From: Miklos Vajna Date: Tue, 13 May 2008 16:38:56 +0000 (+0200) Subject: x86/PCI: janitor work in irq.c X-Git-Tag: v2.6.27-rc1~1046^2~66 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=273c11270d3715c4c06d4df1607a1a60034d887b;p=linux-2.6 x86/PCI: janitor work in irq.c Wrapped long lines, removed trailing whitespaces, fixed case indentation inside switch and so. Signed-off-by: Miklos Vajna Signed-off-by: Jesse Barnes --- diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index ca8df9c260..c422e10337 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include @@ -45,7 +45,8 @@ struct irq_router { char *name; u16 vendor, device; int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); - int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new); + int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, + int new); }; struct irq_router_handler { @@ -61,7 +62,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; * and perform checksum verification. */ -static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) { struct irq_routing_table *rt; int i; @@ -74,10 +75,11 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) rt->size < sizeof(struct irq_routing_table)) return NULL; sum = 0; - for (i=0; i < rt->size; i++) + for (i = 0; i < rt->size; i++) sum += addr[i]; if (!sum) { - DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt); + DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", + rt); return rt; } return NULL; @@ -100,7 +102,8 @@ static struct irq_routing_table * __init pirq_find_routing_table(void) return rt; printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); } - for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { + for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); + addr += 16) { rt = pirq_check_routing_table(addr); if (rt) return rt; @@ -122,20 +125,23 @@ static void __init pirq_peer_trick(void) struct irq_info *e; memset(busmap, 0, sizeof(busmap)); - for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { + for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info); i++) { e = &rt->slots[i]; #ifdef DEBUG { int j; - DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); - for(j=0; j<4; j++) - DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); + DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, + e->devfn/8, e->slot); + for (j = 0; j < 4; j++) + DBG(" %d:%02x/%04x", j, e->irq[j].link, + e->irq[j].bitmap); DBG("\n"); } #endif busmap[e->bus] = 1; } - for(i = 1; i < 256; i++) { + for (i = 1; i < 256; i++) { int node; if (!busmap[i] || pci_find_bus(0, i)) continue; @@ -174,7 +180,8 @@ void eisa_set_level_irq(unsigned int irq) * Common IRQ routing practice: nibbles in config space, * offset by some magic constant. */ -static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) +static unsigned int +read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) { u8 x; unsigned reg = offset + (nr >> 1); @@ -183,7 +190,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, return (nr & 1) ? (x >> 4) : (x & 0xf); } -static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val) +static void write_config_nybble(struct pci_dev *router, unsigned offset, + unsigned nr, unsigned int val) { u8 x; unsigned reg = offset + (nr >> 1); @@ -200,15 +208,18 @@ static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigne */ static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { - static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; + static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, + 11, 0, 12, 0, 14, 0, 15 }; WARN_ON_ONCE(pirq > 16); return irqmap[read_config_nybble(router, 0x48, pirq-1)]; } -static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; + static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, + 3, 9, 11, 0, 13, 15 }; unsigned int val = irqmap[irq]; WARN_ON_ONCE(pirq > 16); @@ -231,7 +242,8 @@ static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return (x < 16) ? x : 0; } -static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { pci_write_config_byte(router, pirq, irq); return 1; @@ -247,7 +259,8 @@ static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); } -static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); return 1; @@ -258,7 +271,8 @@ static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i * but without the ugly irq number munging. * However, for 