static void kgdb_to_gdb(const char *s);
-#ifdef CONFIG_KGDB_THREAD
-static struct task_struct *trapped_thread;
-static struct task_struct *current_thread;
-typedef unsigned char threadref[8];
-#define BUF_THREAD_ID_SIZE 16
-#endif
-
-
/* Convert ch to hex */
static int hex(const char ch)
{
return pkt;
}
-#ifdef CONFIG_KGDB_THREAD
-
-/* Pack a thread ID */
-static char *pack_threadid(char *pkt, threadref * id)
-{
- char *limit;
- unsigned char *altid;
-
- altid = (unsigned char *) id;
-
- limit = pkt + BUF_THREAD_ID_SIZE;
- while (pkt < limit)
- pkt = pack_hex_byte(pkt, *altid++);
- return pkt;
-}
-
-/* Convert an integer into our threadref */
-static void int_to_threadref(threadref * id, const int value)
-{
- unsigned char *scan = (unsigned char *) id;
- int i = 4;
-
- while (i--)
- *scan++ = 0;
-
- *scan++ = (value >> 24) & 0xff;
- *scan++ = (value >> 16) & 0xff;
- *scan++ = (value >> 8) & 0xff;
- *scan++ = (value & 0xff);
-}
-
-/* Return a task structure ptr for a particular pid */
-static struct task_struct *get_thread(int pid)
-{
- struct task_struct *thread;
-
- /* Use PID_MAX w/gdb for pid 0 */
- if (pid == PID_MAX) pid = 0;
-
- /* First check via PID */
- thread = find_task_by_pid(pid);
-
- if (thread)
- return thread;
-
- /* Start at the start */
- thread = init_tasks[0];
-
- /* Walk along the linked list of tasks */
- do {
- if (thread->pid == pid)
- return thread;
- thread = thread->next_task;
- } while (thread != init_tasks[0]);
-
- return NULL;
-}
-
-#endif /* CONFIG_KGDB_THREAD */
-
/* Scan for the start char '$', read the packet and check the checksum */
static void get_packet(char *buffer, int buflen)
{
regs->vbr = gdb_regs[VBR];
}
-#ifdef CONFIG_KGDB_THREAD
-/* Make a local copy of registers from the specified thread */
-asmlinkage void ret_from_fork(void);
-static void thread_regs_to_gdb_regs(const struct task_struct *thread,
- int *gdb_regs)
-{
- int regno;
- int *tregs;
-
- /* Initialize to zero */
- for (regno = 0; regno < MAXREG; regno++)
- gdb_regs[regno] = 0;
-
- /* Just making sure... */
- if (thread == NULL)
- return;
-
- /* A new fork has pt_regs on the stack from a fork() call */
- if (thread->thread.pc == (unsigned long)ret_from_fork) {
-
- int vbr_val;
- struct pt_regs *kregs;
- kregs = (struct pt_regs*)thread->thread.sp;
-
- gdb_regs[R0] = kregs->regs[R0];
- gdb_regs[R1] = kregs->regs[R1];
- gdb_regs[R2] = kregs->regs[R2];
- gdb_regs[R3] = kregs->regs[R3];
- gdb_regs[R4] = kregs->regs[R4];
- gdb_regs[R5] = kregs->regs[R5];
- gdb_regs[R6] = kregs->regs[R6];
- gdb_regs[R7] = kregs->regs[R7];
- gdb_regs[R8] = kregs->regs[R8];
- gdb_regs[R9] = kregs->regs[R9];
- gdb_regs[R10] = kregs->regs[R10];
- gdb_regs[R11] = kregs->regs[R11];
- gdb_regs[R12] = kregs->regs[R12];
- gdb_regs[R13] = kregs->regs[R13];
- gdb_regs[R14] = kregs->regs[R14];
- gdb_regs[R15] = kregs->regs[R15];
- gdb_regs[PC] = kregs->pc;
- gdb_regs[PR] = kregs->pr;
- gdb_regs[GBR] = kregs->gbr;
- gdb_regs[MACH] = kregs->mach;
- gdb_regs[MACL] = kregs->macl;
- gdb_regs[SR] = kregs->sr;
-
- asm("stc vbr, %0":"=r"(vbr_val));
- gdb_regs[VBR] = vbr_val;
- return;
- }
-
- /* Otherwise, we have only some registers from switch_to() */
- tregs = (int *)thread->thread.sp;
- gdb_regs[R15] = (int)tregs;
- gdb_regs[R14] = *tregs++;
- gdb_regs[R13] = *tregs++;
- gdb_regs[R12] = *tregs++;
- gdb_regs[R11] = *tregs++;
- gdb_regs[R10] = *tregs++;
