From: Andrew Victor <andrew@sanpeople.com>
Date: Wed, 5 Jul 2006 13:31:13 +0000 (+0100)
Subject: [ARM] 3710/1: AT91 Serial: Use GPIO API
X-Git-Tag: v2.6.18-rc1~5^2~2
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=20e652761cbf6983fd067aef2f0242c262057737;p=linux-2.6

[ARM] 3710/1: AT91 Serial: Use GPIO API

Patch from Andrew Victor

The AT91RM9200 errata work-around should be using the GPIO API and not
accessing the PIO registers directly.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index a7d664383d..54c6b2adf7 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -41,6 +41,7 @@
 #include <asm/mach/serial_at91.h>
 #include <asm/arch/board.h>
 #include <asm/arch/system.h>
+#include <asm/arch/gpio.h>
 
 #if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -140,9 +141,9 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
 		 */
 		if (port->mapbase == AT91_BASE_US0) {
 			if (mctrl & TIOCM_RTS)
-				at91_sys_write(AT91_PIOA + PIO_CODR, AT91_PA21_RTS0);
+				at91_set_gpio_value(AT91_PIN_PA21, 0);
 			else
-				at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0);
+				at91_set_gpio_value(AT91_PIN_PA21, 1);
 		}
 	}