*
* Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
* Copyright (C) 2001-2002 Benjamin Herrenschmidt
+ * Copyright (C) 2006-2007 Johannes Berg
*
* THIS DRIVER IS BECOMING A TOTAL MESS !
* - Cleanup atomically disabling reply to PMU events after
* a sleep or a freq. switch
- * - Move sleep code out of here to pmac_pm, merge into new
- * common PM infrastructure
- * - Save/Restore PCI space properly
*
*/
#include <stdarg.h>
#include "via-pmu-event.h"
/* Some compile options */
-#define DEBUG_SLEEP
+#undef DEBUG_SLEEP
/* Misc minor number allocated for /dev/pmu */
#define PMU_MINOR 154
static u8 pmu_intr_mask;
static int pmu_version;
static int drop_interrupts;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
static int option_lid_wakeup = 1;
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
-#if (defined(CONFIG_PM_SLEEP)&&defined(CONFIG_PPC32))||defined(CONFIG_PMAC_BACKLIGHT_LEGACY)
-static int sleep_in_progress;
-#endif
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
static unsigned long async_req_locks;
static unsigned int pmu_irq_stats[11];
#ifdef DEBUG_SLEEP
int pmu_polled_request(struct adb_request *req);
-int pmu_wink(struct adb_request *req);
+void pmu_blink(int n);
#endif
/*
{
char *p = page;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
if (pmu_kind == PMU_KEYLARGO_BASED &&
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
*(val++) = 0;
while(*val == ' ')
val++;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
if (pmu_kind == PMU_KEYLARGO_BASED &&
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
if (!strcmp(label, "lid_wakeup"))
return via != 0;
}
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
-#ifdef DEBUG_SLEEP
-/* N.B. This doesn't work on the 3400 */
-void
-pmu_blink(int n)
-{
- struct adb_request req;
-
- memset(&req, 0, sizeof(req));
-
- for (; n > 0; --n) {
- req.nbytes = 4;
- req.done = NULL;
- req.data[0] = 0xee;
- req.data[1] = 4;
- req.data[2] = 0;
- req.data[3] = 1;
- req.reply[0] = ADB_RET_OK;
- req.reply_len = 1;
- req.reply_expected = 0;
- pmu_polled_request(&req);
- mdelay(50);
- req.nbytes = 4;
- req.done = NULL;
- req.data[0] = 0xee;
- req.data[1] = 4;
- req.data[2] = 0;
- req.data[3] = 0;
- req.reply[0] = ADB_RET_OK;
- req.reply_len = 1;
- req.reply_expected = 0;
- pmu_polled_request(&req);
- mdelay(50);
- }
- mdelay(50);
-}
-#endif
-
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
/*
* Put the powerbook to sleep.
*/
extern void pmu_backlight_set_sleep(int sleep);
-static int
-pmac_suspend_devices(void)
-{
- int ret;
-
- pm_prepare_console();
-
- /* Sync the disks. */
- /* XXX It would be nice to have some way to ensure that
- * nobody is dirtying any new buffers while we wait. That
- * could be achieved using the refrigerator for processes
- * that swsusp uses
- */
- sys_sync();
-
- /* Send suspend call to devices, hold the device core's dpm_sem */
- ret = device_suspend(PMSG_SUSPEND);
- if (ret) {
- printk(KERN_ERR "Driver sleep failed\n");
- return -EBUSY;
- }
-
-#ifdef CONFIG_PMAC_BACKLIGHT
- /* Tell backlight code not to muck around with the chip anymore */
- pmu_backlight_set_sleep(1);
-#endif
-
- /* Call platform functions marked "on sleep" */
- pmac_pfunc_i2c_suspend();
- pmac_pfunc_base_suspend();
-
- /* Stop preemption */
- preempt_disable();
-
- /* Make sure the decrementer won't interrupt us */
- asm volatile("mtdec %0" : : "r" (0x7fffffff));
- /* Make sure any pending DEC interrupt occurring while we did
- * the above didn't re-enable the DEC */
- mb();
- asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
- /* We can now disable MSR_EE. This code of course works properly only
- * on UP machines... For SMP, if we ever implement sleep, we'll have to
- * stop the "other" CPUs way before we do all that stuff.
- */
- local_irq_disable();
-
- /* Broadcast power down irq
- * This isn't that useful in most cases (only directly wired devices can
- * use this but still... This will take care of sysdev's as well, so
- * we exit from here with local irqs disabled and PIC off.