- gdb_regs[R9] = *tregs++;
- gdb_regs[R8] = *tregs++;
- gdb_regs[PR] = *tregs++;
- gdb_regs[GBR] = *tregs++;
- gdb_regs[PC] = thread->thread.pc;
-}
-#endif /* CONFIG_KGDB_THREAD */
-
/* Calculate the new address for after a step */
static short *get_step_address(void)
{
/* Send a signal message */
static void send_signal_msg(const int signum)
{
-#ifndef CONFIG_KGDB_THREAD
out_buffer[0] = 'S';
out_buffer[1] = highhex(signum);
out_buffer[2] = lowhex(signum);
out_buffer[3] = 0;
put_packet(out_buffer);
-#else /* CONFIG_KGDB_THREAD */
- int threadid;
- threadref thref;
- char *out = out_buffer;
- const char *tstring = "thread";
-
- *out++ = 'T';
- *out++ = highhex(signum);
- *out++ = lowhex(signum);
-
- while (*tstring) {
- *out++ = *tstring++;
- }
- *out++ = ':';
-
- threadid = trapped_thread->pid;
- if (threadid == 0) threadid = PID_MAX;
- int_to_threadref(&thref, threadid);
- pack_threadid(out, &thref);
- out += BUF_THREAD_ID_SIZE;
- *out++ = ';';
-
- *out = 0;
- put_packet(out_buffer);
-#endif /* CONFIG_KGDB_THREAD */
}
/* Reply that all was well */
/* Send register contents */
static void send_regs_msg(void)
{
-#ifdef CONFIG_KGDB_THREAD
- if (!current_thread)
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- else
- thread_regs_to_gdb_regs(current_thread, registers);
-#else
kgdb_regs_to_gdb_regs(&trap_registers, registers);
-#endif
-
mem_to_hex((char *) registers, out_buffer, NUMREGBYTES);
put_packet(out_buffer);
}
/* Set register contents - currently can't set other thread's registers */
static void set_regs_msg(void)
{
-#ifdef CONFIG_KGDB_THREAD
- if (!current_thread) {
-#endif
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
- gdb_regs_to_kgdb_regs(registers, &trap_registers);
- send_ok_msg();
-#ifdef CONFIG_KGDB_THREAD
- } else
- send_err_msg();
-#endif
-}
-
-
-#ifdef CONFIG_KGDB_THREAD
-
-/* Set the status for a thread */
-void set_thread_msg(void)
-{
- int threadid;
- struct task_struct *thread = NULL;
- char *ptr;
-
- switch (in_buffer[1]) {
- /* To select which thread for gG etc messages, i.e. supported */
- case 'g':
- ptr = &in_buffer[2];
- hex_to_int(&ptr, &threadid);
- thread = get_thread(threadid);
-
- /* If we haven't found it */
- if (!thread) {
- send_err_msg();
- break;
- }
-
- /* Set current_thread (or not) */
- if (thread == trapped_thread)
- current_thread = NULL;
- else
- current_thread = thread;
- send_ok_msg();
- break;
-
- /* To select which thread for cCsS messages, i.e. unsupported */
- case 'c':
- send_ok_msg();
- break;
-
- default:
- send_empty_msg();
- break;
- }
-}
-
-/* Is a thread alive? */
-static void thread_status_msg(void)
-{
- char *ptr;
- int threadid;
- struct task_struct *thread = NULL;
-
- ptr = &in_buffer[1];
- hex_to_int(&ptr, &threadid);
- thread = get_thread(threadid);
- if (thread)
- send_ok_msg();
- else
- send_err_msg();
-}
-/* Send the current thread ID */
-static void thread_id_msg(void)
-{
- int threadid;
- threadref thref;
-
- out_buffer[0] = 'Q';
- out_buffer[1] = 'C';
-
- if (current_thread)
- threadid = current_thread->pid;
- else if (trapped_thread)
- threadid = trapped_thread->pid;
- else /* Impossible, but just in case! */
- {
- send_err_msg();
- return;
- }
-
- /* Translate pid 0 to PID_MAX for gdb */
- if (threadid == 0) threadid = PID_MAX;
-
- int_to_threadref(&thref, threadid);
- pack_threadid(out_buffer + 2, &thref);
