From: Andrew Victor Date: Wed, 23 Jan 2008 08:21:02 +0000 (+0100) Subject: [ARM] 4755/1: [AT91] NAND update X-Git-Tag: v2.6.25-rc1~1175^2~2^2~10 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=228235584f0dc1ab7f33f53d6cea8ee8a4d7f0da;p=linux-2.6 [ARM] 4755/1: [AT91] NAND update Map the complete memory region (SZ_256M) as is done on the other AT91 processors. The SMC_SMARTMEDIA bit should be set in the EBI controller to enable the hardware NAND logic. (Patch from Sascha Erlacher) Signed-off-by: Andrew Victor Signed-off-by: Russell King --- diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index cebea41687..a2647265c2 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -376,7 +376,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 2e3db137bc..8acd62b75c 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -290,7 +290,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; @@ -313,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 266ccf01be..ba84ba6f18 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -233,7 +233,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index f83ef62f23..c025f5c5ff 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -383,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)