomiej Zolnierkiewicz Date: Thu, 24 Jul 2008 20:53:29 +0000 (+0200) Subject: ide: remove X-Git-Tag: v2.6.27-rc1~509^2~22 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2c9d86438a0104800da2a8ecdc1e27baf38ba6a4;p=linux-2.6 ide: remove Remove and . This has been a broken code for some time now and needs rewrite to match IDE core code / host driver model anyway. Cc: Jesper Nilsson Cc: Mikael Starvik Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/include/asm-cris/arch-v10/ide.h b/include/asm-cris/arch-v10/ide.h deleted file mode 100644 index 5366e62393..0000000000 --- a/include/asm-cris/arch-v10/ide.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/include/asm-cris/ide.h - * - * Copyright (C) 2000, 2001, 2002 Axis Communications AB - * - * Authors: Bjorn Wesen - * - */ - -/* - * This file contains the ETRAX 100LX specific IDE code. - */ - -#ifndef __ASMCRIS_IDE_H -#define __ASMCRIS_IDE_H - -#ifdef __KERNEL__ - -#include -#include -#include - - -/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */ - -#define MAX_HWIFS 4 - -static inline int ide_default_irq(unsigned long base) -{ - /* all IDE busses share the same IRQ, number 4. - * this has the side-effect that ide-probe.c will cluster our 4 interfaces - * together in a hwgroup, and will serialize accesses. this is good, because - * we can't access more than one interface at the same time on ETRAX100. - */ - return 4; -} - -static inline unsigned long ide_default_io_base(int index) -{ - /* we have no real I/O base address per interface, since all go through the - * same register. but in a bitfield in that register, we have the i/f number. - * so we can use the io_base to remember that bitfield. - */ - static const unsigned long io_bases[MAX_HWIFS] = { - IO_FIELD(R_ATA_CTRL_DATA, sel, 0), - IO_FIELD(R_ATA_CTRL_DATA, sel, 1), - IO_FIELD(R_ATA_CTRL_DATA, sel, 2), - IO_FIELD(R_ATA_CTRL_DATA, sel, 3) - }; - return io_bases[index]; -} - -/* this is called once for each interface, to setup the port addresses. data_port is the result - * of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us. - */ - -static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq) -{ - int i; - - /* fill in ports for ATA addresses 0 to 7 */ - for (i = 0; i <= 7; i++) { - hw->io_ports_array[i] = data_port | - IO_FIELD(R_ATA_CTRL_DATA, addr, i) | - IO_STATE(R_ATA_CTRL_DATA, cs0, active); - } - - /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */ - hw->io_ports.ctl_addr = data_port | - IO_FIELD(R_ATA_CTRL_DATA, addr, 6) | - IO_STATE(R_ATA_CTRL_DATA, cs1, active); - - /* whats this for ? */ - hw->io_ports.irq_addr = 0; -} - -static inline void ide_init_default_hwifs(void) -{ - hw_regs_t hw; - int index; - - for(index = 0; index < MAX_HWIFS; index++) { - ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL); - hw.irq = ide_default_irq(ide_default_io_base(index)); - ide_register_hw(&hw, NULL); - } -} - -#endif /* __KERNEL__ */ - -#endif /* __ASMCRIS_IDE_H */ diff --git a/include/asm-cris/arch-v32/ide.h b/include/asm-cris/arch-v32/ide.h deleted file mode 100644 index fb9c3627a5..0000000000 --- a/include/asm-cris/arch-v32/ide.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-cris/ide.h - * - * Copyright (C) 2000-2004 Axis Communications AB - * - * Authors: Bjorn Wesen, Mikael Starvik - * - */ - -/* - * This file contains the ETRAX FS specific IDE code. - */ - -#ifndef __ASMCRIS_IDE_H -#define __ASMCRIS_IDE_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include - - -/* ETRAX FS can support 4 IDE busses on the same pins (serialized) */ - -#define MAX_HWIFS 4 - -static inline int ide_default_irq(unsigned long base) -{ - /* all IDE busses share the same IRQ, - * this has the side-effect that ide-probe.c will cluster our 4 interfaces - * together in a hwgroup, and will serialize accesses. this is good, because - * we can't access more than one interface at the same time on ETRAX100. - */ - return ATA_INTR_VECT; -} - -static inline unsigned long ide_default_io_base(int index) -{ - reg_ata_rw_ctrl2 ctrl2 = {.sel = index}; - /* we have no real I/O base address per interface, since all go through the - * same register. but in a bitfield in that register, we have the i/f number. - * so we can use the io_base to remember that bitfield. - */ - ctrl2.sel = index; - - return REG_TYPE_CONV(unsigned long, reg_ata_rw_ctrl2, ctrl2); -} - -#define IDE_ARCH_ACK_INTR -#define ide_ack_intr(hwif) ((hwif)->ack_intr(hwif)) - -#endif /* __KERNEL__ */ - -#endif /* __ASMCRIS_IDE_H */ diff --git a/include/asm-cris/ide.h b/include/asm-cris/ide.h deleted file mode 100644 index a894f66665..0000000000 --- a/include/asm-cris/ide.h +++ /dev/null @@ -1 +0,0 @@ -#include