[POWERPC] Re-organize Kconfig code for 4xx in arch/powerpc

Now that we always take a device tree in arch/powerpc, there's no good
reason not to allow a single kernel to support multiple embedded 4xx
boards - the correct platform code can be selected based on the device
tree information.

Therefore, this patch re-arranges the 4xx Kconfig code to allow this.
In addition we:
	- use "select" instead of depends to configure the correct
	  config options for specific 4xx CPUs and workarounds, which
	  makes the information about specific boards and CPUs less
	  scattered.
	- Some old, unused (in arch/powerpc) config options are
	  removed: WANT_EARLY_SERIAL, IBM_OCP, etc.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
index 2f2a13ed766701275c88cd2ed23cf70335243549..ded357c17414ad16b8643b2e03af6a39992ab511 100644 (file)
--- a/arch/powerpc/platforms/4xx/Kconfig
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -3,278 +3,206 @@ config 4xx
        depends on 40x || 44x
        default y
 
-config WANT_EARLY_SERIAL
+config BOOKE
        bool
-       select SERIAL_8250
-       default n
-
-menu "AMCC 4xx options"
-       depends on 4xx
-
-choice
-       prompt "Machine Type"
-       depends on 40x
-       default WALNUT
-
-config BUBINGA
-       bool "Bubinga"
-       select WANT_EARLY_SERIAL
-       help
-         This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
-       bool "CPCI405"
-       help
-         This option enables support for the CPCI405 board.
-
-config EP405
-       bool "EP405/EP405PC"
-       help
-         This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
-       bool "Redwood-5"
-       help
-         This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
-       bool "Redwood-6"
-       help
-         This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
-       bool "Sycamore"
-       help
-         This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
-       bool "Walnut"
-       help
-         This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
-       bool "Xilinx-ML300"
-       help
-         This option enables support for the Xilinx ML300 evaluation board.
-
-endchoice
-
-choice
-       prompt "Machine Type"
        depends on 44x
-       default EBONY
-
-config BAMBOO
-       bool "Bamboo"
-       select WANT_EARLY_SERIAL
-       help
-         This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-       bool "Ebony"
-       select WANT_EARLY_SERIAL
-       help
-         This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
-       bool "Luan"
-       select WANT_EARLY_SERIAL
-       help
-         This option enables support for the IBM PPC440SP evaluation board.
-
-config OCOTEA
-       bool "Ocotea"
-       select WANT_EARLY_SERIAL
-       help
-         This option enables support for the IBM PPC440GX evaluation board.
+       default y
 
-endchoice
+menu "AMCC 40x options"
+       depends on 40x
 
-config EP405PC
-       bool "EP405PC Support"
-       depends on EP405
+#config BUBINGA
+#      bool "Bubinga"
+#      depends on 40x
+#      default n
+#      select 405EP
+#      help
+#        This option enables support for the IBM 405EP evaluation board.
+
+#config CPCI405
+#      bool "CPCI405"
+#      depends on 40x
+#      default n
+#      select 405GP
+#      help
+#        This option enables support for the CPCI405 board.
+
+#config EP405
+#      bool "EP405/EP405PC"
+#      depends on 40x
+#      default n
+#      select 405GP
+#      help
+#        This option enables support for the EP405/EP405PC boards.
+
+#config EP405PC
+#      bool "EP405PC Support"
+#      depends on EP405
+#      default y
+#      help
+#        This option enables support for the extra features of the EP405PC board.
+
+#config REDWOOD_5
+#      bool "Redwood-5"
+#      depends on 40x
+#      default n
+#      select STB03xxx
+#      help
+#        This option enables support for the IBM STB04 evaluation board.
+
+#config REDWOOD_6
+#      bool "Redwood-6"
+#      depends on 40x
+#      default n
+#      select STB03xxx
+#      help
+#        This option enables support for the IBM STBx25xx evaluation board.
+
+#config SYCAMORE
+#      bool "Sycamore"
+#      depends on 40x
+#      default n
+#      select 405GPR
+#      help
+#        This option enables support for the IBM PPC405GPr evaluation board.
+
+#config WALNUT
+#      bool "Walnut"
+#      depends on 40x
+#      default y
+#      select 405GP
+#      help
+#        This option enables support for the IBM PPC405GP evaluation board.
+
+#config XILINX_ML300
+#      bool "Xilinx-ML300"
+#      depends on 40x
+#      default y
+#      select VIRTEX_II_PRO
+#      help
+#        This option enables support for the Xilinx ML300 evaluation board.
 
