From: Lennert Buytenhek Date: Sat, 31 May 2008 23:22:37 +0000 (+0200) Subject: mv643xx_eth: delete unused port serial control register bit defines X-Git-Tag: v2.6.27-rc1~969^2~289^2~12^2~32 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2beff77b6e02f52376843fbea3df9d620ee24903;p=linux-2.6 mv643xx_eth: delete unused port serial control register bit defines Over half of the port serial control register bit defines are never used, and the PORT_SERIAL_CONTROL_DEFAULT_VALUE define is never used either. Keep only those defines that are actually used. Signed-off-by: Lennert Buytenhek Acked-by: Dale Farnsworth --- diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index ea7a578836..e61cfd4c05 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -141,71 +141,23 @@ static char mv643xx_driver_version[] = "1.0"; #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif -/* These macros describe Ethernet Port serial control reg (PSCR) bits */ -#define SERIAL_PORT_DISABLE (0 << 0) -#define SERIAL_PORT_ENABLE (1 << 0) -#define DO_NOT_FORCE_LINK_PASS (0 << 1) -#define FORCE_LINK_PASS (1 << 1) -#define ENABLE_AUTO_NEG_FOR_DUPLX (0 << 2) -#define DISABLE_AUTO_NEG_FOR_DUPLX (1 << 2) -#define ENABLE_AUTO_NEG_FOR_FLOW_CTRL (0 << 3) -#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3) -#define ADV_NO_FLOW_CTRL (0 << 4) -#define ADV_SYMMETRIC_FLOW_CTRL (1 << 4) -#define FORCE_FC_MODE_NO_PAUSE_DIS_TX (0 << 5) -#define FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5) -#define FORCE_BP_MODE_NO_JAM (0 << 7) -#define FORCE_BP_MODE_JAM_TX (1 << 7) -#define FORCE_BP_MODE_JAM_TX_ON_RX_ERR (2 << 7) -#define SERIAL_PORT_CONTROL_RESERVED (1 << 9) -#define FORCE_LINK_FAIL (0 << 10) -#define DO_NOT_FORCE_LINK_FAIL (1 << 10) -#define RETRANSMIT_16_ATTEMPTS (0 << 11) -#define RETRANSMIT_FOREVER (1 << 11) -#define ENABLE_AUTO_NEG_SPEED_GMII (0 << 13) -#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) -#define DTE_ADV_0 (0 << 14) -#define DTE_ADV_1 (1 << 14) -#define DISABLE_AUTO_NEG_BYPASS (0 << 15) -#define ENABLE_AUTO_NEG_BYPASS (1 << 15) -#define AUTO_NEG_NO_CHANGE (0 << 16) -#define RESTART_AUTO_NEG (1 << 16) -#define MAX_RX_PACKET_1518BYTE (0 << 17) + +/* + * Port serial control register. + */ +#define SET_MII_SPEED_TO_100 (1 << 24) +#define SET_GMII_SPEED_TO_1000 (1 << 23) +#define SET_FULL_DUPLEX_MODE (1 << 21) #define MAX_RX_PACKET_1522BYTE (1 << 17) -#define MAX_RX_PACKET_1552BYTE (2 << 17) -#define MAX_RX_PACKET_9022BYTE (3 << 17) -#define MAX_RX_PACKET_9192BYTE (4 << 17) #define MAX_RX_PACKET_9700BYTE (5 << 17) #define MAX_RX_PACKET_MASK (7 << 17) -#define CLR_EXT_LOOPBACK (0 << 20) -#define SET_EXT_LOOPBACK (1 << 20) -#define SET_HALF_DUPLEX_MODE (0 << 21) -#define SET_FULL_DUPLEX_MODE (1 << 21) -#define DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (0 << 22) -#define ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22) -#define SET_GMII_SPEED_TO_10_100 (0 << 23) -#define SET_GMII_SPEED_TO_1000 (1 << 23) -#define SET_MII_SPEED_TO_10 (0 << 24) -#define SET_MII_SPEED_TO_100 (1 << 24) - -#define PORT_SERIAL_CONTROL_DEFAULT_VALUE \ - DO_NOT_FORCE_LINK_PASS | \ - ENABLE_AUTO_NEG_FOR_DUPLX | \ - DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \ - ADV_SYMMETRIC_FLOW_CTRL | \ - FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* reserved */ | \ - DO_NOT_FORCE_LINK_FAIL | \ - RETRANSMIT_16_ATTEMPTS | \ - ENABLE_AUTO_NEG_SPEED_GMII | \ - DTE_ADV_0 | \ - DISABLE_AUTO_NEG_BYPASS | \ - AUTO_NEG_NO_CHANGE | \ - MAX_RX_PACKET_9700BYTE | \ - CLR_EXT_LOOPBACK | \ - SET_FULL_DUPLEX_MODE | \ - ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX +#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) +#define DO_NOT_FORCE_LINK_FAIL (1 << 10) +#define SERIAL_PORT_CONTROL_RESERVED (1 << 9) +#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3) +#define DISABLE_AUTO_NEG_FOR_DUPLEX (1 << 2) +#define FORCE_LINK_PASS (1 << 1) +#define SERIAL_PORT_ENABLE (1 << 0) /* These macros describe Ethernet Serial Status reg (PSR) bits */ #define PORT_STATUS_MODE_10_BIT (1 << 0) @@ -2196,7 +2148,7 @@ static void eth_port_start(struct net_device *dev) pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL | DISABLE_AUTO_NEG_SPEED_GMII | - DISABLE_AUTO_NEG_FOR_DUPLX | + DISABLE_AUTO_NEG_FOR_DUPLEX | DO_NOT_FORCE_LINK_FAIL | SERIAL_PORT_CONTROL_RESERVED;