From: Muli Ben-Yehuda Date: Sat, 21 Jul 2007 15:10:54 +0000 (+0200) Subject: x86_64: implement CalIOC2 TCE cache flush sequence X-Git-Tag: v2.6.23-rc1~86 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=00be3fa42f164f7e2783a5acf9766fb07fb64e68;p=linux-2.6 x86_64: implement CalIOC2 TCE cache flush sequence Signed-off-by: Muli Ben-Yehuda Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index 68634f192d..765c521dd8 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -81,6 +81,8 @@ int use_calgary __read_mostly = 0; /* CalIOC2 specific */ #define PHB_SAVIOR_L2 0x0DB0 +#define PHB_PAGE_MIG_CTRL 0x0DA8 +#define PHB_PAGE_MIG_DEBUG 0x0DA0 /* PHB_CONFIG_RW */ #define PHB_TCE_ENABLE 0x20000000 @@ -95,6 +97,10 @@ int use_calgary __read_mostly = 0; #define CSR_AGENT_MASK 0xffe0ffff /* CCR (Calgary Configuration Register) */ #define CCR_2SEC_TIMEOUT 0x000000000000000EUL +/* PMCR/PMDR (Page Migration Control/Debug Registers */ +#define PMR_SOFTSTOP 0x80000000 +#define PMR_SOFTSTOPFAULT 0x40000000 +#define PMR_HARDSTOP 0x20000000 #define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */ #define MAX_NUM_CHASSIS 8 /* max number of chassis */ @@ -160,6 +166,7 @@ struct calgary_bus_info { static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); static void calgary_tce_cache_blast(struct iommu_table *tbl); static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); +static void calioc2_tce_cache_blast(struct iommu_table *tbl); static struct cal_chipset_ops calgary_chip_ops = { .handle_quirks = calgary_handle_quirks, @@ -168,7 +175,7 @@ static struct cal_chipset_ops calgary_chip_ops = { static struct cal_chipset_ops calioc2_chip_ops = { .handle_quirks = calioc2_handle_quirks, - .tce_cache_blast = NULL + .tce_cache_blast = calioc2_tce_cache_blast }; static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, }; @@ -637,6 +644,85 @@ static void calgary_tce_cache_blast(struct iommu_table *tbl) (void)readl(target); /* flush */ } +static void calioc2_tce_cache_blast(struct iommu_table *tbl) +{ + void __iomem *bbar = tbl->bbar; + void __iomem *target; + u64 val64; + u32 val; + int i = 0; + int count = 1; + unsigned char bus = tbl->it_busno; + +begin: + printk(KERN_DEBUG "Calgary: CalIOC2 bus 0x%x entering tce cache blast " + "sequence - count %d\n", bus, count); + + /* 1. using the Page Migration Control reg set SoftStop */ + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "1a. read 0x%x [LE] from %p\n", val, target); + val |= PMR_SOFTSTOP; + printk(KERN_DEBUG "1b. writing 0x%x [LE] to %p\n", val, target); + writel(cpu_to_be32(val), target); + + /* 2. poll split queues until all DMA activity is done */ + printk(KERN_DEBUG "2a. starting to poll split queues\n"); + target = calgary_reg(bbar, split_queue_offset(bus)); + do { + val64 = readq(target); + i++; + } while ((val64 & 0xff) != 0xff && i < 100); + if (i == 100) + printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, " + "continuing anyway\n"); + + /* 3. poll Page Migration DEBUG for SoftStopFault */ + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "3. read 0x%x [LE] from %p\n", val, target); + + /* 4. if SoftStopFault - goto (1) */ + if (val & PMR_SOFTSTOPFAULT) { + if (++count < 100) + goto begin; + else { + printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, " + "aborting TCE cache flush sequence!\n"); + return; /* pray for the best */ + } + } + + /* 5. Slam into HardStop by reading PHB_PAGE_MIG_CTRL */ + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + printk(KERN_DEBUG "5a. slamming into HardStop by reading %p\n", target); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "5b. read 0x%x [LE] from %p\n", val, target); + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "5c. read 0x%x [LE] from %p (debug)\n", val, target); + + /* 6. invalidate TCE cache */ + printk(KERN_DEBUG "6. invalidating TCE cache\n"); + target = calgary_reg(bbar, tar_offset(bus)); + writeq(tbl->tar_val, target); + + /* 7. Re-read PMCR */ + printk(KERN_DEBUG "7a. Re-reading PMCR\n"); + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "7b. read 0x%x [LE] from %p\n", val, target); + + /* 8. Remove HardStop */ + printk(KERN_DEBUG "8a. removing HardStop from PMCR\n"); + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + val = 0; + printk(KERN_DEBUG "8b. writing 0x%x [LE] to %p\n", val, target); + writel(cpu_to_be32(val), target); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "8c. read 0x%x [LE] from %p\n", val, target); +} + static void __init calgary_reserve_mem_region(struct pci_dev *dev, u64 start, u64 limit) {