- out_buffer[2 + BUF_THREAD_ID_SIZE] = '\0';
- put_packet(out_buffer);
-}
-
-/* Send thread info */
-static void thread_info_msg(void)
-{
- struct task_struct *thread = NULL;
- int threadid;
- char *pos;
- threadref thref;
-
- /* Start with 'm' */
- out_buffer[0] = 'm';
- pos = &out_buffer[1];
-
- /* For all possible thread IDs - this will overrun if > 44 threads! */
- /* Start at 1 and include PID_MAX (since GDB won't use pid 0...) */
- for (threadid = 1; threadid <= PID_MAX; threadid++) {
-
- read_lock(&tasklist_lock);
- thread = get_thread(threadid);
- read_unlock(&tasklist_lock);
-
- /* If it's a valid thread */
- if (thread) {
- int_to_threadref(&thref, threadid);
- pack_threadid(pos, &thref);
- pos += BUF_THREAD_ID_SIZE;
- *pos++ = ',';
- }
- }
- *--pos = 0; /* Lose final comma */
- put_packet(out_buffer);
-
-}
-
-/* Return printable info for gdb's 'info threads' command */
-static void thread_extra_info_msg(void)
-{
- int threadid;
- struct task_struct *thread = NULL;
- char buffer[20], *ptr;
- int i;
-
- /* Extract thread ID */
- ptr = &in_buffer[17];
- hex_to_int(&ptr, &threadid);
- thread = get_thread(threadid);
-
- /* If we don't recognise it, say so */
- if (thread == NULL)
- strcpy(buffer, "(unknown)");
- else
- strcpy(buffer, thread->comm);
-
- /* Construct packet */
- for (i = 0, ptr = out_buffer; buffer[i]; i++)
- ptr = pack_hex_byte(ptr, buffer[i]);
-
- if (thread->thread.pc == (unsigned long)ret_from_fork) {
- strcpy(buffer, "<new fork>");
- for (i = 0; buffer[i]; i++)
- ptr = pack_hex_byte(ptr, buffer[i]);
- }
-
- *ptr = '\0';
- put_packet(out_buffer);
-}
-
-/* Handle all qFooBarBaz messages - have to use an if statement as
- opposed to a switch because q messages can have > 1 char id. */
-static void query_msg(void)
-{
- const char *q_start = &in_buffer[1];
-
- /* qC = return current thread ID */
- if (strncmp(q_start, "C", 1) == 0)
- thread_id_msg();
-
- /* qfThreadInfo = query all threads (first) */
- else if (strncmp(q_start, "fThreadInfo", 11) == 0)
- thread_info_msg();
-
- /* qsThreadInfo = query all threads (subsequent). We know we have sent
- them all after the qfThreadInfo message, so there are no to send */
- else if (strncmp(q_start, "sThreadInfo", 11) == 0)
- put_packet("l"); /* el = last */
-
- /* qThreadExtraInfo = supply printable information per thread */
- else if (strncmp(q_start, "ThreadExtraInfo", 15) == 0)
- thread_extra_info_msg();
-
- /* Unsupported - empty message as per spec */
- else
- send_empty_msg();
+ kgdb_regs_to_gdb_regs(&trap_registers, registers);
+ hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
+ gdb_regs_to_kgdb_regs(registers, &trap_registers);
+ send_ok_msg();
}
-#endif /* CONFIG_KGDB_THREAD */
#ifdef CONFIG_SH_KGDB_CONSOLE
/*
if (!kgdb_enabled)
return;
-#ifdef CONFIG_KGDB_THREAD
- /* Until GDB specifies a thread */
- current_thread = NULL;
- trapped_thread = current;
-#endif
-
/* Enter GDB mode (e.g. after detach) */
if (!kgdb_in_gdb_mode) {
/* Do serial setup, notify user, issue preemptive ack */
step_msg();
return;
-#ifdef CONFIG_KGDB_THREAD
-
- case 'H': /* Task related */
- set_thread_msg();
- break;
-
- case 'T': /* Query thread status */
- thread_status_msg();
- break;
-
- case 'q': /* Handle query - currently thread-related */
- query_msg();
- break;
-#endif
-
case 'k': /* 'Kill the program' with a kernel ? */
break;
projects / linux-2.6 / commitdiff