From: Kristen Carlson Accardi Date: Thu, 28 Sep 2006 18:29:01 +0000 (-0700) Subject: [PATCH] libata: ACPI and _GTF support X-Git-Tag: v2.6.21-rc1~73^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=11ef697b37e3c85ce1ac21f7711babf1f5b12784;p=linux-2.6 [PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit) --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index abd575cfc7..5bc8970b83 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -48,6 +48,7 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. + LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. M68k M68k architecture is enabled. @@ -1038,6 +1039,10 @@ and is between 256 and 4096 characters. It is defined in the file emulation library even if a 387 maths coprocessor is present. + noacpi [LIBATA] Disables use of ACPI in libata suspend/resume + when set. + Format: + noaliencache [MM, NUMA] Disables the allcoation of alien caches in the slab allocator. Saves per-node memory, but will impact performance on real NUMA hardware. diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 3747457fee..4af0a4bb57 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -161,6 +161,19 @@ config SATA_INTEL_COMBINED depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) default y +config SATA_ACPI + bool + depends on ACPI && PCI + default y + help + This option adds support for SATA-related ACPI objects. + These ACPI objects add the ability to retrieve taskfiles + from the ACPI BIOS and write them to the disk controller. + These objects may be related to performance, security, + power management, or other areas. + You can disable this at kernel boot time by using the + option libata.noacpi=1 + config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index cd096f0c78..74298afbba 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -66,4 +66,4 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o - +libata-$(CONFIG_SATA_ACPI) += libata-acpi.o diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c new file mode 100644 index 0000000000..7b740fe172 --- /dev/null +++ b/drivers/ata/libata-acpi.c @@ -0,0 +1,602 @@ +/* + * libata-acpi.c + * Provides ACPI support for PATA/SATA. + * + * Copyright (C) 2006 Intel Corp. + * Copyright (C) 2006 Randy Dunlap + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "libata.h" + +#include +#include +#include +#include +#include +#include +#include + +#define SATA_ROOT_PORT(x) (((x) >> 16) & 0xffff) +#define SATA_PORT_NUMBER(x) ((x) & 0xffff) /* or NO_PORT_MULT */ +#define NO_PORT_MULT 0xffff +#define SATA_ADR_RSVD 0xffffffff + +#define REGS_PER_GTF 7 +struct taskfile_array { + u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ +}; + + +/** + * sata_get_dev_handle - finds acpi_handle and PCI device.function + * @dev: device to locate + * @handle: returned acpi_handle for @dev + * @pcidevfn: return PCI device.func for @dev + * + * This function is somewhat SATA-specific. Or at least the + * PATA & SATA versions of this function are different, + * so it's not entirely generic code. + * + * Returns 0 on success, <0 on error. + */ +static int sata_get_dev_handle(struct device *dev, acpi_handle *handle, + acpi_integer *pcidevfn) +{ + struct pci_dev *pci_dev; + acpi_integer addr; + + pci_dev = to_pci_dev(dev); /* NOTE: PCI-specific */ + /* Please refer to the ACPI spec for the syntax of _ADR. */ + addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); + *pcidevfn = addr; + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr); + if (!