82C586, nibble map is different . */ -static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +static int +pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; @@ -266,7 +280,8 @@ static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq return read_config_nybble(router, 0x55, pirqmap[pirq-1]); } -static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; @@ -285,10 +300,11 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; WARN_ON_ONCE(pirq > 4); - return read_config_nybble(router,0x43, pirqmap[pirq-1]); + return read_config_nybble(router, 0x43, pirqmap[pirq-1]); } -static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; @@ -306,7 +322,8 @@ static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0xb8, pirq >> 4); } -static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { write_config_nybble(router, 0xb8, pirq >> 4, irq); return 1; @@ -314,7 +331,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, /* * Cyrix: nibble offset 0x5C - * 0x5C bits 7:4 is INTB bits 3:0 is INTA + * 0x5C bits 7:4 is INTB bits 3:0 is INTA * 0x5D bits 7:4 is INTD bits 3:0 is INTC */ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) @@ -322,7 +339,8 @@ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0x5C, (pirq-1)^1); } -static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { write_config_nybble(router, 0x5C, (pirq-1)^1, irq); return 1; @@ -350,7 +368,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * Apparently there are systems implementing PCI routing table using * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. * We try our best to handle both link mappings. - * + * * Currently (2003-05-21) it appears most SiS chipsets follow the * definition of routing registers from the SiS-5595 southbridge. * According to the SiS 5595 datasheets the revision id's of the @@ -370,7 +388,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * * 0x62: USBIRQ: * bit 6 OHCI function disabled (0), enabled (1) - * + * * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved * * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved @@ -405,7 +423,8 @@ static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK); } -static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { u8 x; int reg; @@ -439,7 +458,8 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0x74, pirq-1); } -static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { WARN_ON_ONCE(pirq >= 9); if (pirq > 8) { @@ -461,13 +481,15 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, * and 0x03 for SMBus. */ -static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +static int +pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { outb(pirq, 0xc00); return inb(0xc01) & 0xf; } -static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) { outb(pirq, 0xc00); outb(irq, 0xc01); @@ -482,27 +504,27 @@ static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int * offset 0x56 0-3 PIRQA 4-7 PIRQB * offset 0x57 0-3 PIRQC 4-7 PIRQD */ -static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +static int +pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { u8 irq; irq = 0; if (pirq <= 4) - { irq = read_config_nybble(router, 0x56, pirq - 1); - } - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", + printk(KERN_INFO + "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", dev->vendor, dev->device, pirq, irq); return irq; } -static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", + printk(KERN_INFO + "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", dev->vendor, dev->device, pirq, irq); if (pirq <= 4) - { write_config_nybble(router, 0x56, pirq - 1, irq); - } return 1; } @@ -528,7 +550,8 @@ static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, #ifdef CONFIG_PCI_BIOS -static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { struct pci_dev *bridge; int pin = pci_get_interrupt_pin(dev, &bridge); @@ -537,11 +560,14 @@ static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, #endif -static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { static struct pci_device_id __initdata pirq_440gx[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82443GX_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82443GX_2) }, { }, }; @@ -549,50 +575,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route if (pci_dev_present(pirq_440gx)) return 0; - switch(device) - { - case PCI_DEVICE_ID_INTEL_82371FB_0: - case PCI_DEVICE_ID_INTEL_82371SB_0: - case PCI_DEVICE_ID_INTEL_82371AB_0: - case PCI_DEVICE_ID_INTEL_82371MX: - case PCI_DEVICE_ID_INTEL_82443MX_0: - case PCI_DEVICE_ID_INTEL_82801AA_0: - case PCI_DEVICE_ID_INTEL_82801AB_0: - case PCI_DEVICE_ID_INTEL_82801BA_0: - case PCI_DEVICE_ID_INTEL_82801BA_10: - case PCI_DEVICE_ID_INTEL_82801CA_0: - case PCI_DEVICE_ID_INTEL_82801CA_12: - case PCI_DEVICE_ID_INTEL_82801DB_0: - case PCI_DEVICE_ID_INTEL_82801E_0: - case PCI_DEVICE_ID_INTEL_82801EB_0: - case PCI_DEVICE_ID_INTEL_ESB_1: - case PCI_DEVICE_ID_INTEL_ICH6_0: - case PCI_DEVICE_ID_INTEL_ICH6_1: - case PCI_DEVICE_ID_INTEL_ICH7_0: - case PCI_DEVICE_ID_INTEL_ICH7_1: - case PCI_DEVICE_ID_INTEL_ICH7_30: - case PCI_DEVICE_ID_INTEL_ICH7_31: - case PCI_DEVICE_ID_INTEL_ESB2_0: - case PCI_DEVICE_ID_INTEL_ICH8_0: - case PCI_DEVICE_ID_INTEL_ICH8_1: - case PCI_DEVICE_ID_INTEL_ICH8_2: - case PCI_DEVICE_ID_INTEL_ICH8_3: - case PCI_DEVICE_ID_INTEL_ICH8_4: - case PCI_DEVICE_ID_INTEL_ICH9_0: - case PCI_DEVICE_ID_INTEL_ICH9_1: - case PCI_DEVICE_ID_INTEL_ICH9_2: - case PCI_DEVICE_ID_INTEL_ICH9_3: - case PCI_DEVICE_ID_INTEL_ICH9_4: - case PCI_DEVICE_ID_INTEL_ICH9_5: - case PCI_DEVICE_ID_INTEL_TOLAPAI_0: - case PCI_DEVICE_ID_INTEL_ICH10_0: - case PCI_DEVICE_ID_INTEL_ICH10_1: - case PCI_DEVICE_ID_INTEL_ICH10_2: - case PCI_DEVICE_ID_INTEL_ICH10_3: - r->name = "PIIX/ICH"; - r->get = pirq_piix_get; - r->set = pirq_piix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371SB_0: + case PCI_DEVICE_ID_INTEL_82371AB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + case PCI_DEVICE_ID_INTEL_82443MX_0: + case PCI_DEVICE_ID_INTEL_82801AA_0: + case PCI_DEVICE_ID_INTEL_82801AB_0: + case PCI_DEVICE_ID_INTEL_82801BA_0: + case PCI_DEVICE_ID_INTEL_82801BA_10: + case PCI_DEVICE_ID_INTEL_82801CA_0: + case PCI_DEVICE_ID_INTEL_82801CA_12: + case PCI_DEVICE_ID_INTEL_82801DB_0: + case PCI_DEVICE_ID_INTEL_82801E_0: + case PCI_DEVICE_ID_INTEL_82801EB_0: + case PCI_DEVICE_ID_INTEL_ESB_1: + case PCI_DEVICE_ID_INTEL_ICH6_0: + case PCI_DEVICE_ID_INTEL_ICH6_1: + case PCI_DEVICE_ID_INTEL_ICH7_0: + case PCI_DEVICE_ID_INTEL_ICH7_1: + case PCI_DEVICE_ID_INTEL_ICH7_30: + case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_ESB2_0: + case PCI_DEVICE_ID_INTEL_ICH8_0: + case PCI_DEVICE_ID_INTEL_ICH8_1: + case PCI_DEVICE_ID_INTEL_ICH8_2: + case PCI_DEVICE_ID_INTEL_ICH8_3: + case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_TOLAPAI_0: + case PCI_DEVICE_ID_INTEL_ICH10_0: + case PCI_DEVICE_ID_INTEL_ICH10_1: + case PCI_DEVICE_ID_INTEL_ICH10_2: + case PCI_DEVICE_ID_INTEL_ICH10_3: + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; } return 0; } @@ -606,7 +631,7 @@ static __init int via_router_probe(struct irq_router *r, * workarounds for some buggy BIOSes */ if (device == PCI_DEVICE_ID_VIA_82C586_0) { - switch(router->device) { + switch (router->device) { case PCI_DEVICE_ID_VIA_82C686: /* * Asus k7m bios wrongly reports 82C686A @@ -631,7 +656,7 @@ static __init int via_router_probe(struct irq_router *r, } } - switch(device) { + switch (device) { case PCI_DEVICE_ID_VIA_82C586_0: r->name = "VIA"; r->get = pirq_via586_get; @@ -652,88 +677,89 @@ static __init int via_router_probe(struct irq_router *r, return 0; } -static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_VLSI_82C534: - r->name = "VLSI 82C534"; - r->get = pirq_vlsi_get; - r->set = pirq_vlsi_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_VLSI_82C534: + r->name = "VLSI 82C534"; + r->get = pirq_vlsi_get; + r->set = pirq_vlsi_set; + return 1; } return 0; } -static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int serverworks_router_probe(struct irq_router *r, + struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_SERVERWORKS_OSB4: - case PCI_DEVICE_ID_SERVERWORKS_CSB5: - r->name = "ServerWorks"; - r->get = pirq_serverworks_get; - r->set = pirq_serverworks_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4: + case PCI_DEVICE_ID_SERVERWORKS_CSB5: + r->name = "ServerWorks"; + r->get = pirq_serverworks_get; + r->set = pirq_serverworks_set; + return 1; } return 0; } -static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { if (device != PCI_DEVICE_ID_SI_503) return 0; - + r->name = "SIS"; r->get = pirq_sis_get; r->set = pirq_sis_set; return 1; } -static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_CYRIX_5520: - r->name = "NatSemi"; - r->get = pirq_cyrix_get; - r->set = pirq_cyrix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_CYRIX_5520: + r->name = "NatSemi"; + r->get = pirq_cyrix_get; + r->set = pirq_cyrix_set; + return 1; } return 0; } -static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_OPTI_82C700: - r->name = "OPTI"; - r->get = pirq_opti_get; - r->set = pirq_opti_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_OPTI_82C700: + r->name = "OPTI"; + r->get = pirq_opti_get; + r->set = pirq_opti_set; + return 1; } return 0; } -static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_ITE_IT8330G_0: - r->name = "ITE"; - r->get = pirq_ite_get; - r->set = pirq_ite_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_ITE_IT8330G_0: + r->name = "ITE"; + r->get = pirq_ite_get; + r->set = pirq_ite_set; + return 1; } return 0; } -static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { + switch (device) { case PCI_DEVICE_ID_AL_M1533: case PCI_DEVICE_ID_AL_M1563: printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n"); @@ -745,28 +771,29 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, return 0; } -static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_AMD_VIPER_740B: - r->name = "AMD756"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7413: - r->name = "AMD766"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7443: - r->name = "AMD768"; - break; - default: - return 0; + switch (device) { + case PCI_DEVICE_ID_AMD_VIPER_740B: + r->name = "AMD756"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7413: + r->name = "AMD766"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7443: + r->name = "AMD768"; + break; + default: + return 0; } r->get = pirq_amd756_get; r->set = pirq_amd756_set; return 1; } - -static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) + +static __init int +pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { switch (device) { case PCI_DEVICE_ID_PICOPOWER_PT86C523: @@ -807,7 +834,7 @@ static struct pci_dev *pirq_router_dev; * FIXME: should we have an option to say "generic for * chipset" ? */ - + static void __init pirq_find_router(struct irq_router *r) { struct irq_routing_table *rt = pirq_table; @@ -826,7 +853,7 @@ static void __init pirq_find_router(struct irq_router *r) r->name = "default"; r->get = NULL; r->set = NULL; - + DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n", rt->rtr_vendor, rt->rtr_device); @@ -837,12 +864,14 @@ static void __init pirq_find_router(struct irq_router *r) return; } - for( h = pirq_routers; h->vendor; h++) { + for (h = pirq_routers; h->vendor; h++) { /* First look for a router match */ - if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device)) + if (rt->rtr_vendor == h->vendor && + h->probe(r, pirq_router_dev, rt->rtr_device)) break; /* Fall back to a device match */ - if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device)) + if (pirq_router_dev->vendor == h->vendor && + h->probe(r, pirq_router_dev, pirq_router_dev->device)) break; } printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n", @@ -857,11 +886,13 @@ static void __init pirq_find_router(struct irq_router *r) static struct irq_info *pirq_get_info(struct pci_dev *dev) { struct irq_routing_table *rt = pirq_table; - int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); + int entries = (rt->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info); struct irq_info *info; for (info = rt->slots; entries--; info++) - if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) + if (info->bus == dev->bus->number && + PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) return info; return NULL; } @@ -889,7 +920,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!pirq_table) return 0; - + DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin); info = pirq_get_info(dev); if (!info) { @@ -902,7 +933,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) DBG(" -> not routed\n" KERN_DEBUG); return 0; } - DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs); + DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, + pirq_table->exclusive_irqs); mask &= pcibios_irq_mask; /* Work around broken HP Pavilion Notebooks which assign USB to @@ -915,7 +947,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) } /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ - if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) { + if (acer_tm360_irqrouting && dev->irq == 11 && + dev->vendor == PCI_VENDOR_ID_O2) { pirq = 0x68; mask = 0x400; dev->irq = r->get(pirq_router_dev, dev, pirq); @@ -928,17 +961,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) */ newirq = dev->irq; if (newirq && !((1 << newirq) & mask)) { - if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0; - else printk("\n" KERN_WARNING - "PCI: IRQ %i for device %s doesn't match PIRQ mask " - "- try pci=usepirqmask\n" KERN_DEBUG, newirq, - pci_name(dev)); + if (pci_probe & PCI_USE_PIRQ_MASK) + newirq = 0; + else + printk("\n" KERN_WARNING + "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n" + KERN_DEBUG, newirq, + pci_name(dev)); } if (!newirq && assign) { for (i = 0; i < 16; i++) { if (!(mask & (1 << i))) continue; - if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED)) + if (pirq_penalty[i] < pirq_penalty[newirq] && + can_request_irq(i, IRQF_SHARED)) newirq = i; } } @@ -949,12 +985,13 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) irq = pirq & 0xf; DBG(" -> hardcoded IRQ %d\n", irq); msg = "Hardcoded"; - } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ - ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) { + } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ + ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { DBG(" -> got IRQ %d\n", irq); msg = "Found"; eisa_set_level_irq(irq); - } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { + } else if (newirq && r->set && + (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { DBG(" -> assigning IRQ %d", newirq); if (r->set(pirq_router_dev, dev, pirq, newirq)) { eisa_set_level_irq(newirq); @@ -972,7 +1009,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) } else return 0; } - printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev)); + printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, + pci_name(dev)); /* Update IRQ for all devices with the same pirq value */ while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { @@ -984,20 +1022,26 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!info) continue; if (info->irq[pin].link == pirq) { - /* We refuse to override the dev->irq information. Give a warning! */ - if ( dev2->irq && dev2->irq != irq && \ + /* + * We refuse to override the dev->irq + * information. Give a warning! + */ + if (dev2->irq && dev2->irq != irq && \ (!(pci_probe & PCI_USE_PIRQ_MASK) || \ - ((1 << dev2->irq) & mask)) ) { + ((1 << dev2->irq) & mask))) { #ifndef CONFIG_PCI_MSI - printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", - pci_name(dev2), dev2->irq, irq); + printk(KERN_INFO + "IRQ routing conflict for %s, have irq %d, want irq %d\n", + pci_name(dev2), dev2->irq, irq); #endif - continue; - } + continue; + } dev2->irq = irq; pirq_penalty[irq]++; if (dev != dev2) - printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2)); + printk(KERN_INFO + "PCI: Sharing IRQ %d with %s\n", + irq, pci_name(dev2)); } } return 1; @@ -1011,15 +1055,21 @@ static void __init pcibios_fixup_irqs(void) DBG(KERN_DEBUG "PCI: IRQ fixup\n"); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { /* - * If the BIOS has set an out of range IRQ number, just ignore it. - * Also keep track of which IRQ's are already in use. + * If the BIOS has set an out of range IRQ number, just + * ignore it. Also keep track of which IRQ's are + * already in use. */ if (dev->irq >= 16) { - DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq); + DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", + pci_name(dev), dev->irq); dev->irq = 0; } - /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */ - if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000) + /* + * If the IRQ is already assigned to a PCI device, + * ignore its ISA use penalty + */ + if (pirq_penalty[dev->irq] >= 100 && + pirq_penalty[dev->irq] < 100000) pirq_penalty[dev->irq] = 0; pirq_penalty[dev->irq]++; } @@ -1031,31 +1081,40 @@ static void __init pcibios_fixup_irqs(void) /* * Recalculate IRQ numbers if we use the I/O APIC. */ - if (io_apic_assign_pci_irqs) - { + if (io_apic_assign_pci_irqs) { int irq; if (pin) { - pin--; /* interrupt pins are numbered starting from 1 */ - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + /* + * interrupt pins are numbered starting + * from 1 + */ + pin--; + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), pin); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, * parent slot, and pin number. The SMP code detects such bridged * busses itself so we should get into this branch reliably. */ - if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + if (irq < 0 && dev->bus->parent) { + /* go back to the bridge */ + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin); + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + PCI_SLOT(bridge->devfn), + pin); if (irq >= 0) - printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", - pci_name(bridge), 'A' + pin, irq); + printk(KERN_WARNING + "PCI: using PPB %s[%c] to get irq %d\n", + pci_name(bridge), + 'A' + pin, irq); } if (irq >= 0) { - printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", + printk(KERN_INFO + "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", pci_name(dev), 'A' + pin, irq); dev->irq = irq; } @@ -1078,7 +1137,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d) { if (!broken_hp_bios_irq9) { broken_hp_bios_irq9 = 1; - printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident); + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", + d->ident); } return 0; } @@ -1091,7 +1151,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d) { if (!acer_tm360_irqrouting) { acer_tm360_irqrouting = 1; - printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident); + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", + d->ident); } return 0; } @@ -1103,7 +1164,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), - DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"), + DMI_MATCH(DMI_PRODUCT_VERSION, + "HP Pavilion Notebook Model GE"), DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), }, }, @@ -1138,11 +1200,14 @@ static int __init pcibios_irq_init(void) pirq_find_router(&pirq_router); if (pirq_table->exclusive_irqs) { int i; - for (i=0; i<16; i++) + for (i = 0; i < 16; i++) if (!(pirq_table->exclusive_irqs & (1 << i))) pirq_penalty[i] += 100; } - /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */ + /* + * If we're using the I/O APIC, avoid using the PCI IRQ + * routing table + */ if (io_apic_assign_pci_irqs) pirq_table = NULL; } @@ -1189,33 +1254,40 @@ static int pirq_enable_irq(struct pci_dev *dev) if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { char *msg = ""; - pin--; /* interrupt pins are numbered starting from 1 */ + pin--; /* interrupt pins are numbered starting from 1 */ if (io_apic_assign_pci_irqs) { int irq; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), pin); /* - * Busses behind bridges are typically not listed in the MP-table. - * In this case we have to look up the IRQ based on the parent bus, - * parent slot, and pin number. The SMP code detects such bridged - * busses itself so we should get into this branch reliably. + * Busses behind bridges are typically not + * listed in the MP-table. In this case we have + * to look up the IRQ based on the parent bus, + * parent slot, and pin number. The SMP code + * detects such bridged busses itself so we + * should get into this branch reliably. */ temp_dev = dev; - while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + while (irq < 0 && dev->bus->parent) { + /* go back to the bridge */ + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) - printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", - pci_name(bridge), 'A' + pin, irq); + printk(KERN_WARNING + "PCI: using PPB %s[%c] to get irq %d\n", + pci_name(bridge), + 'A' + pin, irq); dev = bridge; } dev = temp_dev; if (irq >= 0) { - printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", + printk(KERN_INFO + "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", pci_name(dev), 'A' + pin, irq); dev->irq = irq; return 0; @@ -1226,12 +1298,17 @@ static int pirq_enable_irq(struct pci_dev *dev) else msg = " Please try using pci=biosirq."; - /* With IDE legacy devices the IRQ lookup failure is not a problem.. */ - if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5)) + /* + * With IDE legacy devices the IRQ lookup failure is not + * a problem.. + */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && + !(dev->class & 0x5)) return 0; - printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", - 'A' + pin, pci_name(dev), msg); + printk(KERN_WARNING + "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", + 'A' + pin, pci_name(dev), msg); } return 0; }