From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 18:33:38 +0000 (+0200) Subject: cmd640: convert to use ide_timing_find_mode() X-Git-Tag: v2.6.27-rc1~1049^2~60 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=17b500de0ad79a306a0cd8acfe9a9f086ad28b4c;p=linux-2.6 cmd640: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cadce92047..e072bdea90 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -329,6 +329,7 @@ config BLK_DEV_PLATFORM config BLK_DEV_CMD640 tristate "CMD640 chipset bugfix/support" depends on X86 + select IDE_TIMINGS ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and Pentium motherboards, usually in combination with a "Neptune" or diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index cd1ba14984..baa26a2670 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -521,6 +521,7 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index) static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, u8 pio_mode, unsigned int cycle_time) { + struct ide_timing *t; int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; int bus_speed; @@ -532,8 +533,11 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, if (pio_mode > 5) pio_mode = 5; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; + + t = ide_timing_find_mode(XFER_PIO_0 + pio_mode); + setup_time = t->setup; + active_time = t->active; + recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; cycle_count = DIV_ROUND_UP(cycle_time, clock_time);