*handle) + return -ENODEV; + return 0; +} + +/** + * pata_get_dev_handle - finds acpi_handle and PCI device.function + * @dev: device to locate + * @handle: returned acpi_handle for @dev + * @pcidevfn: return PCI device.func for @dev + * + * The PATA and SATA versions of this function are different. + * + * Returns 0 on success, <0 on error. + */ +static int pata_get_dev_handle(struct device *dev, acpi_handle *handle, + acpi_integer *pcidevfn) +{ + unsigned int bus, devnum, func; + acpi_integer addr; + acpi_handle dev_handle, parent_handle; + struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER, + .pointer = NULL}; + acpi_status status; + struct acpi_device_info *dinfo = NULL; + int ret = -ENODEV; + struct pci_dev *pdev = to_pci_dev(dev); + + bus = pdev->bus->number; + devnum = PCI_SLOT(pdev->devfn); + func = PCI_FUNC(pdev->devfn); + + dev_handle = DEVICE_ACPI_HANDLE(dev); + parent_handle = DEVICE_ACPI_HANDLE(dev->parent); + + status = acpi_get_object_info(parent_handle, &buffer); + if (ACPI_FAILURE(status)) + goto err; + + dinfo = buffer.pointer; + if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && + dinfo->address == bus) { + /* ACPI spec for _ADR for PCI bus: */ + addr = (acpi_integer)(devnum << 16 | func); + *pcidevfn = addr; + *handle = dev_handle; + } else { + goto err; + } + + if (!*handle) + goto err; + ret = 0; +err: + kfree(dinfo); + return ret; +} + +struct walk_info { /* can be trimmed some */ + struct device *dev; + struct acpi_device *adev; + acpi_handle handle; + acpi_integer pcidevfn; + unsigned int drivenum; + acpi_handle obj_handle; + struct ata_port *ataport; + struct ata_device *atadev; + u32 sata_adr; + int status; + char basepath[ACPI_PATHNAME_MAX]; + int basepath_len; +}; + +static acpi_status get_devices(acpi_handle handle, + u32 level, void *context, void **return_value) +{ + acpi_status status; + struct walk_info *winfo = context; + struct acpi_buffer namebuf = {ACPI_ALLOCATE_BUFFER, NULL}; + char *pathname; + struct acpi_buffer buffer; + struct acpi_device_info *dinfo; + + status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &namebuf); + if (status) + goto ret; + pathname = namebuf.pointer; + + buffer.length = ACPI_ALLOCATE_BUFFER; + buffer.pointer = NULL; + status = acpi_get_object_info(handle, &buffer); + if (ACPI_FAILURE(status)) + goto out2; + + dinfo = buffer.pointer; + + /* find full device path name for pcidevfn */ + if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && + dinfo->address == winfo->pcidevfn) { + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + ":%s: matches pcidevfn (0x%llx)\n", + pathname, winfo->pcidevfn); + strlcpy(winfo->basepath, pathname, + sizeof(winfo->basepath)); + winfo->basepath_len = strlen(pathname); + goto out; + } + + /* if basepath is not yet known, ignore this object */ + if (!winfo->basepath_len) + goto out; + + /* if this object is in scope of basepath, maybe use it */ + if (strncmp(pathname, winfo->basepath, + winfo->basepath_len) == 0) { + if (!(dinfo->valid & ACPI_VALID_ADR)) + goto out; + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + "GOT ONE: (%s) root_port = 0x%llx," + " port_num = 0x%llx\n", pathname, + SATA_ROOT_PORT(dinfo->address), + SATA_PORT_NUMBER(dinfo->address)); + /* heuristics: */ + if (SATA_PORT_NUMBER(dinfo->address) != NO_PORT_MULT) + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, + KERN_DEBUG, "warning: don't" + " know how to handle SATA port" + " multiplier\n"); + if (SATA_ROOT_PORT(dinfo->address) == + winfo->ataport->port_no && + SATA_PORT_NUMBER(dinfo->address) == NO_PORT_MULT) { + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, + KERN_DEBUG, + "THIS ^^^^^ is the requested" + " SATA drive (handle = 0x%p)\n", + handle); + winfo->sata_adr = dinfo->address; + winfo->obj_handle = handle; + } + } +out: + kfree(dinfo); +out2: + kfree(pathname); + +ret: + return status; +} + +/* Get the SATA drive _ADR object. */ +static int get_sata_adr(struct device *dev, acpi_handle handle, + acpi_integer pcidevfn, unsigned int drive, + struct ata_port *ap, + struct ata_device *atadev, u32 *dev_adr) +{ + acpi_status status; + struct walk_info *winfo; + int err = -ENOMEM; + + winfo = kzalloc(sizeof(struct walk_info), GFP_KERNEL); + if (!winfo) + goto out; + + winfo->dev = dev; + winfo->atadev = atadev; + winfo->ataport = ap; + if (acpi_bus_get_device(handle, &winfo->adev) < 0) + if (ata_msg_probe(ap)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + "acpi_bus_get_device failed\n"); + winfo->handle = handle; + winfo->pcidevfn = pcidevfn; + winfo->drivenum = drive; + + status = acpi_get_devices(NULL, get_devices, winfo, NULL); + if (ACPI_FAILURE(status)) { + if (ata_msg_probe(ap)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + "%s: acpi_get_devices failed\n", + __FUNCTION__); + err = -ENODEV; + } else { + *dev_adr = winfo->sata_adr; + atadev->obj_handle = winfo->obj_handle; + err = 0; + } + kfree(winfo); +out: + return err; +} + +/** + * do_drive_get_GTF - get the drive bootup default taskfile settings + * @ap: the ata_port for the drive + * @ix: target ata_device (drive) index + * @gtf_length: number of bytes of _GTF data returned at @gtf_address + * @gtf_address: buffer containing _GTF taskfile arrays + * + * This applies to both PATA and SATA drives. + * + * The _GTF method has no input parameters. + * It returns a variable number of register set values (registers + * hex 1F1..1F7, taskfiles). + * The is not known in advance, so have ACPI-CA + * allocate the buffer as needed and return it, then free it later. + * + * The returned @gtf_length and @gtf_address are only valid if the + * function return value is 0. + */ +static int do_drive_get_GTF(struct ata_port *ap, int ix, + unsigned int *gtf_length, unsigned long *gtf_address, + unsigned long *obj_loc) +{ + acpi_status status; + acpi_handle dev_handle = NULL; + acpi_handle chan_handle, drive_handle; + acpi_integer pcidevfn = 0; + u32 dev_adr; + struct acpi_buffer output; + union acpi_object *out_obj; + struct device *dev = ap->host->dev; + struct ata_device *atadev = &ap->device[ix]; + int err = -ENODEV; + + *gtf_length = 0; + *gtf_address = 0UL; + *obj_loc = 0UL; + + if (noacpi) + return 0; + + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: ENTER: ap->id: %d, port#: %d\n", + __FUNCTION__, ap->id, ap->port_no); + + if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: ERR: " + "ata_dev_present: %d, PORT_DISABLED: %lu\n", + __FUNCTION__, ata_dev_enabled(atadev), + ap->flags & ATA_FLAG_DISABLED); + goto out; + } + + /* Don't continue if device has no _ADR method. + * _GTF is intended for known motherboard devices. */ + if (!(ap->cbl == ATA_CBL_SATA)) { + err = pata_get_dev_handle(dev, &dev_handle, &pcidevfn); + if (err < 0) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: pata_get_dev_handle failed (%d)\n", + __FUNCTION__, err); + goto out; + } + } else { + err = sata_get_dev_handle(dev, &dev_handle, &pcidevfn); + if (err < 0) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: sata_get_dev_handle failed (%d\n", + __FUNCTION__, err); + goto out; + } + } + + /* Get this drive's _ADR info. if not already known. */ + if (!atadev->obj_handle) { + if (!(ap->cbl == ATA_CBL_SATA)) { + /* get child objects of dev_handle == channel objects, + * + _their_ children == drive objects */ + /* channel is ap->port_no */ + chan_handle = acpi_get_child(dev_handle, + ap->port_no); + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: chan adr=%d: chan_handle=0x%p\n", + __FUNCTION__, ap->port_no, + chan_handle); + if (!chan_handle) { + err = -ENODEV; + goto out; + } + /* TBD: could also check ACPI object VALID bits */ + drive_handle = acpi_get_child(chan_handle, ix); + if (!drive_handle) { + err = -ENODEV; + goto out; + } + dev_adr = ix; + atadev->obj_handle = drive_handle; + } else { /* for SATA mode */ + dev_adr = SATA_ADR_RSVD; + err = get_sata_adr(dev, dev_handle, pcidevfn, 0, + ap, atadev, &dev_adr); + } + if (err < 