From: Sylvain Munaut Date: Sun, 16 Sep 2007 10:53:26 +0000 (+1000) Subject: [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes X-Git-Tag: v2.6.24-rc1~491^2^2~5 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=07e6e93136ca61f071c819c69e1ec5bff9fda46f;p=linux-2.6 [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes On the mpc5200b the ccr register is 32 bits wide while on the mpc5200 it's only 16 bits. It's up to the driver to use the correct format depending on the chip it's running on. The 5200b also offers some more registers & status in AC97 mode. Again, if not running on a 5200b the driver should not use those. Signed-off-by: Sylvain Munaut Signed-off-by: Grant Likely --- diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h index 9d850b2b20..c82b8d49a7 100644 --- a/include/asm-ppc/mpc52xx_psc.h +++ b/include/asm-ppc/mpc52xx_psc.h @@ -28,6 +28,10 @@ #define MPC52xx_PSC_MAXNUM 6 /* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_UNEX_RX 0x0001 +#define MPC52xx_PSC_SR_DATA_VAL 0x0002 +#define MPC52xx_PSC_SR_DATA_OVR 0x0004 +#define MPC52xx_PSC_SR_CMDSEND 0x0008 #define MPC52xx_PSC_SR_CDE 0x0080 #define MPC52xx_PSC_SR_RXRDY 0x0100 #define MPC52xx_PSC_SR_RXFULL 0x0200 @@ -132,8 +136,10 @@ struct mpc52xx_psc { u8 reserved5[3]; u8 ctlr; /* PSC + 0x1c */ u8 reserved6[3]; - u16 ccr; /* PSC + 0x20 */ - u8 reserved7[14]; + u32 ccr; /* PSC + 0x20 */ + u32 ac97_slots; /* PSC + 0x24 */ + u32 ac97_cmd; /* PSC + 0x28 */ + u32 ac97_data; /* PSC + 0x2c */ u8 ivr; /* PSC + 0x30 */ u8 reserved8[3]; u8 ip; /* PSC + 0x34 */