--- /dev/null
+#
+# Makefile for the video capture/playback device drivers.
+#
+
+bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \
+ bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
+ bttv-input.o
+
+obj-$(CONFIG_VIDEO_BT848) += bttv.o
+
+EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
#include <asm/io.h>
#include <asm/byteorder.h>
-#include "rds.h"
+#include <media/rds.h>
unsigned int bttv_num; /* number of Bt848s in use */
#include <linux/i2c.h>
#include <media/ir-common.h>
#include <media/ir-kbd-i2c.h>
+#include <media/i2c-addr.h>
/* ---------------------------------------------------------- */
/* exported by bttv-cards.c */
#define BTTV_BOARD_HAUPPAUGE_IMPACTVCB 0x8f
#define BTTV_BOARD_MACHTV_MAGICTV 0x90
-/* i2c address list */
-#define I2C_TSA5522 0xc2
-#define I2C_TDA7432 0x8a
-#define I2C_BT832_ALT1 0x88
-#define I2C_BT832_ALT2 0x8a // alternate setting
-#define I2C_TDA8425 0x82
-#define I2C_TDA9840 0x84
-#define I2C_TDA9850 0xb6 /* also used by 9855,9873 */
-#define I2C_TDA9874 0xb0 /* also used by 9875 */
-#define I2C_TDA9875 0xb0
-#define I2C_HAUPEE 0xa0
-#define I2C_STBEE 0xae
-#define I2C_VHX 0xc0
-#define I2C_MSP3400 0x80
-#define I2C_MSP3400_ALT 0x88
-#define I2C_TEA6300 0x80 /* also used by 6320 */
-#define I2C_DPL3518 0x84
-#define I2C_TDA9887 0x86
-
/* more card-specific defines */
#define PT2254_L_CHANNEL 0x10
#define PT2254_R_CHANNEL 0x08
#include <asm/uaccess.h>
-#include "rds.h"
+#include <media/rds.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = {
if (saa7134_no_overlay <= 0) {
saa7134_video_template.type |= VID_TYPE_OVERLAY;
} else {
- printk("bttv: Overlay support disabled.\n");
+ printk("%s: Overlay support disabled.\n",dev->name);
}
dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include "bttv.h"
#include <media/audiochip.h>
#include <media/v4l2-common.h>
+#include <media/i2c-addr.h>
#ifndef VIDEO_AUDIO_BALANCE
# define VIDEO_AUDIO_BALANCE 32
#include <linux/i2c-algo-bit.h>
#include <linux/init.h>
-#include "bttv.h"
#include <media/audiochip.h>
+#include <media/i2c-addr.h>
+
static int debug; /* insmod parameter */
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_LICENSE("GPL");
-
/* Addresses to scan */
static unsigned short normal_i2c[] = {
I2C_TDA9875 >> 1,
--- /dev/null
+/*
+ * V4L I2C address list
+ *
+ *
+ * Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
+ * Based on a previous mapping by
+ * Ralph Metzler (rjkm@thp.uni-koeln.de)
+ * Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ *
+ */
+
+/* bttv address list */
+#define I2C_TSA5522 0xc2
+#define I2C_TDA7432 0x8a
+#define I2C_BT832_ALT1 0x88
+#define I2C_BT832_ALT2 0x8a // alternate setting
+#define I2C_TDA8425 0x82
+#define I2C_TDA9840 0x84
+#define I2C_TDA9850 0xb6 /* also used by 9855,9873 */
+#define I2C_TDA9874 0xb0 /* also used by 9875 */
+#define I2C_TDA9875 0xb0
+#define I2C_HAUPEE 0xa0
+#define I2C_STBEE 0xae
+#define I2C_VHX 0xc0
+#define I2C_MSP3400 0x80
+#define I2C_MSP3400_ALT 0x88
+#define I2C_TEA6300 0x80 /* also used by 6320 */
+#define I2C_DPL3518 0x84
+#define I2C_TDA9887 0x86
+
#define RDS_CMD_POLL _IOR('R',4,int)
#endif
-
-
-
-