From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 09:43:20 +0000 (+0200)
Subject: m68knommu: fec: remove FADS
X-Git-Tag: v2.6.27-rc1~519^2~3
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0d176af5b7e658490b75427ccd23ff6a158c472b;p=linux-2.6

m68knommu: fec: remove FADS

I found config FADS only in ppc/Kconfig. Bye bye relic.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 32a4f17d35..6abbcd5f7c 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -2,12 +2,6 @@
  * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
  * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
  *
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver.  The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
  * Right now, I am very wasteful with the buffers.  I allocate memory
  * pages and then divide them into 2K frame buffers.  This way I know I
  * have buffers large enough to hold one frame within one buffer descriptor.
@@ -1809,10 +1803,6 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
 	*/
 	*((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
 #endif
-#ifdef CONFIG_FADS
-	if (request_8xxirq(SIU_IRQ2, mii_link_interrupt, 0, "mii", dev) != 0)
-		panic("Could not allocate MII IRQ!");
-#endif
 }
 
 static void __inline__ fec_get_mac(struct net_device *dev)