From: Robert P. J. Day Date: Sat, 8 Mar 2008 08:00:04 +0000 (-0500) Subject: USB: Remove EXPERIMENTAL designation from USB serial/ Kconfig entries X-Git-Tag: v2.6.26-rc1~1061^2~62 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1b75dc4de94e4e11ab22e284fc0853e21d1ac07a;p=linux-2.6 USB: Remove EXPERIMENTAL designation from USB serial/ Kconfig entries Since nothing under the USB serial/ directory seems to be obviously experimental, remove the EXPERIMENTAL dependency from all of those Kconfig entries. Signed-off-by: Robert P. J. Day Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index c1e65dfd93..a769f6a5d7 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -20,8 +20,8 @@ menuconfig USB_SERIAL if USB_SERIAL config USB_SERIAL_CONSOLE - bool "USB Serial Console device support (EXPERIMENTAL)" - depends on USB_SERIAL=y && EXPERIMENTAL + bool "USB Serial Console device support" + depends on USB_SERIAL=y ---help--- If you say Y here, it will be possible to use a USB to serial converter port as the system console (the system console is the @@ -59,8 +59,8 @@ config USB_SERIAL_GENERIC properly. config USB_SERIAL_AIRCABLE - tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB AIRcable Bluetooth Dongle Driver" + depends on USB_SERIAL help Say Y here if you want to use USB AIRcable Bluetooth Dongle. @@ -77,8 +77,8 @@ config USB_SERIAL_AIRPRIME module will be called airprime. config USB_SERIAL_ARK3116 - tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB ARK Micro 3116 USB Serial Driver" + depends on USB_SERIAL help Say Y here if you want to use a ARK Micro 3116 USB to Serial device. @@ -135,7 +135,7 @@ config USB_SERIAL_DIGI_ACCELEPORT config USB_SERIAL_CP2101 tristate "USB CP2101 UART Bridge Controller" - depends on USB_SERIAL && EXPERIMENTAL + depends on USB_SERIAL help Say Y here if you want to use a CP2101/CP2102 based USB to RS232 converter. @@ -145,7 +145,7 @@ config USB_SERIAL_CP2101 config USB_SERIAL_CYPRESS_M8 tristate "USB Cypress M8 USB Serial Driver" - depends on USB_SERIAL && EXPERIMENTAL + depends on USB_SERIAL help Say Y here if you want to use a device that contains the Cypress USB to Serial microcontroller, such as the DeLorme Earthmate GPS. @@ -171,8 +171,8 @@ config USB_SERIAL_EMPEG module will be called empeg. config USB_SERIAL_FTDI_SIO - tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB FTDI Single Port Serial Driver" + depends on USB_SERIAL ---help--- Say Y here if you want to use a FTDI SIO single port USB to serial converter device. The implementation I have is called the USC-1000. @@ -218,8 +218,8 @@ config USB_SERIAL_IPAQ module will be called ipaq. config USB_SERIAL_IR - tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB IR Dongle Serial Driver" + depends on USB_SERIAL help Say Y here if you want to enable simple serial support for USB IrDA devices. This is useful if you do not want to use the full IrDA @@ -279,8 +279,8 @@ config USB_SERIAL_GARMIN module will be called garmin_gps. config USB_SERIAL_IPW - tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB IPWireless (3G UMTS TDD) Driver" + depends on USB_SERIAL help Say Y here if you want to use a IPWireless USB modem such as the ones supplied by Axity3G/Sentech South Africa. @@ -289,8 +289,8 @@ config USB_SERIAL_IPW module will be called ipw. config USB_SERIAL_IUU - tristate "USB Infinity USB Unlimited Phoenix Driver (Experimental)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB Infinity USB Unlimited Phoenix Driver" + depends on USB_SERIAL help Say Y here if you want to use a IUU in phoenix mode and get an extra ttyUSBx device. More information available on @@ -405,8 +405,8 @@ config USB_SERIAL_KEYSPAN_USA49WLC Say Y here to include firmware for the USA-49WLC converter. config USB_SERIAL_KLSI - tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB KL5KUSB105 (Palmconnect) Driver" + depends on USB_SERIAL ---help--- Say Y here if you want to use a KL5KUSB105 - based single port serial adapter. The most widely known -- and currently the only @@ -494,7 +494,7 @@ config USB_SERIAL_PL2303 module will be called pl2303. config USB_SERIAL_OTI6858 - tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller (EXPERIMENTAL)" + tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" depends on USB_SERIAL help Say Y here if you want to use the OTi-6858 single port USB to serial @@ -513,8 +513,8 @@ config USB_SERIAL_HP4X module will be called hp4x. config USB_SERIAL_SAFE - tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB Safe Serial (Encapsulated) Driver" + depends on USB_SERIAL config USB_SERIAL_SAFE_PADDED bool "USB Secure Encapsulated Driver - Padded" @@ -542,8 +542,8 @@ config USB_SERIAL_TI module will be called ti_usb_3410_5052. config USB_SERIAL_CYBERJACK - tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" + depends on USB_SERIAL ---help--- Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard reader. This is an interface to ISO 7816 compatible contact-based @@ -586,8 +586,8 @@ config USB_SERIAL_OPTION it might be accessible via the FTDI_SIO driver. config USB_SERIAL_OMNINET - tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" - depends on USB_SERIAL && EXPERIMENTAL + tristate "USB ZyXEL omni.net LCD Plus Driver" + depends on USB_SERIAL help Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.