From: Wade Farnsworth Date: Tue, 22 Jan 2008 20:13:39 +0000 (-0700) Subject: [POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts X-Git-Tag: v2.6.25-rc1~1131^2~99^2~10 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0ac247d5690570b825088a5752817eff42488897;p=linux-2.6 [POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts Also add compatible field for the soc node, so that it will be picked up by of_platform_bus_probe(). Signed-off-by: Wade Farnsworth Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index a7191799ee..556a9cac07 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -60,10 +60,52 @@ reg = <00000000 40000000>; // 1G at 0x0 }; + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = ; + interrupts = <13 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 ff800000 00800000 + 1 0 fe000000 01000000 + 2 0 f8200000 00100000 + 3 0 f8100000 00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 00800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <00000000 00300000>; + }; + partition@300000 { + label = "firmware b"; + reg = <00300000 00100000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <00400000 00300000>; + }; + partition@700000 { + label = "firmware a"; + reg = <00700000 00100000>; + read-only; + }; + }; + }; + soc8641@f8000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <00000000 f8000000 00100000>; reg = ; // CCSRBAR bus-frequency = <0>;