From: Jean Delvare Date: Sun, 25 Sep 2005 14:26:44 +0000 (+0200) Subject: [PATCH] hwmon: Discard explicit static initializations to 0 X-Git-Tag: v2.6.15-rc1~732^2^2^2~64 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0200296310a454b39efc995e676f9ff60e641edb;p=linux-2.6 [PATCH] hwmon: Discard explicit static initializations to 0 Kill explicit static initializations to 0 in 2 hwmon drivers. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index e928cdb041..58aee3a00c 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -121,7 +121,7 @@ static int adm1021_write_value(struct i2c_client *client, u8 reg, static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only = 0; +static int read_only; /* This is the driver that will be inserted */ diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 688ccf924c..54861f13fe 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -44,7 +44,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static unsigned short force_addr = 0; +static unsigned short force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");