+endmenu
 
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
+# 40x specific CPU modules, selected based on the board above.
 config NP405H
        bool
-       depends on ASH
-       default y
+       #depends on ASH
 
-config 440EP
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
        bool
-       depends on BAMBOO
-       select PPC_FPU
-       default y
+       #depends on OAK
+       select IBM405_ERR51
 
-config 440GP
+config 405GP
        bool
-       depends on EBONY
-       default y
+       select IBM405_ERR77
+       select IBM405_ERR51
 
-config 440GX
+config 405EP
        bool
-       depends on OCOTEA
-       default y
 
-config 440SP
+config 405GPR
        bool
-       depends on LUAN
-       default y
 
-config 440
+config VIRTEX_II_PRO
        bool
-       depends on 440GP || 440SP || 440EP
-       default y
+       select IBM405_ERR77
+       select IBM405_ERR51
 
-config 440A
+config STB03xxx
        bool
-       depends on 440GX
-       default y
+       select IBM405_ERR77
+       select IBM405_ERR51
 
-config IBM440EP_ERR42
-       bool
-       depends on 440EP
-       default y
+# 40x errata/workaround config symbols, selected by the CPU models above
 
 # All 405-based cores up until the 405GPR and 405EP have this errata.
 config IBM405_ERR77
        bool
-       depends on 40x && !403GCX && !405GPR && !405EP
-       default y
 
 # All 40x-based cores, up until the 405GPR and 405EP have this errata.
 config IBM405_ERR51
        bool
-       depends on 40x && !405GPR && !405EP
-       default y
 
-config BOOKE
-       bool
+menu "AMCC 44x options"
        depends on 44x
-       default y
-
-config IBM_OCP
-       bool
-       depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-       default y
 
-config XILINX_OCP
-       bool
-       depends on XILINX_ML300
-       default y
+#config BAMBOO
+#      bool "Bamboo"
+#      depends on 44x
+#      default n
+#      select 440EP
+#      help
+#        This option enables support for the IBM PPC440EP evaluation board.
 
-config IBM_EMAC4
-       bool
-       depends on 440GX || 440SP
-       default y
-
-config BIOS_FIXUP
-       bool
-       depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-       default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-       bool
-       depends on OAK
-       default y
-
-config 405EP
-       bool
-       depends on BUBINGA
-       default y
-
-config 405GP
-       bool
-       depends on CPCI405 || EP405 || WALNUT
-       default y
-
-config 405GPR
-       bool
-       depends on SYCAMORE
+config EBONY
+       bool "Ebony"
+       depends on 44x
        default y
+       select 440GP
+       help
+         This option enables support for the IBM PPC440GP evaluation board.
 
-config VIRTEX_II_PRO
-       bool
-       depends on XILINX_ML300
-       default y
+#config LUAN
+#      bool "Luan"
+#      depends on 44x
+#      default n
+#      select 440SP
+#      help
+#        This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+#      bool "Ocotea"
+#      depends on 44x
+#      default n
+#      select 440GX
+#      help
+#        This option enables support for the IBM PPC440GX evaluation board.
 
-config STB03xxx
-       bool
-       depends on REDWOOD_5 || REDWOOD_6
-       default y
+endmenu
 
-config EMBEDDEDBOOT
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
        bool
-       depends on EP405 || XILINX_ML300
-       default y
+       select PPC_FPU
+       select IBM440EP_ERR42
 
-config IBM_OPENBIOS
+config 440GP
        bool
-       depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-       default y
+       select IBM_NEW_EMAC_ZMII
 
-config PPC4xx_DMA
-       bool "PPC4xx DMA controller support"
-       depends on 4xx
-
-config PPC4xx_EDMA
+config 440GX
        bool
-       depends on !STB03xxx && PPC4xx_DMA
-       default y
 
-config PPC_GEN550
+config 440SP
        bool
-       depends on 4xx
-       default y
-
-choice
-       prompt "TTYS0 device and default console"
-       depends on 40x
-       default UART0_TTYS0
-
-config UART0_TTYS0
-       bool "UART0"
 
-config UART0_TTYS1
-       bool "UART1"
-
-endchoice
-
-config SERIAL_SICC
-       bool "SICC Serial port support"
-       depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
+config 440A
        bool
-       depends on SERIAL_SICC && UART0_TTYS1
+       depends on 440GX
        default y
 
-config SERIAL_SICC_CONSOLE
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
        bool
-       depends on SERIAL_SICC && UART0_TTYS1
-       default y
-endmenu
 
+#config XILINX_OCP
+#      bool
+#      depends on XILINX_ML300
+#      default y
 
-menu "IBM 40x options"
-       depends on 40x
-
-config SERIAL_SICC
-       bool "SICC Serial port"
-       depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-       bool
-       depends on SERIAL_SICC && UART0_TTYS1
-       default y
+#config BIOS_FIXUP
+#      bool
+#      depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+#      default y
 
-config SERIAL_SICC_CONSOLE
-       bool
-       depends on SERIAL_SICC && UART0_TTYS1
-       default y
+#config PPC4xx_DMA
+#      bool "PPC4xx DMA controller support"
+#      depends on 4xx
 
-endmenu
+#config PPC4xx_EDMA
+#      bool
+#      depends on !STB03xxx && PPC4xx_DMA
+#      default y