From: Larry Finger Date: Fri, 14 Dec 2007 12:59:11 +0000 (+0100) Subject: b43: Fix rfkill radio LED X-Git-Tag: v2.6.24-rc6~22^2^2~1 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1a8d122782bdabe4475f29d022c9a0c092ac9878;p=linux-2.6 b43: Fix rfkill radio LED This fixes Bug #9414 Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above. Signed-off-by: Larry Finger Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 19e588582c..6c0e2b9f77 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -163,6 +163,9 @@ static void b43_map_led(struct b43_wldev *dev, b43_register_led(dev, &dev->led_radio, name, b43_rfkill_led_name(dev), led_index, activelow); + /* Sync the RF-kill LED state with the switch state. */ + if (dev->radio_hw_enable) + b43_led_turn_on(dev, led_index, activelow); break; case B43_LED_WEIRD: case B43_LED_ASSOC: @@ -232,4 +235,5 @@ void b43_leds_exit(struct b43_wldev *dev) b43_unregister_led(&dev->led_tx); b43_unregister_led(&dev->led_rx); b43_unregister_led(&dev->led_assoc); + b43_unregister_led(&dev->led_radio); } diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b45eecc53c..1c93b4f4bf 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2163,7 +2163,6 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) static void b43_chip_exit(struct b43_wldev *dev) { b43_radio_turn_off(dev, 1); - b43_leds_exit(dev); b43_gpio_cleanup(dev); /* firmware is released later */ } @@ -2191,11 +2190,10 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_gpio_init(dev); if (err) goto out; /* firmware is released later */ - b43_leds_init(dev); err = b43_upload_initvals(dev); if (err) - goto err_leds_exit; + goto err_gpio_clean; b43_radio_turn_on(dev); b43_write16(dev, 0x03E6, 0x0000); @@ -2271,8 +2269,7 @@ out: err_radio_off: b43_radio_turn_off(dev, 1); -err_leds_exit: - b43_leds_exit(dev); +err_gpio_clean: b43_gpio_cleanup(dev); return err; } @@ -3273,10 +3270,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) return; b43_set_status(dev, B43_STAT_UNINIT); - mutex_unlock(&dev->wl->mutex); - b43_rfkill_exit(dev); - mutex_lock(&dev->wl->mutex); - + b43_leds_exit(dev); b43_rng_exit(dev->wl); b43_pio_free(dev); b43_dma_free(dev); @@ -3405,12 +3399,12 @@ static int b43_wireless_core_init(struct b43_wldev *dev) memset(wl->mac_addr, 0, ETH_ALEN); b43_upload_card_macaddress(dev); b43_security_init(dev); - b43_rfkill_init(dev); b43_rng_init(wl); b43_set_status(dev, B43_STAT_INITIALIZED); - out: + b43_leds_init(dev); +out: return err; err_chip_exit: @@ -3499,6 +3493,10 @@ static int b43_start(struct ieee80211_hw *hw) int did_init = 0; int err = 0; + /* First register RFkill. + * LEDs that are registered later depend on it. */ + b43_rfkill_init(dev); + mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { @@ -3528,6 +3526,8 @@ static void b43_stop(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; + b43_rfkill_exit(dev); + mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) b43_wireless_core_stop(dev); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 9b1f905ffb..98cf70c5fd 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -25,6 +25,8 @@ #include "rfkill.h" #include "b43.h" +#include + /* Returns TRUE, if the radio is enabled in hardware. */ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) @@ -50,7 +52,10 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) bool report_change = 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { + mutex_unlock(&wl->mutex); + return; + } enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; @@ -60,8 +65,12 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) } mutex_unlock(&wl->mutex); - if (unlikely(report_change)) - input_report_key(poll_dev->input, KEY_WLAN, enabled); + /* send the radio switch event to the system - note both a key press + * and a release are required */ + if (unlikely(report_change)) { + input_report_key(poll_dev->input, KEY_WLAN, 1); + input_report_key(poll_dev->input, KEY_WLAN, 0); + } } /* Called when the RFKILL toggled in software. */ @@ -69,13 +78,15 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; - int err = 0; + int err = -EBUSY; if (!wl->rfkill.registered) return 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (b43_status(dev) < B43_STAT_INITIALIZED) + goto out_unlock; + err = 0; switch (state) { case RFKILL_STATE_ON: if (!dev->radio_hw_enable) { @@ -133,9 +144,25 @@ void b43_rfkill_init(struct b43_wldev *dev) rfk->poll_dev->poll = b43_rfkill_poll; rfk->poll_dev->poll_interval = 1000; /* msecs */ + rfk->poll_dev->input->name = rfk->name; + rfk->poll_dev->input->id.bustype = BUS_HOST; + rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; + rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + err = rfkill_register(rfk->rfkill); if (err) goto err_free_polldev; + +#ifdef CONFIG_RFKILL_INPUT_MODULE + /* B43 RF-kill isn't useful without the rfkill-input subsystem. + * Try to load the module. */ + err = request_module("rfkill-input"); + if (err) + b43warn(wl, "Failed to load the rfkill-input module. " + "The built-in radio LED will not work.\n"); +#endif /* CONFIG_RFKILL_INPUT */ + err = input_register_polled_device(rfk->poll_dev); if (err) goto err_unreg_rfk;