From: Zang Roy-r61911 Date: Tue, 13 Jun 2006 07:07:23 +0000 (+0800) Subject: [POWERPC] Add tsi108 pci and platform device data register function X-Git-Tag: v2.6.18-rc1~358^2~7 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2b9d7467a6dbc41872c605511e105cbde1eda100;p=linux-2.6 [POWERPC] Add tsi108 pci and platform device data register function Add Tundra Semiconductor tsi108 pci and platform device data register function support. Signed-off-by: Alexandre Bounine Signed-off-by: Roy Zang --- Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index cef95b0237..63e81e74b4 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o +obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c new file mode 100644 index 0000000000..26a0cc820c --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -0,0 +1,145 @@ +/* + * tsi108/109 device setup code + * + * Maintained by Roy Zang < tie-fei.zang@freescale.com > + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +static phys_addr_t tsi108_csr_base = -1; + +phys_addr_t get_csrbase(void) +{ + struct device_node *tsi; + + if (tsi108_csr_base != -1) + return tsi108_csr_base; + + tsi = of_find_node_by_type(NULL, "tsi-bridge"); + if (tsi) { + unsigned int size; + void *prop = get_property(tsi, "reg", &size); + tsi108_csr_base = of_translate_address(tsi, prop); + of_node_put(tsi); + }; + return tsi108_csr_base; +} + +u32 get_vir_csrbase(void) +{ + return (u32) (ioremap(get_csrbase(), 0x10000)); +} + +EXPORT_SYMBOL(get_csrbase); +EXPORT_SYMBOL(get_vir_csrbase); + +static int __init tsi108_eth_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *tsi_eth_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL; + i++) { + struct resource r[2]; + struct device_node *phy; + hw_info tsi_eth_data; + unsigned int *id; + unsigned int *phy_id; + void *mac_addr; + phandle *ph; + + memset(r, 0, sizeof(r)); + memset(&tsi_eth_data, 0, sizeof(tsi_eth_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[0].name, r[0].start, r[0].end); + if (ret) + goto err; + + r[1].name = "tx"; + r[1].start = np->intrs[0].line; + r[1].end = np->intrs[0].line; + r[1].flags = IORESOURCE_IRQ; + + tsi_eth_dev = + platform_device_register_simple("tsi-ethernet", i, &r[0], + np->n_intrs + 1); + + if (IS_ERR(tsi_eth_dev)) { + ret = PTR_ERR(tsi_eth_dev); + goto err; + } + + mac_addr = get_property(np, "address", NULL); + memcpy(tsi_eth_data.mac_addr, mac_addr, 6); + + ph = (phandle *) get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + id = (u32 *) get_property(phy, "reg", NULL); + phy_id = (u32 *) get_property(phy, "phy-id", NULL); + ret = of_address_to_resource(phy, 0, &res); + if (ret) { + of_node_put(phy); + goto unreg; + } + tsi_eth_data.regs = r[0].start; + tsi_eth_data.phyregs = res.start; + tsi_eth_data.phy = *phy_id; + tsi_eth_data.irq_num = np->intrs[0].line; + of_node_put(phy); + ret = + platform_device_add_data(tsi_eth_dev, &tsi_eth_data, + sizeof(hw_info)); + if (ret) + goto unreg; + } + return 0; +unreg: + platform_device_unregister(tsi_eth_dev); +err: + return ret; +} + +arch_initcall(tsi108_eth_of_init); diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c new file mode 100644 index 0000000000..3265d54c82 --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -0,0 +1,412 @@ +/* + * Common routines for Tundra Semiconductor TSI108 host bridge. + * + * 2004-2005 (c) Tundra Semiconductor Corp. + * Author: Alex Bounine (alexandreb@tundra.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define tsi_mk_config_addr(bus, devfunc, offset) \ + ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base) + +u32 tsi108_pci_cfg_base; +u32 tsi108_csr_vir_base; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_read_reg(u32 reg_offset); +extern void tsi108_write_reg(u32 reg_offset, u32 val); + +int +tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc, + int offset, int len, u32 val) +{ + volatile unsigned char *cfg_addr; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfunc)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfunc, offset) | + (offset & 0x03)); + +#ifdef DEBUG + printk("PCI CFG write : "); + printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%08x\n", val); +#endif + + switch (len) { + case 1: + out_8((u8 *) cfg_addr, val); + break; + case 2: + out_le16((u16 *) cfg_addr, val); + break; + default: + out_le32((u32 *) cfg_addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_error(u32 pci_cfg_base) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear PB and PCI error flags set as result + * of PCI/X configuration read requests. + */ + + /* Read PB Error Log Registers */ + + err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS); + err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR); + + if (err_stat & TSI108_PB_ERRCS_ES) { + /* Clear error flag */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS, + TSI108_PB_ERRCS_ES); + + /* Clear read error reported in PB_ISR */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR, + TSI108_PB_ISR_PBS_RD_ERR); + + /* Clear PCI/X bus cfg errors if applicable */ + if ((err_addr & 0xFF000000) == pci_cfg_base) { + pci_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR, + pci_stat); + } + } + + return; +} + +#define __tsi108_read_pci_config(x, addr, op) \ + __asm__ __volatile__( \ + " "op" %0,0,%1\n" \ + "1: eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r"(x) : "r"(addr)) + +int +tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + volatile unsigned char *cfg_addr; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfn, + offset) | (offset & + 0x03)); + + switch (len) { + case 1: + __tsi108_read_pci_config(temp, cfg_addr, "lbzx"); + break; + case 2: + __tsi108_read_pci_config(temp, cfg_addr, "lhbrx"); + break; + default: + __tsi108_read_pci_config(temp, cfg_addr, "lwbrx"); + break; + } + + *val = temp; + +#ifdef DEBUG + if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) { + printk("PCI CFG read : "); + printk("%d:0x%x:0x%x ", bus->number, devfn, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%x\n", *val); + } +#endif + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_cfg_error(void) +{ + tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS); +} + +static struct pci_ops tsi108_direct_pci_ops = { + tsi108_direct_read_config, + tsi108_direct_write_config +}; + +int __init tsi108_setup_pci(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 0, has_address = 0; + + /* PCI Config mapping */ + tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS, + TSI108_PCI_CFG_SIZE); + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__, + tsi108_pci_cfg_base); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *)get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + + if (!hose) { + printk("PCI Host bridge init failed\n"); + return -ENOMEM; + } + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + (hose)->ops = &tsi108_direct_pci_ops; + + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + return 0; +} + +/* + * Low level utility functions + */ + +static void tsi108_pci_int_mask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg |= (1 << int_line); /* INTx_DIR = output */ + irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); +} + +static void tsi108_pci_int_unmask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg &= ~(1 << int_line); + irp_cfg |= (3 << (8 + (int_line * 2))); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); +} + +static void init_pci_source(void) +{ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, + 0x0000ff00); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +static inline int get_pci_source(void) +{ + u_int temp = 0; + int irq = -1; + int i; + u_int pci_irp_stat; + static int mask = 0; + + /* Read PCI/X block interrupt status register */ + pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + mb(); + + if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) { + /* Process Interrupt from PCI bus INTA# - INTD# lines */ + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_INTAD) & 0xf; + mb(); + for (i = 0; i < 4; i++, mask++) { + if (temp & (1 << mask % 4)) { + irq = IRQ_PCI_INTA + mask % 4; + mask++; + break; + } + } + + /* Disable interrupts from PCI block */ + temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + temp & ~TSI108_PCI_IRP_ENABLE_P_INT); + mb(); + (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + } +#ifdef DEBUG + else { + printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); + pci_irp_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD); + mb(); + printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + printk("cfg_ctl=0x%08x ", temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + printk("irp_enable=0x%08x\n", temp); + } +#endif /* end of DEBUG */ + + return irq; +} + + +/* + * Linux descriptor level callbacks + */ + +static void tsi108_pci_irq_enable(u_int irq) +{ + tsi108_pci_int_unmask(irq); +} + +static void tsi108_pci_irq_disable(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_ack(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_end(u_int irq) +{ + tsi108_pci_int_unmask(irq); + + /* Enable interrupts from PCI block */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_ENABLE) | + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +/* + * Interrupt controller descriptor for cascaded PCI interrupt controller. + */ + +struct hw_interrupt_type tsi108_pci_irq = { + .typename = "tsi108_PCI_int", + .enable = tsi108_pci_irq_enable, + .disable = tsi108_pci_irq_disable, + .ack = tsi108_pci_irq_ack, + .end = tsi108_pci_irq_end, +}; + +/* + * Exported functions + */ + +/* + * The Tsi108 PCI interrupts initialization routine. + * + * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block + * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the + * PCI block has to be treated as a cascaded interrupt controller connected + * to the MPIC. + */ + +void __init tsi108_pci_int_init(void) +{ + u_int i; + + DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); + + for (i = 0; i < NUM_PCI_IRQS; i++) { + irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; + } + + init_pci_source(); +} + +int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +{ + return get_pci_source(); +} diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h new file mode 100644 index 0000000000..c4c278d72f --- /dev/null +++ b/include/asm-powerpc/tsi108.h @@ -0,0 +1,109 @@ +/* + * include/asm-ppc/tsi108.h + * + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * 2004 (c) Freescale Semiconductor Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_BASE_PHYS (0xfb000000) +#define TSI108_PCI_CFG_SIZE (0x01000000) +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); +extern unsigned long tsi108_get_mem_size(void); +extern unsigned long tsi108_get_cpu_clk(void); +extern unsigned long tsi108_get_sdc_clk(void); +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +extern inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +extern inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */