From: William Lee Irwin III Date: Wed, 29 Jun 2005 03:45:31 +0000 (-0700) Subject: [PATCH] sparc32: Kconfig fixups X-Git-Tag: v2.6.13-rc1~4 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2668fb91cbfbd5e6799017a3579f20309aac758b;p=linux-2.6 [PATCH] sparc32: Kconfig fixups Something reverted most of the arch/sparc/Kconfig changes, leaving arch/sparc/ unconfigurable. This patch re-removes the parts made redundant by drivers/Kconfig in addition to a mysterious, spurious second instance of source "mm/Kconfig". cvs strikes again? Signed-off-by: William Irwin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 262e13d086..7a117ef473 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -270,66 +270,10 @@ endmenu source "drivers/Kconfig" -config PRINTER - tristate "Parallel printer support" - depends on PARPORT - ---help--- - If you intend to attach a printer to the parallel port of your Linux - box (as opposed to using a serial printer; if the connector at the - printer has 9 or 25 holes ["female"], then it's serial), say Y. - Also read the Printing-HOWTO, available from - . - - It is possible to share one parallel port among several devices - (e.g. printer and ZIP drive) and it is safe to compile the - corresponding drivers into the kernel. If you want to compile this - driver as a module however, choose M here and read - . The module will be called lp. - - If you have several parallel ports, you can specify which ports to - use with the "lp" kernel command line option. (Try "man bootparam" - or see the documentation of your boot loader (silo) about how to pass - options to the kernel at boot time.) The syntax of the "lp" command - line option can be found in . - - If you have more than 8 printers, you need to increase the LP_NO - macro in lp.c and the PARPORT_MAX macro in parport.h. - -source "mm/Kconfig" - -endmenu - -source "drivers/base/Kconfig" - -source "drivers/video/Kconfig" - -source "drivers/mtd/Kconfig" - -source "drivers/serial/Kconfig" - if !SUN4 source "drivers/sbus/char/Kconfig" endif -source "drivers/block/Kconfig" - -# Don't frighten a common SBus user -if PCI - -source "drivers/ide/Kconfig" - -endif - -source "drivers/isdn/Kconfig" - -source "drivers/scsi/Kconfig" - -source "drivers/fc4/Kconfig" - -source "drivers/md/Kconfig" - -source "net/Kconfig" - # This one must be before the filesystem configs. -DaveM menu "Unix98 PTY support"