From: John W. Linville Date: Mon, 21 Jan 2008 20:36:05 +0000 (-0500) Subject: ath5k: reset key cache after resume X-Git-Tag: v2.6.25-rc1~1162^2~55 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=247ae4492065ed73bf5f287e38cd4c54ce192b27;p=linux-2.6 ath5k: reset key cache after resume Otherwise it may be impossible to connected to an open network after a resume. This is a modified version of an original patch by Alex Eskin : https://bugzilla.redhat.com/show_bug.cgi?id=425950#c8 Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 75e5970c07..5ff115da91 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -604,7 +604,8 @@ ath5k_pci_resume(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath5k_softc *sc = hw->priv; - int err; + struct ath5k_hw *ah = sc->ah; + int i, err; err = pci_set_power_state(pdev, PCI_D0); if (err) @@ -624,10 +625,20 @@ ath5k_pci_resume(struct pci_dev *pdev) ath5k_init(sc); if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); - ath5k_hw_set_gpio(sc->ah, sc->led_pin, 0); + ath5k_hw_set_gpio_output(ah, sc->led_pin); + ath5k_hw_set_gpio(ah, sc->led_pin, 0); } + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up or resume. + * + * FIXME: This may need to be revisited when mac80211 becomes + * aware of suspend/resume. + */ + for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) + ath5k_hw_reset_key(ah, i); + return 0; } #endif /* CONFIG_PM */