From: Atsushi Nemoto Date: Thu, 24 Apr 2008 14:51:29 +0000 (+0900) Subject: [MTD] [NAND] at91_nand: control NCE signal X-Git-Tag: v2.6.26-rc1~1069^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2314488e81b6f8966d3ea607c4517a64bf58f283;p=linux-2.6 [MTD] [NAND] at91_nand: control NCE signal This driver did not control NCE signal during normal operations (only enable NCE on probing and disable NCE on removing). This patch make NCE signal inactive on idle state. Signed-off-by: Atsushi Nemoto Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c index 09ebcc93ed..414ceaecdb 100644 --- a/drivers/mtd/nand/at91_nand.c +++ b/drivers/mtd/nand/at91_nand.c @@ -101,6 +101,12 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) struct nand_chip *nand_chip = mtd->priv; struct at91_nand_host *host = nand_chip->priv; + if (host->board->enable_pin && (ctrl & NAND_CTRL_CHANGE)) { + if (ctrl & NAND_NCE) + at91_set_gpio_value(host->board->enable_pin, 0); + else + at91_set_gpio_value(host->board->enable_pin, 1); + } if (cmd == NAND_CMD_NONE) return;