0 || dev_adr == SATA_ADR_RSVD || + !atadev->obj_handle) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: get_sata/pata_adr failed: " + "err=%d, dev_adr=%u, obj_handle=0x%p\n", + __FUNCTION__, err, dev_adr, + atadev->obj_handle); + goto out; + } + } + + /* Setting up output buffer */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTF has no input parameters */ + err = -EIO; + status = acpi_evaluate_object(atadev->obj_handle, "_GTF", + NULL, &output); + if (ACPI_FAILURE(status)) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: Run _GTF error: status = 0x%x\n", + __FUNCTION__, status); + goto out; + } + + if (!output.length || !output.pointer) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: " + "length or ptr is NULL (0x%llx, 0x%p)\n", + __FUNCTION__, + (unsigned long long)output.length, + output.pointer); + kfree(output.pointer); + goto out; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + kfree(output.pointer); + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: " + "error: expected object type of " + " ACPI_TYPE_BUFFER, got 0x%x\n", + __FUNCTION__, out_obj->type); + err = -ENOENT; + goto out; + } + + if (!out_obj->buffer.length || !out_obj->buffer.pointer || + out_obj->buffer.length % REGS_PER_GTF) { + if (ata_msg_drv(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: unexpected GTF length (%d) or addr (0x%p)\n", + __FUNCTION__, out_obj->buffer.length, + out_obj->buffer.pointer); + err = -ENOENT; + goto out; + } + + *gtf_length = out_obj->buffer.length; + *gtf_address = (unsigned long)out_obj->buffer.pointer; + *obj_loc = (unsigned long)out_obj; + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: returning " + "gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n", + __FUNCTION__, *gtf_length, *gtf_address, *obj_loc); + err = 0; +out: + return err; +} + +/** + * taskfile_load_raw - send taskfile registers to host controller + * @ap: Port to which output is sent + * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * LOCKING: TBD: + * Inherited from caller. + */ +static void taskfile_load_raw(struct ata_port *ap, + struct ata_device *atadev, + const struct taskfile_array *gtf) +{ + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: " + "%02x %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, + gtf->tfa[0], gtf->tfa[1], gtf->tfa[2], + gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]); + + if ((gtf->tfa[0] == 0) && (gtf->tfa[1] == 0) && (gtf->tfa[2] == 0) + && (gtf->tfa[3] == 0) && (gtf->tfa[4] == 0) && (gtf->tfa[5] == 0) + && (gtf->tfa[6] == 0)) + return; + + if (ap->ops->qc_issue) { + struct ata_taskfile tf; + unsigned int err; + + ata_tf_init(atadev, &tf); + + /* convert gtf to tf */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ + tf.protocol = atadev->class == ATA_DEV_ATAPI ? + ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA; + tf.feature = gtf->tfa[0]; /* 0x1f1 */ + tf.nsect = gtf->tfa[1]; /* 0x1f2 */ + tf.lbal = gtf->tfa[2]; /* 0x1f3 */ + tf.lbam = gtf->tfa[3]; /* 0x1f4 */ + tf.lbah = gtf->tfa[4]; /* 0x1f5 */ + tf.device = gtf->tfa[5]; /* 0x1f6 */ + tf.command = gtf->tfa[6]; /* 0x1f7 */ + + err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0); + if (err && ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: ata_exec_internal failed: %u\n", + __FUNCTION__, err); + } else + if (ata_msg_warn(ap)) + ata_dev_printk(atadev, KERN_WARNING, + "%s: SATA driver is missing qc_issue function" + " entry points\n", + __FUNCTION__); +} + +/** + * do_drive_set_taskfiles - write the drive taskfile settings from _GTF + * @ap: the ata_port for the drive + * @atadev: target ata_device + * @gtf_length: total number of bytes of _GTF taskfiles + * @gtf_address: location of _GTF taskfile arrays + * + * This applies to both PATA and SATA drives. + * + * Write {gtf_address, length gtf_length} in groups of + * REGS_PER_GTF bytes. + */ +static int do_drive_set_taskfiles(struct ata_port *ap, + struct ata_device *atadev, unsigned int gtf_length, + unsigned long gtf_address) +{ + int err = -ENODEV; + int gtf_count = gtf_length / REGS_PER_GTF; + int ix; + struct taskfile_array *gtf; + + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: ENTER: ap->id: %d, port#: %d\n", + __FUNCTION__, ap->id, ap->port_no); + + if (noacpi || !