#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/vmalloc.h>
+#include <linux/mutex.h>
#include <asm/mca.h>
#include <asm/sal.h>
#include <asm/sn/sn_sal.h>
/* Printing oemdata from mca uses data that is not passed through SAL, it is
* global. Only one user at a time.
*/
-static DECLARE_MUTEX(sn_oemdata_mutex);
+static DEFINE_MUTEX(sn_oemdata_mutex);
static u8 **sn_oemdata;
static u64 *sn_oemdata_size, sn_oemdata_bufsize;
sn_platform_plat_specific_err_print(const u8 * sect_header, u8 ** oemdata,
u64 * oemdata_size)
{
- down(&sn_oemdata_mutex);
+ mutex_lock(&sn_oemdata_mutex);
sn_oemdata = oemdata;
sn_oemdata_size = oemdata_size;
sn_oemdata_bufsize = 0;
*sn_oemdata_size = 0;
ia64_sn_plat_specific_err_print(print_hook, (char *)sect_header);
}
- up(&sn_oemdata_mutex);
+ mutex_unlock(&sn_oemdata_mutex);
return 0;
}
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/xp.h>
registration = &xpc_registrations[ch_number];
- if (down_interruptible(®istration->sema) != 0) {
+ if (mutex_lock_interruptible(®istration->mutex) != 0) {
return xpcInterrupted;
}
/* if XPC_CHANNEL_REGISTERED(ch_number) */
if (registration->func != NULL) {
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
return xpcAlreadyRegistered;
}
registration->key = key;
registration->func = func;
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
xpc_interface.connect(ch_number);
* figured XPC's users will just turn around and call xpc_disconnect()
* again anyways, so we might as well wait, if need be.
*/
- down(®istration->sema);
+ mutex_lock(®istration->mutex);
/* if !XPC_CHANNEL_REGISTERED(ch_number) */
if (registration->func == NULL) {
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
return;
}
xpc_interface.disconnect(ch_number);
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
return;
}
xp_nofault_PIOR_target = SH1_IPI_ACCESS;
}
- /* initialize the connection registration semaphores */
+ /* initialize the connection registration mutex */
for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++) {
- sema_init(&xpc_registrations[ch_number].sema, 1); /* mutex */
+ mutex_init(&xpc_registrations[ch_number].mutex);
}
return 0;
#include <linux/cache.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
#include <asm/sn/bte.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/xpc.h>
atomic_set(&ch->n_to_notify, 0);
spin_lock_init(&ch->lock);
- sema_init(&ch->msg_to_pull_sema, 1); /* mutex */
- sema_init(&ch->wdisconnect_sema, 0); /* event wait */
+ mutex_init(&ch->msg_to_pull_mutex);
+ init_completion(&ch->wdisconnect_wait);
atomic_set(&ch->n_on_msg_allocate_wq, 0);
init_waitqueue_head(&ch->msg_allocate_wq);
xpc_allocate_msgqueues(struct xpc_channel *ch)
{
unsigned long irq_flags;
- int i;
enum xpc_retval ret;
return ret;
}
- for (i = 0; i < ch->local_nentries; i++) {
- /* use a semaphore as an event wait queue */
- sema_init(&ch->notify_queue[i].sema, 0);
- }
-
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_SETUP;
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
if (ch->flags & XPC_C_WDISCONNECT) {
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- up(&ch->wdisconnect_sema);
- spin_lock_irqsave(&ch->lock, *irq_flags);
-
+ /* we won't lose the CPU since we're holding ch->lock */
+ complete(&ch->wdisconnect_wait);
} else if (ch->delayed_IPI_flags) {
if (part->act_state != XPC_P_DEACTIVATING) {
/* time to take action on any delayed IPI flags */
struct xpc_registration *registration = &xpc_registrations[ch->number];
- if (down_trylock(®istration->sema) != 0) {
+ if (mutex_trylock(®istration->mutex) == 0) {
return xpcRetry;
}
if (!XPC_CHANNEL_REGISTERED(ch->number)) {
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
return xpcUnregistered;
}
if (ch->flags & XPC_C_DISCONNECTING) {
spin_unlock_irqrestore(&ch->lock, irq_flags);
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
return ch->reason;
}
* channel lock be locked and will unlock and relock
* the channel lock as needed.
