[POWERPC] pasemi: Minor iommu cleanup

Clean up the pwrficient iommu code a bit. It was using u32 *-based offsets
for registers, which can be a bit confusing when comparing to the manual.

Generated binaries from the code is unchanged from before.

Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 5803f11c77fc07cc961f2610a9f0ec1b9f7aeef7..86967bdd8774db20ae04d13fb7f4b65c80482192 100644 (file)
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005-2007, PA Semi, Inc
+ * Copyright (C) 2005-2008, PA Semi, Inc
  *
  * Maintained by: Olof Johansson <olof@lixom.net>
  *
@@ -27,7 +27,6 @@
 #include <asm/abs_addr.h>
 #include <asm/firmware.h>
 
-
 #define IOBMAP_PAGE_SHIFT      12
 #define IOBMAP_PAGE_SIZE       (1 << IOBMAP_PAGE_SHIFT)
 #define IOBMAP_PAGE_MASK       (IOBMAP_PAGE_SIZE - 1)
@@ -35,13 +34,13 @@
 #define IOB_BASE               0xe0000000
 #define IOB_SIZE               0x3000
 /* Configuration registers */
-#define IOBCAP_REG             0x10
-#define IOBCOM_REG             0x40
+#define IOBCAP_REG             0x40
+#define IOBCOM_REG             0x100
 /* Enable IOB address translation */
 #define IOBCOM_ATEN            0x00000100
 
 /* Address decode configuration register */
-#define IOB_AD_REG             0x53
+#define IOB_AD_REG             0x14c
 /* IOBCOM_AD_REG fields */
 #define IOB_AD_VGPRT           0x00000e00
 #define IOB_AD_VGAEN           0x00000100
@@ -56,13 +55,13 @@
 #define IOB_AD_TRNG_2G         0x00000001
 #define IOB_AD_TRNG_128G       0x00000003
 
-#define IOB_TABLEBASE_REG      0x55
+#define IOB_TABLEBASE_REG      0x154
 
 /* Base of the 64 4-byte L1 registers */
-#define IOB_XLT_L1_REGBASE     0xac0
+#define IOB_XLT_L1_REGBASE     0x2b00
 
 /* Register to invalidate TLB entries */
-#define IOB_AT_INVAL_TLB_REG   0xb40
+#define IOB_AT_INVAL_TLB_REG   0x2d00
 
 /* The top two bits of the level 1 entry contains valid and type flags */
 #define IOBMAP_L1E_V           0x40000000
@@ -76,7 +75,7 @@
 #define IOBMAP_L2E_V           0x80000000
 #define IOBMAP_L2E_V_CACHED    0xc0000000
 
-static u32 __iomem *iob;
+static void __iomem *iob;
 static u32 iob_l1_emptyval;
 static u32 iob_l2_emptyval;
 static u32 *iob_l2_base;
@@ -219,7 +218,7 @@ int __init iob_init(struct device_node *dn)
        for (i = 0; i < 64; i++) {
                /* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
                regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
-               out_le32(iob+IOB_XLT_L1_REGBASE+i, regword);
+               out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
        }
 
        /* set 2GB translation window, based at 0 */