(ap->cbl == ATA_CBL_SATA)) + return 0; + + if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) + goto out; + if (!gtf_count) /* shouldn't be here */ + goto out; + + if (gtf_length % REGS_PER_GTF) { + if (ata_msg_drv(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: unexpected GTF length (%d)\n", + __FUNCTION__, gtf_length); + goto out; + } + + for (ix = 0; ix < gtf_count; ix++) { + gtf = (struct taskfile_array *) + (gtf_address + ix * REGS_PER_GTF); + + /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */ + taskfile_load_raw(ap, atadev, gtf); + } + + err = 0; +out: + return err; +} + +/** + * ata_acpi_exec_tfs - get then write drive taskfile settings + * @ap: the ata_port for the drive + * + * This applies to both PATA and SATA drives. + */ +int ata_acpi_exec_tfs(struct ata_port *ap) +{ + int ix; + int ret =0; + unsigned int gtf_length; + unsigned long gtf_address; + unsigned long obj_loc; + + if (noacpi) + return 0; + + for (ix = 0; ix < ATA_MAX_DEVICES; ix++) { + if (!ata_dev_enabled(&ap->device[ix])) + continue; + + ret = do_drive_get_GTF(ap, ix, + >f_length, >f_address, &obj_loc); + if (ret < 0) { + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_DEBUG, + "%s: get_GTF error (%d)\n", + __FUNCTION__, ret); + break; + } + + ret = do_drive_set_taskfiles(ap, &ap->device[ix], + gtf_length, gtf_address); + kfree((void *)obj_loc); + if (ret < 0) { + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_DEBUG, + "%s: set_taskfiles error (%d)\n", + __FUNCTION__, ret); + break; + } + } + + return ret; +} + diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2cf8251728..785bf50488 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -93,6 +93,10 @@ static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); +int noacpi; +module_param(noacpi, int, 0444); +MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -1778,6 +1782,9 @@ int ata_bus_probe(struct ata_port *ap) /* reset and determine device classes */ ap->ops->phy_reset(ap); + /* retrieve and execute the ATA task file of _GTF */ + ata_acpi_exec_tfs(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 06ccf230e3..ea02903e85 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -47,6 +47,7 @@ extern struct workqueue_struct *ata_aux_wq; extern int atapi_enabled; extern int atapi_dmadir; extern int libata_fua; +extern int noacpi; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, @@ -87,6 +88,15 @@ extern void ata_port_init(struct ata_port *ap, struct ata_host *host, extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port); +/* libata-acpi.c */ +#ifdef CONFIG_SATA_ACPI +extern int ata_acpi_exec_tfs(struct ata_port *ap); +#else +static inline int ata_acpi_exec_tfs(struct ata_port *ap) +{ + return 0; +} +#endif /* libata-scsi.c */ extern struct scsi_transport_template ata_scsi_transport_template; diff --git a/include/linux/libata.h b/include/linux/libata.h index b870b20df4..86762a9f52 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -35,6 +35,7 @@ #include #include #include +#include /* * Define if arch has non-standard setup. This is a _PCI_ standard @@ -495,6 +496,10 @@ struct ata_device { /* error history */ struct ata_ering ering; unsigned int horkage; /* List of broken features */ +#ifdef CONFIG_SATA_ACPI + /* ACPI objects info */ + acpi_handle obj_handle; +#endif }; /* Offset into struct ata_device. Fields above it are maintained