From: Pierre Ossman Date: Sun, 13 Apr 2008 14:03:38 +0000 (+0200) Subject: sdhci: improve no card, no reset quirk X-Git-Tag: v2.6.26-rc1~1112^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0b82684c3c19aff092bb303959a31dbe5c965922;p=linux-2.6 sdhci: improve no card, no reset quirk The quirk was meant to just inhibit some resets, but ended up blocking all of them. Fortunately, this was just what was needed. Change the comment to reflect reality. Also, this issue has just been observed on Samsung laptops, so reduce the number of chips the quirk affects. Signed-off-by: Pierre Ossman --- diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6250eb5f98..07c2048b23 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -41,7 +41,7 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) /* Controller has bad caps bits, but really supports DMA */ #define SDHCI_QUIRK_FORCE_DMA (1<<1) -/* Controller doesn't like some resets when there is no card inserted. */ +/* Controller doesn't like to be reset when there is no card inserted. */ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) /* Controller doesn't like clearing the power reg before a change */ #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) @@ -69,12 +69,20 @@ static const struct pci_device_id pci_ids[] __devinitdata = { { .vendor = PCI_VENDOR_ID_RICOH, .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_ANY_ID, + .subvendor = PCI_VENDOR_ID_SAMSUNG, .subdevice = PCI_ANY_ID, .driver_data = SDHCI_QUIRK_FORCE_DMA | SDHCI_QUIRK_NO_CARD_NO_RESET, }, + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_FORCE_DMA, + }, + { .vendor = PCI_VENDOR_ID_TI, .device = PCI_DEVICE_ID_TI_XX21_XX11_SD,