From: Kurt Garloff Date: Mon, 3 Apr 2006 13:20:08 +0000 (+0200) Subject: [SCSI] BLIST_ATTACH_PQ3 flags X-Git-Tag: v2.6.18-rc1~1092^2~84 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=13f7e5acc8b329080672c13f05f252ace5b79825;p=linux-2.6 [SCSI] BLIST_ATTACH_PQ3 flags Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This is patch 3/3: 3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi scanning code register PQ3 devices and continues scanning; only sg will attach thanks to scsi_bus_match(). Signed-off-by: Kurt Garloff Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 84c3937ae8..6f46b338c9 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -155,6 +155,8 @@ static struct { {"HITACHI", "DF400", "*", BLIST_SPARSELUN}, {"HITACHI", "DF500", "*", BLIST_SPARSELUN}, {"HITACHI", "DF600", "*", BLIST_SPARSELUN}, + {"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN}, + {"HITACHI", "OPEN-E", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN}, {"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP VA7400 */ {"HP", "OPEN-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP XP Arrays */ {"HP", "NetRAID-4M", NULL, BLIST_FORCELUN}, diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 5603dc6eca..7d31a4b0f8 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -900,7 +900,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, /* * result contains valid SCSI INQUIRY data. */ - if ((result[0] >> 5) == 3) { + if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) { /* * For a Peripheral qualifier 3 (011b), the SCSI * spec says: The device server is not capable of diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h index 174101b206..5999668982 100644 --- a/include/scsi/scsi_devinfo.h +++ b/include/scsi/scsi_devinfo.h @@ -28,4 +28,5 @@ #define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ #define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ #define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ +#define BLIST_ATTACH_PQ3 0x800000 /* Scan: Attach to PQ3 devices */ #endif