From: Bjorn Helgaas Date: Wed, 27 Jun 2007 21:09:52 +0000 (-0700) Subject: PNP SMCf010 quirk: auto-config device if BIOS left it broken X-Git-Tag: v2.6.22-rc7~31 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=172d0496cd22c98ee2e4238821fa309c01685f3a;p=linux-2.6 PNP SMCf010 quirk: auto-config device if BIOS left it broken Some HP firmware leaves the SMCf010 IRDA device incompletely configured, or reports the wrong resources in _CRS. As a workaround, when we find such a device, try to auto-configure the device. This ignores the _CRS data, picks a config from _PRS, and runs _SRS to configure the device. This makes smsc-ircc2 work correctly with PNP resources (with no preconfiguration!) on all the machines I tested. I think Windows does something like this by default for all devices, so we should consider doing the same thing in Linux. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nc6000, nc6220, nw8000, nw8240, and possibly other machines. Signed-off-by: Bjorn Helgaas Cc: Samuel Ortiz Cc: "Linus Walleij (LD/EAB)" Cc: Andrey Borzenkov Cc: Michal Piotrowski Cc: Adam Belay Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 277df50c89..967a8e22b2 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -107,31 +107,61 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) return; } -static void quirk_smc_enable(struct pnp_dev *dev) +static int quirk_smc_fir_enabled(struct pnp_dev *dev) { - unsigned int firbase; + unsigned long firbase; + u8 bank, high, low, chip; + + if (!pnp_port_valid(dev, 1)) + return 0; + + firbase = pnp_port_start(dev, 1); + + /* Select register bank 3 */ + bank = inb(firbase + 7); + bank &= 0xf0; + bank |= 3; + outb(bank, firbase + 7); + + high = inb(firbase + 0); + low = inb(firbase + 1); + chip = inb(firbase + 2); + + /* This corresponds to the check in smsc_ircc_present() */ + if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2)) + return 1; + + return 0; +} - if (!dev->active || !pnp_port_valid(dev, 1)) +static void quirk_smc_enable(struct pnp_dev *dev) +{ + /* + * If the BIOS left the device disabled, or it is enabled and + * responding correctly, we're in good shape. + */ + if (!dev->active || quirk_smc_fir_enabled(dev)) return; /* - * On the HP/Compaq nw8240 (and probably other similar machines), - * there is an SMCF010 device with two I/O port regions: - * - * 0x3e8-0x3ef SIR - * 0x100-0x10f FIR + * Sometimes the BIOS claims the device is enabled, but it reports + * the wrong FIR resources or doesn't properly configure ISA or LPC + * bridges on the way to the device. * - * _STA reports the device is enabled, but in fact, the BIOS - * neglects to enable the FIR range. Fortunately, it does fully - * enable the device if we call _SRS. + * HP nc6000 and nc8000/nw8000 laptops have known problems like + * this. Fortunately, they do fix things up if we auto-configure + * the device using its _PRS and _SRS methods. */ - firbase = pnp_port_start(dev, 1); - if (inb(firbase + 0x7 /* IRCC_MASTER */) == 0xff) { - pnp_err("%s (%s) enabled but not responding, disabling and " - "re-enabling", dev->dev.bus_id, pnp_dev_name(dev)); - pnp_disable_dev(dev); - pnp_activate_dev(dev); - } + dev_err(&dev->dev, "%s device not responding, auto-configuring " + "resources\n", dev->id->id); + + pnp_disable_dev(dev); + pnp_init_resource_table(&dev->res); + pnp_auto_config_dev(dev); + pnp_activate_dev(dev); + + if (!quirk_smc_fir_enabled(dev)) + dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n"); }