From: Henrique de Moraes Holschuh Date: Fri, 24 Nov 2006 13:47:12 +0000 (-0200) Subject: ACPI: ibm-acpi: fix and extend fan enable X-Git-Tag: v2.6.20-rc2~6^2~11^2~9 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1c6a334e9c028c2b72c5350650cb14e6d5fdc232;p=linux-2.6 ACPI: ibm-acpi: fix and extend fan enable This patch fix fan enable to attempt to do the right thing and not slow down the fan if it is forced to the maximum speed. It also extends fan enable to work on older thinkpads. ABI changes: 1. Support enable/disable for all level-based write access modes Signed-off-by: Henrique de Moraes Holschuh --- diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index b6ad2ed5fd..ecb5ece79a 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -1820,7 +1820,8 @@ static int fan_init(void) if (sfan_handle) { /* 570, 770x-JL */ fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN; - fan_control_commands |= IBMACPI_FAN_CMD_LEVEL; + fan_control_commands |= + IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE; } else { if (!gfan_handle) { /* gfan without sfan means no fan control */ @@ -1980,10 +1981,34 @@ static int fan_set_level(int level) static int fan_set_enable(void) { + u8 s; + int rc; + switch (fan_control_access_mode) { case IBMACPI_FAN_WR_ACPI_FANS: case IBMACPI_FAN_WR_TPEC: - if (!acpi_ec_write(fan_status_offset, 0x80)) + if ((rc = fan_get_status(&s)) < 0) + return rc; + + /* Don't go out of emergency fan mode */ + if (s != 7) + s = IBMACPI_FAN_EC_AUTO; + + if (!acpi_ec_write(fan_status_offset, s)) + return -EIO; + break; + + case IBMACPI_FAN_WR_ACPI_SFAN: + if ((rc = fan_get_status(&s)) < 0) + return rc; + + s &= 0x07; + + /* Set fan to at least level 4 */ + if (s < 4) + s = 4; + + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) return -EIO; break; @@ -2002,6 +2027,11 @@ static int fan_set_disable(void) return -EIO; break; + case IBMACPI_FAN_WR_ACPI_SFAN: + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00)) + return -EIO; + break; + default: return -ENXIO; }