- */
- ret = device_power_down(PMSG_SUSPEND);
- if (ret) {
- wakeup_decrementer();
- local_irq_enable();
- preempt_enable();
- device_resume();
- printk(KERN_ERR "Driver powerdown failed\n");
- return -EBUSY;
- }
-
- /* Wait for completion of async requests */
- while (!batt_req.complete)
- pmu_poll();
-
- /* Giveup the lazy FPU & vec so we don't have to back them
- * up from the low level code
- */
- enable_kernel_fp();
-
-#ifdef CONFIG_ALTIVEC
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- enable_kernel_altivec();
-#endif /* CONFIG_ALTIVEC */
-
- return 0;
-}
-
-static int
-pmac_wakeup_devices(void)
-{
- mdelay(100);
-
-#ifdef CONFIG_PMAC_BACKLIGHT
- /* Tell backlight code it can use the chip again */
- pmu_backlight_set_sleep(0);
-#endif
-
- /* Power back up system devices (including the PIC) */
- device_power_up();
-
- /* Force a poll of ADB interrupts */
- adb_int_pending = 1;
- via_pmu_interrupt(0, NULL);
-
- /* Restart jiffies & scheduling */
- wakeup_decrementer();
-
- /* Re-enable local CPU interrupts */
- local_irq_enable();
- mdelay(10);
- preempt_enable();
-
- /* Call platform functions marked "on wake" */
- pmac_pfunc_base_resume();
- pmac_pfunc_i2c_resume();
-
- /* Resume devices */
- device_resume();
-
- pm_restore_console();
-
- return 0;
-}
-
#define GRACKLE_PM (1<<7)
#define GRACKLE_DOZE (1<<5)
#define GRACKLE_NAP (1<<4)
unsigned long save_l2cr;
unsigned short pmcr1;
struct adb_request req;
- int ret;
struct pci_dev *grackle;
grackle = pci_get_bus_and_slot(0, 0);
if (!grackle)
return -ENODEV;
- ret = pmac_suspend_devices();
- if (ret) {
- printk(KERN_ERR "Sleep rejected by devices\n");
- return ret;
- }
-
/* Turn off various things. Darwin does some retry tests here... */
pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
pmu_wait_complete(&req);
PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
pmu_wait_complete(&req);
- pmac_wakeup_devices();
-
return 0;
}
unsigned long save_l2cr;
unsigned long save_l3cr;
struct adb_request req;
- int ret;
if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
printk(KERN_ERR "Sleep mode not supported on this machine\n");
if (num_online_cpus() > 1 || cpu_is_offline(0))
return -EAGAIN;
- ret = pmac_suspend_devices();
- if (ret) {
- printk(KERN_ERR "Sleep rejected by devices\n");
- return ret;
- }
-
/* Stop environment and ADB interrupts */
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
pmu_wait_complete(&req);
/* Restore LPJ, cpufreq will adjust the cpu frequency */
loops_per_jiffy /= 2;
- pmac_wakeup_devices();
-
return 0;
}
static int powerbook_sleep_3400(void)
{
- int ret, i, x;
+ int i, x;
unsigned int hid0;
unsigned long msr;
struct adb_request sleep_req;
return -ENOMEM;
mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
- ret = pmac_suspend_devices();
- if (ret) {
- printk(KERN_ERR "Sleep rejected by devices\n");
- return ret;
- }
-
/* Set the memory controller to keep the memory refreshed
while we're asleep */
for (i = 0x403f; i >= 0x4000; --i) {
out_be32(mem_ctrl_sleep, 0x3f);
pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
- pmac_wakeup_devices();
-
return 0;
}
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
/*
* Support for /dev/pmu device
return 0;
}
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
+/*
+ * overrides the weak arch_suspend_disable_irqs in kernel/power/main.c
+ *
+ * XXX: Once Scott Wood's patch is merged, this needs to use the ppc_md
+ * hooks that patch adds!
+ */
+void arch_suspend_disable_irqs(void)
+{
+#ifdef CONFIG_PMAC_BACKLIGHT
+ /* Tell backlight code not to muck around with the chip anymore */
+ pmu_backlight_set_sleep(1);
+#endif
+
+ /* Call platform functions marked "on sleep" */
+ pmac_pfunc_i2c_suspend();
+ pmac_pfunc_base_suspend();
+
+ /* Stop preemption */
+ preempt_disable();
+
+ /* Make sure the decrementer won't interrupt us */
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ /* Make sure any pending DEC interrupt occurring while we did
+ * the above didn't re-enable the DEC */
+ mb();
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+ local_irq_disable();
+}
+
+static int powerbook_sleep(suspend_state_t state)
+{
+ int error = 0;
+
+ /* Wait for completion of async requests */
+ while (!batt_req.complete)
+ pmu_poll();
+
+ /* Giveup the lazy FPU & vec so we don't have to back them
+ * up from the low level code
+ */
+ enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+ switch (pmu_kind) {
+ case PMU_OHARE_BASED:
+ error = powerbook_sleep_3400();
+ break;
+ case PMU_HEATHROW_BASED:
+ case PMU_PADDINGTON_BASED:
+ error = powerbook_sleep_grackle();
+ break;
+ case PMU_KEYLARGO_BASED:
+ error = powerbook_sleep_Core99();
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ if (error)
+ return error;
+
+ mdelay(100);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ /* Tell backlight code it can use the chip again */
+ pmu_backlight_set_sleep(0);
+#endif
+
+ return 0;
+}
+
+/*
+ * overrides the weak arch_suspend_enable_irqs in kernel/power/main.c
+ *
+ * XXX: Once Scott Wood's patch is merged, this needs to use the ppc_md
+ * hooks that patch adds!
