From: Devin Heitmueller Date: Sun, 8 Jun 2008 13:22:03 +0000 (-0300) Subject: V4L/DVB (8006): em28xx: Split HVR900 into two separate entries X-Git-Tag: v2.6.27-rc1~966^2~240 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=17d9d558e818530cc7d210ffea575a36f48eaa1a;p=linux-2.6 V4L/DVB (8006): em28xx: Split HVR900 into two separate entries - Separate the newer variant of the HVR-900 into its own device profile because it has a Micronas DRX397 instead of the Zarlink demod. This doesn't make the device work, but at least we don't try to initialize it as though it had the Zarlink device. Signed-off-by: Devin Heitmueller [mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet] Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 5d9d366038..c7e23942c1 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -8,7 +8,7 @@ 7 -> Leadtek Winfast USB II (em2800) 8 -> Kworld USB2800 (em2800) 9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a] - 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500,2040:6502] + 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] @@ -16,3 +16,4 @@ 15 -> V-Gear PocketTV (em2800) 16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513,2040:6517,2040:651b,2040:651f] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] + 18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c22c90301d..938c51e1c8 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -173,6 +173,27 @@ struct em28xx_board em28xx_boards[] = { .amux = 1, } }, }, + [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { + .name = "Hauppauge WinTV HVR 900 (R2)", + .vchannels = 3, + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_XC2028, + .mts_firmware = 1, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = 0, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = 1, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = 1, + } }, + }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = { .name = "Hauppauge WinTV HVR 950", .vchannels = 3, @@ -445,7 +466,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, { USB_DEVICE(0x2040, 0x6502), - .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ @@ -567,6 +588,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) switch (dev->model) { case EM2880_BOARD_TERRATEC_PRODIGY_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: @@ -602,6 +624,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: ctl->demod = XC3028_FE_ZARLINK456; break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: + /* djh - Not sure which demod we need here */ + ctl->demod = XC3028_FE_DEFAULT; + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: /* FIXME: Better to specify the needed IF */ @@ -781,6 +807,7 @@ void em28xx_card_setup(struct em28xx *dev) switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: { struct tveeprom tv; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 9327d78fcf..cc61cfb23a 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -27,6 +27,9 @@ #include "lgdt330x.h" #include "zl10353.h" +#ifdef EM28XX_DRX397XD_SUPPORT +#include "drx397xD.h" +#endif MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab "); @@ -228,6 +231,13 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = { .if2 = 45600, }; +#ifdef EM28XX_DRX397XD_SUPPORT +/* [TODO] djh - not sure yet what the device config needs to contain */ +static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { + .demod_address = (0xe0 >> 1), +}; +#endif + /* ------------------------------------------------------------------ */ static int attach_xc3028(u8 addr, struct em28xx *dev) @@ -418,6 +428,19 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: +#ifdef EM28XX_DRX397XD_SUPPORT + /* We don't have the config structure properly populated, so + this is commented out for now */ + dvb->frontend = dvb_attach(drx397xD_attach, + &em28xx_drx397xD_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; +#endif default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n", diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index c3b5f460b2..cff618b2d1 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -56,6 +56,7 @@ #define EM2800_BOARD_VGEAR_POCKETTV 15 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17 +#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4