From: Sri Deevi Date: Sat, 21 Jun 2008 14:06:44 +0000 (-0300) Subject: V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM card X-Git-Tag: v2.6.27-rc1~966^2~210 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=03c2808503b102971226007070c57410267d0b9d;p=linux-2.6 V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM card Patch provided courtesy of Conexant http://www.conexant.com. Signed-off-by: Srinivasa Deevi Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c26e0ef5b0..90857bedcc 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -27,6 +27,8 @@ #include "cx18-i2c.h" #include +#define V4L2_STD_NOT_MN (V4L2_STD_PAL|V4L2_STD_SECAM) + /********************** card configuration *******************************/ /* usual i2c tuner addresses to probe */ @@ -232,11 +234,64 @@ static const struct cx18_card cx18_card_mpc718 = { .i2c = &cx18_i2c_std, }; +/* ------------------------------------------------------------------------- */ + +/* Conexant Raptor PAL/SECAM: note that this card is analog only! */ + +static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_CONEXANT, 0x0009 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_cnxt_raptor_pal = { + .type = CX18_CARD_CNXT_RAPTOR_PAL, + .name = "Conexant Raptor PAL/SECAM", + .comment = "VBI is not yet supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_muxer = CX18_HW_GPIO, + .hw_all = CX18_HW_TUNER | CX18_HW_GPIO, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 1 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 }, + }, + .tuners = { + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + }, + .ddr = { + /* MT 46V16M16 memory */ + .chip_config = 0x50306, + .refresh = 0x753, + .timing1 = 0x33220953, + .timing2 = 0x09, + .tune_lane = 0, + .initial_emrs = 0, + }, + .gpio_init.initial_value = 0x02, + .gpio_init.direction = 0x02, + .gpio_audio_input = { .mask = 0x02, .tuner = 0x02, .linein = 0x00 }, + .pci_list = cx18_pci_cnxt_raptor_pal, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + static const struct cx18_card *cx18_card_list[] = { &cx18_card_hvr1600_esmt, &cx18_card_hvr1600_samsung, &cx18_card_h900, &cx18_card_mpc718, + &cx18_card_cnxt_raptor_pal, }; const struct cx18_card *cx18_get_card(u16 index) diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index dc2dd945d4..b5f894c0af 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -85,6 +85,13 @@ struct cx18_gpio_i2c_slave_reset { int msecs_recovery; /* time after deassert for chips to be ready */ }; +struct ivtv_gpio_audio_input { /* select tuner/line in input */ + u32 mask; /* leave to 0 if not supported */ + u32 tuner; + u32 linein; + u32 radio; +}; + struct cx18_card_tuner { v4l2_std_id std; /* standard for which the tuner is suitable */ int tuner; /* tuner ID (from tuner.h) */ @@ -123,6 +130,7 @@ struct cx18_card { u8 xceive_pin; /* XCeive tuner GPIO reset pin */ struct cx18_gpio_init gpio_init; struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset; + struct ivtv_gpio_audio_input gpio_audio_input; struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; struct cx18_card_tuner_i2c *i2c; diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index e9c7e07b9f..71bb04ab91 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -120,6 +120,7 @@ MODULE_PARM_DESC(cardtype, "\t\t\t 2 = Hauppauge HVR 1600 (Samsung memory)\n" "\t\t\t 3 = Compro VideoMate H900\n" "\t\t\t 4 = Yuan MPC718\n" + "\t\t\t 5 = Conexant Raptor PAL/SECAM\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); @@ -435,7 +436,7 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) (cx->params.video_temporal_filter_mode << 1) | (cx->params.video_median_filter_type << 2); cx->params.port = CX2341X_PORT_MEMORY; - cx->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI; + cx->params.capabilities = 0; init_waitqueue_head(&cx->cap_w); init_waitqueue_head(&cx->mb_apu_waitq); init_waitqueue_head(&cx->mb_cpu_waitq); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index de14ab59a2..b421e0268b 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -75,7 +75,8 @@ #define CX18_CARD_HVR_1600_SAMSUNG 1 /* Hauppauge HVR 1600 (Samsung memory) */ #define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */ #define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ -#define CX18_CARD_LAST 3 +#define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */ +#define CX18_CARD_LAST 4 #define CX18_ENC_STREAM_TYPE_MPG 0 #define CX18_ENC_STREAM_TYPE_TS 1 @@ -94,6 +95,7 @@ #define CX18_PCI_ID_HAUPPAUGE 0x0070 #define CX18_PCI_ID_COMPRO 0x185b #define CX18_PCI_ID_YUAN 0x12ab +#define CX18_PCI_ID_CONEXANT 0x14f1 /* ======================================================================== */ /* ========================== START USER SETTABLE DMA VARIABLES =========== */ diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index b302833f6f..089bad6d85 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -122,3 +122,37 @@ int cx18_reset_tuner_gpio(void *dev, int cmd, int value) schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; } + +int cx18_gpio(struct cx18 *cx, unsigned int command, void *arg) +{ + struct v4l2_routing *route = arg; + u32 mask, data; + + switch (command) { + case VIDIOC_INT_S_AUDIO_ROUTING: + if (route->input > 2) + return -EINVAL; + mask = cx->card->gpio_audio_input.mask; + switch (route->input) { + case 0: + data = cx->card->gpio_audio_input.tuner; + break; + case 1: + data = cx->card->gpio_audio_input.linein; + break; + case 2: + default: + data = cx->card->gpio_audio_input.radio; + break; + } + break; + + default: + return -EINVAL; + } + if (mask) { + cx->gpio_val = (cx->gpio_val & ~mask) | (data & mask); + gpio_write(cx); + } + return 0; +} diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h index 525c328f74..7447fed357 100644 --- a/drivers/media/video/cx18/cx18-gpio.h +++ b/drivers/media/video/cx18/cx18-gpio.h @@ -23,3 +23,4 @@ void cx18_gpio_init(struct cx18 *cx); void cx18_reset_i2c_slaves_gpio(struct cx18 *cx); int cx18_reset_tuner_gpio(void *dev, int cmd, int value); +int cx18_gpio(struct cx18 *cx, unsigned int command, void *arg); diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index 680bc4e35b..bca905901d 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -311,8 +311,12 @@ int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg) { int addr; - if (hw == CX18_HW_GPIO || hw == 0) + if (hw == 0) return 0; + + if (hw == CX18_HW_GPIO) + return cx18_gpio(cx, cmd, arg); + if (hw == CX18_HW_CX23418) return cx18_av_cmd(cx, cmd, arg); @@ -350,6 +354,8 @@ void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg) cx18_av_cmd(cx, cmd, arg); i2c_clients_command(&cx->i2c_adap[0], cmd, arg); i2c_clients_command(&cx->i2c_adap[1], cmd, arg); + if (cx->hw_flags & CX18_HW_GPIO) + cx18_gpio(cx, cmd, arg); } /* init + register i2c algo-bit adapter */ @@ -358,6 +364,18 @@ int init_cx18_i2c(struct cx18 *cx) int i; CX18_DEBUG_I2C("i2c init\n"); + /* Sanity checks for the I2C hardware arrays. They must be the + * same size and GPIO/CX23418 must be the last entries. + */ + if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) || + ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) || + CX18_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 2)) || + CX18_HW_CX23418 != (1 << (ARRAY_SIZE(hw_addrs) - 1)) || + hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) { + CX18_ERR("Mismatched I2C hardware arrays\n"); + return -ENODEV; + } + for (i = 0; i < 2; i++) { memcpy(&cx->i2c_adap[i], &cx18_i2c_adap_template, sizeof(struct i2c_adapter));