+ */
+void arch_suspend_enable_irqs(void)
+{
+ /* Force a poll of ADB interrupts */
+ adb_int_pending = 1;
+ via_pmu_interrupt(0, NULL);
+
+ /* Restart jiffies & scheduling */
+ wakeup_decrementer();
+
+ /* Re-enable local CPU interrupts */
+ local_irq_enable();
+ mdelay(10);
+ preempt_enable();
+
+ /* Call platform functions marked "on wake" */
+ pmac_pfunc_base_resume();
+ pmac_pfunc_i2c_resume();
+}
+
+static int pmu_sleep_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM
+ && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
+}
+
+static struct platform_suspend_ops pmu_pm_ops = {
+ .enter = powerbook_sleep,
+ .valid = pmu_sleep_valid,
+};
+
+static int register_pmu_pm_ops(void)
+{
+ suspend_set_ops(&pmu_pm_ops);
+
+ return 0;
+}
+
+device_initcall(register_pmu_pm_ops);
+#endif
+
static int
pmu_ioctl(struct inode * inode, struct file *filp,
u_int cmd, u_long arg)
int error = -EINVAL;
switch (cmd) {
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
case PMU_IOC_SLEEP:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- if (sleep_in_progress)
- return -EBUSY;
- sleep_in_progress = 1;
- switch (pmu_kind) {
- case PMU_OHARE_BASED:
- error = powerbook_sleep_3400();
- break;
- case PMU_HEATHROW_BASED:
- case PMU_PADDINGTON_BASED:
- error = powerbook_sleep_grackle();
- break;
- case PMU_KEYLARGO_BASED:
- error = powerbook_sleep_Core99();
- break;
- default:
- error = -ENOSYS;
- }
- sleep_in_progress = 0;
- break;
+ return pm_suspend(PM_SUSPEND_MEM);
case PMU_IOC_CAN_SLEEP:
- if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0)
+ if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)
return put_user(0, argp);
else
return put_user(1, argp);
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
#ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
/* Compatibility ioctl's for backlight */
{
int brightness;
- if (sleep_in_progress)
- return -EBUSY;
-
brightness = pmac_backlight_get_legacy_brightness();
if (brightness < 0)
return brightness;
{
int brightness;
- if (sleep_in_progress)
- return -EBUSY;
-
error = get_user(brightness, argp);
if (error)
return error;
local_irq_restore(flags);
return 0;
}
-#endif /* DEBUG_SLEEP */
+/* N.B. This doesn't work on the 3400 */
+void pmu_blink(int n)
+{
+ struct adb_request req;
-/* FIXME: This is a temporary set of callbacks to enable us
- * to do suspend-to-disk.
- */
+ memset(&req, 0, sizeof(req));
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+ for (; n > 0; --n) {
+ req.nbytes = 4;
+ req.done = NULL;
+ req.data[0] = 0xee;
+ req.data[1] = 4;
+ req.data[2] = 0;
+ req.data[3] = 1;
+ req.reply[0] = ADB_RET_OK;
+ req.reply_len = 1;
+ req.reply_expected = 0;
+ pmu_polled_request(&req);
+ mdelay(50);
+ req.nbytes = 4;
+ req.done = NULL;
+ req.data[0] = 0xee;
+ req.data[1] = 4;
+ req.data[2] = 0;
+ req.data[3] = 0;
+ req.reply[0] = ADB_RET_OK;
+ req.reply_len = 1;
+ req.reply_expected = 0;
+ pmu_polled_request(&req);
+ mdelay(50);
+ }
+ mdelay(50);
+}
+#endif /* DEBUG_SLEEP */
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
int pmu_sys_suspended;
static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
return 0;
}
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
static struct sysdev_class pmu_sysclass = {
set_kset_name("pmu"),
};
static struct sysdev_driver driver_pmu = {
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
.suspend = &pmu_sys_suspend,
.resume = &pmu_sys_resume,
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
};
static int __init init_pmu_sysfs(void)
EXPORT_SYMBOL(pmu_suspend);
EXPORT_SYMBOL(pmu_resume);
EXPORT_SYMBOL(pmu_unlock);
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
EXPORT_SYMBOL(pmu_batteries);
EXPORT_SYMBOL(pmu_power_flags);
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
projects / linux-2.6 / commitdiff