From: Domen Puncer <domen.puncer@telargo.com>
Date: Sun, 6 May 2007 15:38:48 +0000 (+1000)
Subject: [POWERPC] lite5200(b) DTS fixes
X-Git-Tag: v2.6.22-rc1~358^2~31
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0d0f4bc70e19f8782996793c3905bce14a7cabd7;p=linux-2.6

[POWERPC] lite5200(b) DTS fixes

Three trivial DTS fixes:
 -Mark Lite5200(b) boards as "mpc5200" compatible. On efika the
  firmware already does that.
 -Fix mscan interrupt.
 -Fix wakeup GPIO address.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index ba54c6b40a..6e2650dbca 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -48,6 +48,7 @@
 
 	soc5200@f0000000 {
 		model = "fsl,mpc5200";
+		compatible = "mpc5200";
 		revision = ""			// from bootloader
 		#interrupt-cells = <3>;
 		device_type = "soc";
@@ -166,7 +167,7 @@
 			device_type = "mscan";
 			compatible = "mpc5200-mscan";
 			cell-index = <1>;
-			interrupts = <1 12 0>;
+			interrupts = <2 12 0>;
 			interrupt-parent = <500>;
 			reg = <980 80>;
 		};
@@ -178,7 +179,7 @@
 			interrupt-parent = <500>;
 		};
 
-		gpio-wkup@b00 {
+		gpio-wkup@c00 {
 			compatible = "mpc5200-gpio-wkup";
 			reg = <c00 40>;
 			interrupts = <1 8 0 0 3 0>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 2e003081b0..5ba8100c1b 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -48,6 +48,7 @@
 
 	soc5200@f0000000 {
 		model = "fsl,mpc5200b";
+		compatible = "mpc5200";
 		revision = "";			// from bootloader
 		#interrupt-cells = <3>;
 		device_type = "soc";
@@ -166,7 +167,7 @@
 			device_type = "mscan";
 			compatible = "mpc5200b-mscan\0mpc5200-mscan";
 			cell-index = <1>;
-			interrupts = <1 12 0>;
+			interrupts = <2 12 0>;
 			interrupt-parent = <500>;
 			reg = <980 80>;
 		};
@@ -178,7 +179,7 @@
 			interrupt-parent = <500>;
 		};
 
-		gpio-wkup@b00 {
+		gpio-wkup@c00 {
 			compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
 			reg = <c00 40>;
 			interrupts = <1 8 0 0 3 0>;