From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Fri, 8 Aug 2008 23:51:26 +0000 (-0700)
Subject: igb: remove 82576 quad adapter
X-Git-Tag: v2.6.27-rc5~8^2~4^2~15
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=17fc7004a3f552b52274b6b2fbbebd7ff76dc1d5;p=linux-2.6

igb: remove 82576 quad adapter

Disable support for device 8086:10E8.  Currently the result of loading the
driver with the device present causes system instability.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index bb823acc74..f5e2e7235f 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -87,7 +87,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	case E1000_DEV_ID_82576:
 	case E1000_DEV_ID_82576_FIBER:
 	case E1000_DEV_ID_82576_SERDES:
-	case E1000_DEV_ID_82576_QUAD_COPPER:
 		mac->type = e1000_82576;
 		break;
 	default:
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index a65ccc3095..99504a600a 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -41,7 +41,6 @@ struct e1000_hw;
 #define E1000_DEV_ID_82576                    0x10C9
 #define E1000_DEV_ID_82576_FIBER              0x10E6
 #define E1000_DEV_ID_82576_SERDES             0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
 #define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 3eb78a66f8..58906c984b 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1750,15 +1750,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
 		/* return success for non excluded adapter ports */
 		retval = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* quad port adapters only support WoL on port A */
-		if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
-			wol->supported = 0;
-			break;
-		}
-		/* return success for non excluded adapter ports */
-		retval = 0;
-		break;
 	default:
 		/* dual port cards only support WoL on port A from now on
 		 * unless it was enabled in the eeprom for port B
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e6eb13a303..634c4c9d87 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
@@ -1217,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
 			adapter->eeprom_wol = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* if quad port adapter, disable WoL on all but port A */
-		if (global_quad_port_a != 0)
-			adapter->eeprom_wol = 0;
-		else
-			adapter->flags |= IGB_FLAG_QUAD_PORT_A;
-		/* Reset for multiple quad port adapters */
-		if (++global_quad_port_a == 4)
-			global_quad_port_a = 0;
-		break;
 	}
 
 	/* initialize the wol settings based on the eeprom settings */