*/
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
atomic_inc(&xpc_partitions[ch->partid].nchannels_active);
}
- up(®istration->sema);
+ mutex_unlock(®istration->mutex);
/* initiate the connection */
enum xpc_retval ret;
- if (down_interruptible(&ch->msg_to_pull_sema) != 0) {
+ if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
/* we were interrupted by a signal */
return NULL;
}
XPC_DEACTIVATE_PARTITION(part, ret);
- up(&ch->msg_to_pull_sema);
+ mutex_unlock(&ch->msg_to_pull_mutex);
return NULL;
}
ch->next_msg_to_pull += nmsgs;
}
- up(&ch->msg_to_pull_sema);
+ mutex_unlock(&ch->msg_to_pull_mutex);
/* return the message we were looking for */
msg_offset = (get % ch->remote_nentries) * ch->msg_size;
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/reboot.h>
+#include <linux/completion.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn_sal.h>
#include <asm/kdebug.h>
static unsigned long xpc_hb_check_timeout;
/* notification that the xpc_hb_checker thread has exited */
-static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited);
+static DECLARE_COMPLETION(xpc_hb_checker_exited);
/* notification that the xpc_discovery thread has exited */
-static DECLARE_MUTEX_LOCKED(xpc_discovery_exited);
+static DECLARE_COMPLETION(xpc_discovery_exited);
static struct timer_list xpc_hb_timer;
/* mark this thread as having exited */
- up(&xpc_hb_checker_exited);
+ complete(&xpc_hb_checker_exited);
return 0;
}
dev_dbg(xpc_part, "discovery thread is exiting\n");
/* mark this thread as having exited */
- up(&xpc_discovery_exited);
+ complete(&xpc_discovery_exited);
return 0;
}
continue;
}
- (void) down(&ch->wdisconnect_sema);
+ wait_for_completion(&ch->wdisconnect_wait);
spin_lock_irqsave(&ch->lock, irq_flags);
DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
free_irq(SGI_XPC_ACTIVATE, NULL);
/* wait for the discovery thread to exit */
- down(&xpc_discovery_exited);
+ wait_for_completion(&xpc_discovery_exited);
/* wait for the heartbeat checker thread to exit */
- down(&xpc_hb_checker_exited);
+ wait_for_completion(&xpc_hb_checker_exited);
/* sleep for a 1/3 of a second or so */
dev_err(xpc_part, "failed while forking discovery thread\n");
/* mark this new thread as a non-starter */
- up(&xpc_discovery_exited);
+ complete(&xpc_discovery_exited);
xpc_do_exit(xpcUnloading);
return -EBUSY;
#include <linux/cache.h>
#include <linux/hardirq.h>
+#include <linux/mutex.h>
#include <asm/sn/types.h>
#include <asm/sn/bte.h>
* the channel.
*/
struct xpc_registration {
- struct semaphore sema;
+ struct mutex mutex;
xpc_channel_func func; /* function to call */
void *key; /* pointer to user's key */
u16 nentries; /* #of msg entries in local msg queue */
#include <linux/interrupt.h>
#include <linux/sysctl.h>
#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/sn/bte.h>
* and consumed by the intended recipient.
*/
struct xpc_notify {
- struct semaphore sema; /* notify semaphore */
- volatile u8 type; /* type of notification */
+ volatile u8 type; /* type of notification */
/* the following two fields are only used if type == XPC_N_CALL */
xpc_notify_func func; /* user's notify function */
xpc_channel_func func; /* user's channel function */
void *key; /* pointer to user's key */
- struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
- struct semaphore wdisconnect_sema; /* wait for channel disconnect */
+ struct mutex msg_to_pull_mutex; /* next msg to pull serialization */
+ struct completion wdisconnect_wait; /* wait for channel disconnect */
struct xpc_openclose_args *local_openclose_args; /* args passed on */
/* opening or closing of channel */
projects / linux-2.6 / commitdiff